Process Data set: Tysnes 66 650 Dali (en)

Process Data set: Tysnes 66 650 Dali (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe.
Reference year	2024
Name	Tysnes 66 650 Dali
Technical purpose of product or process	Tysnes 66 is a tri-proof luminaire for garages, storage rooms and production facilities. It has low power consumption, high lumen output and long lifetime.It can easily be mounted on ceilings with clips or suspended in wires. Sturdy steel clips attached to the luminaire holds the diffuser. It has cable entries in both ends and weakening for cabling from the back.Tysnes 66 comes in 3 lengths and has dip switches on the driver that allows setting the required light level. Also available as emergency light, with a 3-hour battery pack. System Wattage: 14 W. Luminous flux: 2060lm. Efficacy: 147 lm/W. Colour temperature: 4000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000,L90>50,000. Light distribution: Direct. Optic: Opal. Luminiare class: Class I. Housing: UV-stabilized polycarbonate. Height: 80 mm. Length: 650 mm. Width: 85 mm. EAN: 7021981200381. Please note that the above has been calculated with the Norwegian energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Tysnes 66 650 Dali - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0462962963 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-04-19" - "2029-04-19"
Publication date	2024-04-19
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/tysnes/120038/pdf/specification_120038.pdf Link to CE Declaration: https://www.sg-as.com/storage/data/702865_Tysnes/50/702865_Tysnes%2066.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

NEPD-6450-5712_Tysnes-66-650-Dali.pdf

Original EPDs

NEPD-6450-5712_Tysnes-66-650-Dali.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-11-19T11:29:13
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	6f2b7bd8-6e37-47e0-9864-4736b107c204
Date of last revision	2024-04-15T17:14:48.2780557Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-6450-5712-EN
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	22.99	0.02311	0.2635	0.07056	0.0003726	3338	0.01051	0.09666	0.06863	-4.295
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.82	0	0	0	-0.8201	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	23.81	0.02311	0.2635	0.07056	-0.8197	3338	0.01051	0.09666	0.06863	-4.295
Use of non renewable primary energy (PENRE)	Input	MJ	245.7	2.042	3.239	6.212	0.02263	258.1	0.7341	0.7327	0.2541	-15.42
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	13.67	0	0	0	0	0	0	-15.1	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	259.4	2.042	3.239	6.212	0.02263	258.1	0.7341	-14.37	0.2541	-15.42
Use of secondary material (SM)	Input	kg	0.1818	0	0	0	0	0	0	0	0.001664	0.00625
Use of renewable secondary fuels (RSF)	Input	MJ	0.3301	0.000452	0.0001459	0.00228	0.00001236	2.621	0.0003759	0.001605	0.0002404	0.007059
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.1322	0.003838	0.00159	0.01242	0.00005094	6.53	0.001344	-0.00006145	0.01451	0.03552
Use of net fresh water (FW)	Input	m3	0.1872	0.0002283	0.00202	0.0005418	0.00001068	24.93	0.0000785	0.001113	0.0001894	-0.01395
Hazardous waste disposed (HWD)	Output	kg	0.0853	0.0001845	0.0002699	0.0003154	0	0.1655	0.00003786	0.00003073	0.07937	-0.004927
Non hazardous waste dispose (NHWD)	Output	kg	2.412	0.09802	0.0337	0.1969	0.1	19.85	0.0357	0.04196	0.2954	-0.2704
Radioactive waste disposed (RWD)	Output	kg	0.0005865	0.0000134	0.000006292	0.00004254	0	0.002308	0.000005	0.000001556	4.911E-7	-0.00004398
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.01665	0	0.09301	0	0	0.2069	0.00002141	-0.0002446
Materials for energy recovery (MER)	Output	kg	0	0	0.001569	0	0.006991	0	0	0.2387	5.237E-7	-0.00003221
Exported electrical energy (EEE)	Output	MJ	0	0	0.00241	0	0.00572	0	0	0.3668	0.00003397	-0.00007891
Exported thermal energy (EET)	Output	MJ	0	0	0.03646	0	0.08653	0	0	5.549	0.000514	-0.001194

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	259.3	2.042	3.239	6.212	0.02263	257.7	0.734	0.7325	0.2538	-15.41
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.004131	0.000003707	8.313E-7	0.000008523	3.937E-8	0.001408	0.000001341	5.524E-7	1.19E-7	-0.001532
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1539	0.0004134	0.001826	0.006515	0.00000766	0.1475	0.0001395	0.0003858	0.0001015	-0.06948
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.07576	0.00005382	0.00005533	0.0001564	0.1698	0.522	0.00002009	0.0001375	0.00001685	-0.003118
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	21.62	0.1382	0.3565	0.4389	0.001618	18.88	0.04855	0.6325	0.04449	-1.25
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	21.58	0.1383	0.3566	0.4391	0.1714	19.48	0.04858	0.6328	0.04465	-1.256
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.02896	0.00005053	0.00003884	0.0002159	5.35E-7	0.07788	0.00001728	0.0001507	0.000146	-0.002673
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	21.74	0.1383	0.3398	0.4391	0.001618	19.44	0.04858	0.6327	0.04549	-1.339
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.002558	0.000001296	0.000006465	0.000002862	1.328E-8	0.001358	3.879E-7	0.000002213	7.72E-7	-0.0003976
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.02286	0.0000814	0.0004255	0.001565	0.000002534	0.01621	0.00002761	0.0001066	0.00005271	-0.003705
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.2628	0.0009102	0.004689	0.01743	0.00002743	0.2111	0.0003088	0.001142	0.0002645	-0.05042
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.08612	0.0003408	0.001768	0.004723	0.000007884	0.05676	0.0001183	0.0002981	0.0001153	-0.0147
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00001025	3.006E-8	1.311E-8	9.666E-8	3.42E-10	0.000001295	1.1E-8	5.306E-9	1.804E-9	-0.002344
Water (user) deprivation potential (WDP)	m3 world eqv.	540.6	0.6659	0.3024	4.013	0.02868	4.493E+4	0.71	6.908	1.07	-24.59

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.7536	0.008487	0.004678	0.02688	0.00009683	4.676	0	0.003208	0.00356	0.0006546	-0.05106
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.00000124	8.935E-9	2.142E-8	1.611E-8	1.13E-10	0.000001058	0	2.972E-9	2.348E-9	1.883E-9	-1.669E-7
Potential Soil quality index (SQP)²	unitless	67.76	1.399	0.6303	3.058	0.01518	129.8	0	0.5134	0.1734	0.6988	-13.32
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	9.582E-7	1.625E-9	1.555E-8	3.19E-9	3.8E-11	0.00000132	0	5.94E-10	6.35E-8	5.8E-10	-1.85E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.612E-8	0	9.8E-11	0	1E-12	5.605E-8	0	0	1.085E-9	7.6E-11	-3.715E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1397	1.655	8.066	4.271	0.03018	1174	0	0.5441	2.365	34.85	-508.6