Process Data set: IFSI-EMC Pure 1kV 2x16/16mm² FR (en)

Process Data set: IFSI-EMC Pure 1kV 2x16/16mm² FR (en) en

Process information

Key Data Set Information
Location	FI
Geographical representativeness description	Norway
Reference year	2024
Name	IFSI-EMC Pure 1kV 2x16/16mm² FR
Technical purpose of product or process	IFSI-EMC PURE 1KV CU Power cable with up to 1 kV operating voltage. Allowed indoors, outdoors and as a ground cable without extra protection. The Cu screen is 100% tight, has low coupling impedance and meets the EMC directive. The 3-conductor is symmetrically constructed and has a CU screen from 1.5mm². Halogen-free cable is recommended used when it is important to avoid the formation of dense smoke and corrosive gases in the event of an overheating or fire. Cables with AAL screen has a construction with an AL-foil in contact with a massive CU wire. The AL foil has an longitudinal slit and is not 100% covering (slit does not exceed 4mm). When applied to installation with highly sensitive equipment use IFSI-EMC Pure with CU screen. Conductor: Class Round, stranded copper Conductor surface Bare Core insulation material: XLPE Armouring/reinforcement material: Copper, bare Screen construction: Metallized foil Screen: Yes Screen material Copper, bare Concentric conductor: Copper Material inner sheath: Halogen-free polymer Material outer sheath: Halogen-free polymer Cable shape: Round Core colours 2X: Blue, brown
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Prysmian Group Norge AS
Quantitative reference
Reference flow(s)	IFSI-EMC Pure 1kV 2x16/16mm² FR - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 9.83018867E-4 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-06-19" - "2029-06-19"
Publication date	2024-06-19
Technological representativeness
Technology description including background system	IFSI-EMC Pure 1kV 2x16/16mm² FR SAP code: 20216061 El no: 1003805 STANDARDS APPLIED: IEC 60502-1 EN 50575:2014+A1:2016 EN 13501-6, class Cca-s1,d1,a1

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-6927-6310_IFSI-EMC-Pure-1kV-2x16-16mm--FR%281%29.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-12-07T14:48:21
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	736cbe03-fc01-4377-ba17-9cd81198aad8
Date of last revision	2024-06-18T10:45:13.5138958Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-6927-6310
Owner of data set	Prysmian Group Norge AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	6.923	0.03105	0.738	0.04888	0.1551	3.287	0	0.008404	0.003167	0.009699	-2.721
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.02943	0	0	0	0.00002372	0	0	0	-0.02824	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	6.952	0.03105	0.738	0.04888	0.1551	3.287	0	0.008404	-0.02507	0.009699	-2.721
Use of non renewable primary energy (PENRE)	Input	MJ	32.25	2.914	9.425	3.464	0.9643	0.2542	0	0.5956	0.05848	0.09787	-1.534
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	6.611	0	0	0	0.01163	0	-0.03886	0	-5.991	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	38.87	2.914	9.425	3.464	0.9759	0.2542	-0.03886	0.5956	-5.932	0.09787	-1.534
Use of secondary material (SM)	Input	kg	0.1006	0	0.001498	0	0.002042	0	0	0	0	0	0.03831
Use of renewable secondary fuels (RSF)	Input	MJ	0.1366	0.001026	0.0006124	0.00175	0.002805	0.002581	0	0.0003008	0.00006862	0.0002012	0.003248
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.009002	0.002932	0.0007285	0.006246	0.000381	0.00643	0	0.001074	0	0.0001413	-0.1257
Use of net fresh water (FW)	Input	m3	0.1247	0.0002332	0.003338	0.0003648	0.002584	0.02455	0	0.00006272	0.0004748	0.0001253	-0.005915
Hazardous waste disposed (HWD)	Output	kg	0.0189	0.000135	0.008756	0.0001767	0.0008219	0.000163	0	0.00003037	0	0.01313	-0.0015
Non hazardous waste dispose (NHWD)	Output	kg	0.8088	0.08052	0.04749	0.1656	0.0291	0.01955	0	0.02846	0	0.3528	-0.07171
Radioactive waste disposed (RWD)	Output	kg	0.0001209	0.00002007	0.0001603	0.00002362	0.000006511	0.000002273	0	0.000004061	0	6.713E-7	-0.000003223
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.0467	0	0.005876	0	0	0	0.2471	0.00001633	-0.001499
Materials for energy recovery (MER)	Output	kg	0	0	0.0393	0	0.004546	0	0	0	0.188	3.994E-7	-0.0001974
Exported electrical energy (EEE)	Output	MJ	0	0	0.02626	0	0.00634	0	0	0	0.2907	0.00002591	-0.0004836
Exported thermal energy (EET)	Output	MJ	0	0	0.3974	0	0.09593	0	0	0	4.399	0.000392	-0.007317

