Process information
| Key Data Set Information | |
| Location | SE |
| Geographical representativeness description | Europe |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | Product stage – Raw materials A1 Lintex has long term relations with its suppliers, and a continuous dialogue about environmental performance when extracting and producing raw materials and components. All wood based materials are labelled with FSC ® (FSC-C170086) and standard fabrics are certified with EU Ecolabel or Oekotex. Waste and energy use at the suppliers are included in A1, as well as production of packaging material. Product stage – Transport A2 Transports are done by truck and/or ship from the supplier to Lintex manufacturing site in Nybro, Sweden. Product stage – Manufacturing A3 Manufacturing takes place in Nybro, Sweden and includes cutting, assembling and packaging. From 2022 and onward, the factory in Nybro is a net producer of renewable energy, thanks to geothermal heating and 4400 solar panels installed on our factory roof, producing around 1600 MWh annually. |
| Technical purpose of product or process | Boarder Textile is a classic noticeboard with a thin aluminium frame and concealed fittings, suited for use in environments such as schools, offices and conference premises. The product is available in five standard sizes and in five standard fabrics. Boader Textile consists of a wooden board draped with fabric, either linen, wool, polyester or recycled polyester. The frame and the concealed wall fittings are made of extruded aluminium. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-03-26 - 2030-03-26 |
| Technological representativeness | |
| Technology description including background system | This EPD is based on Boarder Textile in size 1005 x 1205 mm with polyester fabric. The other standard sizes; 1505 x 1205 mm, 2005 x 1205 mm, 2505 x 1205 mm and 3005 x 1205 mm, are found in the chapter "Variants". Depth from wall is 20 mm. Fittings are concealed. Boarder Textile is labelled with FSC Mix (FSC-C170086). The standard fabrics used are labeled with EU Ecolabel or Oekotex 100. |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-06-13T09:23:27 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 6a1d6a2c-3a7d-4e93-866e-683d67b1e30a |
| Date of last revision | 2025-03-21T14:07:35.829974Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-9462-9102 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle