Process Data set: Sense Line 120x1200 Dali (en)

Process Data set: Sense Line 120x1200 Dali (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Sense Line 120x1200 Dali
Technical purpose of product or process	Create your own design in T-profile ceilings with Sense Line 1200. Sense Line is also available in 600mm length. The luminaire has a light steel housing and a 3-layer optical system for low glare with UGR<19. Sense Line is delivered complete with driver and connection box, including Linect connection. Sense Line is available in both phase cut and Dali/Push-dim. The driver has dip switches for flexible light output, and twist connection that enables use of the independent Emergency kit or the Sensor Dim box. Fixing springs are available as accessories for use in plate ceilings. System Wattage: 19.0 W. Luminous flux: 2310 lm. Efficacy: 122 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000, . Light distribution: Direct. Control/Dimming: DALI-2. Luminiare class: Class II SELV. Housing: Sheet steel. Optics: Acrylic (PMMA). Height: 35.0mm. Length: 1195.0 mm. Width: 118.0 mm. EAN: 7021982126956 The EPD also covers the following product: EAN: 7021982126970 - SENSE LINE 120X1200 4000K DALI LINECT Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Sense Line 120x1200 Dali - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.517332285156 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-03-03 - 2030-03-03
Publication date	2025-03-03
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/sense-line/212695/pdf/specification_212695.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/703060_Sense%20Line/50/703060_Sense%20Line.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-9257-8845_Sense-Line-120x1200-Dali.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-03-20T10:22:23
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	70e558b4-9df0-4f1f-b673-04679fdbd2eb
Date of last revision	2025-02-26T20:01:38.719425Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-9257-8845
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	64.7	0.01636	0.7075	0.1895	0.004163	2977	0.0227	0.1123	0.1596	-4.471
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	6.673	0	0	0	-6.673	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	71.37	0.01636	0.7075	0.1895	-6.669	2977	0.0227	0.1123	0.1596	-4.471
Use of non renewable primary energy (PENRE)	Input	MJ	490.6	1.446	8.697	16.68	0.2529	230.2	2.006	0.537	0.5248	-14.36
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	13.57	0	0	0	0	0	0	-14.46	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	504.2	1.446	8.697	16.68	0.2529	230.2	2.006	-13.92	0.5248	-14.36
Use of secondary material (SM)	Input	kg	1.644	0	0	0	0	0	0	0	0.003933	0.004027
Use of renewable secondary fuels (RSF)	Input	MJ	0.2554	0.0003201	0.0003916	0.006121	0.0001381	2.338	0.0004441	0.001069	0.0005136	0.01686
Use of non renewable secondary fuels (NRSF)	Input	MJ	1.356	0.002718	0.00427	0.03335	0.0005692	5.824	0.003771	-0.00004914	0.03411	0.3274
Use of net fresh water (FW)	Input	m3	0.4099	0.0001617	0.005424	0.001455	0.0001193	22.24	0.0002243	0.001075	0.0003541	-0.01399
Hazardous waste disposed (HWD)	Output	kg	0.1893	0.0001307	0.0007248	0.0008467	0	0.1476	0.0001813	0.00002846	0.1883	-0.006273
Non hazardous waste dispose (NHWD)	Output	kg	5.501	0.06941	0.09047	0.5287	1.117	17.71	0.0963	0.04322	0.3578	-0.3755
Radioactive waste disposed (RWD)	Output	kg	0.001308	0.000009489	0.00001689	0.0001142	0	0.002058	0.00001317	0.000001711	6.662E-7	-0.00003169
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.04469	0	1.039	0	0	0.6269	0.00001759	-0.0001576
Materials for energy recovery (MER)	Output	kg	0	0	0.004212	0	0.001211	0	0	0.1961	4.301E-7	-0.00002075
Exported electrical energy (EEE)	Output	MJ	0	0	0.006471	0	0.06391	0	0	0.3012	0.0000279	-0.00005084
Exported thermal energy (EET)	Output	MJ	0	0	0.0979	0	0.9668	0	0	4.557	0.0004221	-0.0007692

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	498.7	1.446	8.697	16.68	0.2528	229.9	2.006	0.5368	0.5243	-14.36
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0112	0.000002625	0.000002232	0.00002288	4.399E-7	0.001256	0.000003642	4.674E-7	2.562E-7	-0.001067
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.3617	0.0002927	0.004902	0.01749	0.00008559	0.1316	0.0004062	0.0002911	0.0002145	-0.06326
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-1.684	0.00003811	0.0001486	0.0004199	1.896	0.4656	0.00005287	0.0001073	0.00003604	-0.002863
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	40.74	0.09786	0.9572	1.179	0.01807	16.84	0.1358	0.5173	0.06346	-1.296
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	39.14	0.09793	0.9575	1.179	1.914	17.37	0.1359	0.5176	0.06384	-1.301
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.08405	0.00003578	0.0001043	0.0005797	0.000005978	0.06947	0.00004964	0.0002329	0.0003444	-0.002398
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	41.02	0.09793	0.9123	1.179	0.01808	17.34	0.1359	0.5176	0.06486	-1.527
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.007155	9.179E-7	0.00001736	0.000007684	1.484E-7	0.001211	0.000001274	0.000001364	0.000001793	-0.0004144
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.04525	0.00005764	0.001142	0.004202	0.00002831	0.01446	0.00007997	0.00008375	0.00007171	-0.003527
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.5763	0.0006445	0.01259	0.04679	0.0003065	0.1882	0.0008942	0.0008964	0.0005239	-0.04802
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1563	0.0002413	0.004746	0.01268	0.00008809	0.05062	0.0003348	0.0002354	0.0002347	-0.01436
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00000883	2.128E-8	3.52E-8	2.595E-7	3.816E-9	0.000001155	2.953E-8	4.564E-9	3.216E-9	-0.002329
Water (user) deprivation potential (WDP)	m3 world eqv.	1241	0.4715	0.812	10.78	0.3205	896.3	0.6541	6.953	2.054	1.214

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.728	0.006009	0.01256	0.07216	0.001082	4.17	0	0.008338	0.002997	0.0012	-0.03642
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002124	6.324E-9	5.75E-8	4.325E-8	1.264E-9	9.433E-7	0	8.778E-9	1.726E-9	3.922E-9	-1.777E-7
Potential Soil quality index (SQP)²	unitless	117.8	0.9907	1.692	8.21	0.1696	115.8	0	1.375	0.1277	1.346	-12.26
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000002406	1.149E-9	4.177E-8	8.565E-9	4.23E-10	0.000001178	0	1.596E-9	6.481E-8	1.328E-9	-2.867E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	5.608E-8	0	2.64E-10	0	1E-11	4.999E-8	0	0	1.088E-9	1.79E-10	-6.469E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2894	1.172	21.66	11.47	0.3372	1047	0	1.626	1.897	99.66	-514.2