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	38.7	2.914	9.425	3.464	1.093	0.2538	0.5955	0.05832	0.09787	-1.534
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0007586	0.000003596	0.000001305	0.000006223	0.0000154	0.000001386	0.00000107	4.561E-8	3.259E-8	-0.0001234
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1151	0.003846	0.000325	0.0009391	0.002406	0.0001453	0.0001614	0.00009387	0.00003311	-0.0222
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.02991	0.00007001	0.003955	0.00009367	0.0009992	0.000514	0.0000161	0.01285	0.003083	-0.0006613
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	2.583	0.2077	0.04337	0.2297	0.07057	0.01859	0.03949	0.4411	0.02325	-0.1564
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	2.616	0.2078	0.04738	0.2299	0.07163	0.01918	0.03952	0.454	0.02633	-0.1581
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.002821	0.0001004	0.00005951	0.0000803	0.00006128	0.00007669	0.00001381	0.000001688	0.00000135	-0.001017
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	2.613	0.2078	0.04661	0.2299	0.07147	0.01914	0.03952	0.4484	0.02735	-0.08816
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0009754	0.000001232	0.000001503	0.000001804	0.0000196	0.000001337	3.102E-7	8.139E-8	6.409E-8	-0.0001504
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.006776	0.001009	0.0001018	0.0002785	0.0001649	0.00001597	0.00004788	0.00004485	0.00003738	-0.0009716
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.09874	0.01119	0.001136	0.00308	0.002295	0.0002078	0.0005295	0.0004612	0.0001322	-0.01474
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.02625	0.002949	0.00027	0.000943	0.0006112	0.00005589	0.0001621	0.0001112	0.00004277	-0.004008
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	1.754E-7	4.476E-8	3.955E-8	5.237E-8	6.285E-9	1.275E-9	9.004E-9	9.09E-10	1.248E-9	-0.001858
Water (user) deprivation potential (WDP)	m3 world eqv.	135.5	1.8	4.53	3.304	2.947	44.24	0.5681	0.3923	1.793	2.626

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.1365	0.01264	0.416	0.01514	0.01162	0	0	0	0	0	0.004604	0	0	0.002603	0.0001443	0.0005764	-0.003782
Potential incidence of disease due to PM emissions (PM)²	disease incidence	3.048E-7	1.052E-8	4.811E-9	1.654E-8	6.754E-9	0	0	0	0	0	1.041E-9	0	0	2.843E-9	4.14E-10	6.1E-10	-5.668E-8
Potential Soil quality index (SQP)²	unitless	24.51	1.284	3.487	2.388	0.6388	0	0	0	0	0	0.1278	0	0	0.4106	0.01046	0.2565	-5.004
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000001778	2.209E-9	1.751E-9	2.756E-9	3.571E-8	0	0	0	0	0	1.3E-9	0	0	4.74E-10	1.097E-9	1.18E-10	-2.465E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.351E-8	0	6.9E-11	0	4.72E-10	0	0	0	0	0	5.5E-11	0	0	0	2.3E-11	5E-12	-2.891E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1229	1.931	3.37	2.551	26.79	0	0	0	0	0	1.156	0	0	0.4386	0.8557	102	-204.2