Process Data set: Farsund Slim 300 900lm (en)

Process Data set: Farsund Slim 300 900lm (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Farsund Slim 300 900lm
Technical purpose of product or process	Ultra-slim ceiling light for indoor lighting, suitable for both ceiling and wall mounting. The fixture is made of durable polycarbonate, and with its opal-prismatic diffuser, it provides a pleasant, uniform, and efficient light with a long lifespan. It is dimmable with phase-cut dimmers, and we recommend LEDDim 400 and LEDDim Smart. Effortless installation with two cable entries, a backplate that fits all standard ceiling boxes, and a quick-connector to the front panel which is easily assembled with practical magnets. Visible cabling is also possible. System Wattage: 7.5 W. Luminous flux: 930 lm. Efficacy: 124 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM:3. Lifetime: L80/B20>100,000, L90/B50>50,000. Light distribution: Direct. Control/Dimming: Trailing edge. Luminiare class: Class II. Housing: Polycarbonat (PC). Optics: Plastic, opal. Height: 29.0mm. Diameter: 302.0 mm. EAN: 7021981133016. The EPD also covers the following products: EAN: 7021981133009 - FARSUND SLIM 300 WHITE 900LM 2700K EAN: 7021981133023 - FARSUND SLIM 300 WHITE 900LM 4000K EAN: 7021981133061 - FARSUND SLIM 300 BLACK 900LM 2700K EAN: 7021981133078 - FARSUND SLIM 300 BLACK 900LM 3000K EAN: 7021981133085 - FARSUND SLIM 300 BLACK 900LM 4000K Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Farsund Slim 300 900lm - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.10219426971 kg
Time representativeness
Data set valid until	2030
Publication date	0001-01-03
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/int/en/pdf/article/113301/703525/specification_113301.pdf Link to CE Declaration: https://www.sg-as.com/int/en/file/techfile/BQ2B/CE-UKCA251112A_Farsund%20Slim.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-14508-14991_Farsund-Slim-300-900lm.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-12-17T16:09:05
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	68b56e98-5bfe-4080-acf8-6892420f1e13
Date of last revision	2025-12-17T13:36:56.2722022Z
Data set version	00.02.001
Registration authority	EPD Norway
Registration number	NEPD-14508-14991
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	14.04	0.028	0.2909	0.08194	0.0008107	1057	0.009819	0.03224	0.02258	-5.418
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	2.658	0	0	0	-2.658	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	16.7	0.028	0.2909	0.08194	-2.657	1057	0.009819	0.03224	0.02258	-5.418
Use of non renewable primary energy (PENRE)	Input	MJ	129.6	0.1849	3.408	7.213	0.04925	81.69	0.8676	0.3003	0.1455	-6.286
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	20.43	0	0	0	0	0	0	-20.82	0	0.06281
Total use of non renewable primary energy resource (PENRT)	Input	MJ	1.5E+2	0.1849	3.408	7.213	0.04925	81.69	0.8676	-20.52	0.1455	-6.223
Use of secondary material (SM)	Input	kg	0.3132	0	0	0	0	0	0	0	0.0004442	0.001648
Use of renewable secondary fuels (RSF)	Input	MJ	0.1597	0.0000389	0.0001343	0.002647	0.00002689	0.8297	0.0001921	0.0005633	0.0001526	0.001817
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.1111	0.0003303	0.001614	0.01442	0.0001109	2.067	0.001631	-0.00001674	0.004074	-0.1914
Use of net fresh water (FW)	Input	m3	0.09831	0.0002038	0.001438	0.0006292	0.00002324	7.891	0.00009702	0.001108	0.0001476	-0.01109
Hazardous waste disposed (HWD)	Output	kg	0.04069	0.0001187	0.0002921	0.0003662	0	0.05238	0.0000784	0.000008385	0.02265	-0.0009933
Non hazardous waste dispose (NHWD)	Output	kg	0.997	0.01553	0.04317	0.2287	0.2176	6.284	0.04165	0.01147	0.4067	-0.1276
Radioactive waste disposed (RWD)	Output	kg	0.0002344	0.000001194	0.000005679	0.0000494	0	0.0007305	0.000005694	4.255E-7	6.46E-7	-0.0000208
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.02471	0	0.2024	0	0	0.1174	0.0000331	-0.00006345
Materials for energy recovery (MER)	Output	kg	0	0	0.001793	0	0.01172	0	0	0.369	8.095E-7	-0.000003875
Exported electrical energy (EEE)	Output	MJ	0	0	0.002755	0	0.01245	0	0	0.5683	0.00005252	-0.00001275
Exported thermal energy (EET)	Output	MJ	0	0	0.04169	0	0.1883	0	0	8.599	0.0007945	-0.0001929

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	145.2	0.2015	3.407	7.213	0.04924	81.57	0.8676	0.3003	0.1454	-6.228
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.002006	3.914E-7	8.815E-7	0.000009896	8.567E-8	0.0004456	0.000001575	2.278E-7	5.747E-8	-0.000417
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.06991	0.00004802	0.001944	0.007565	0.00001667	0.04669	0.0001757	0.0002614	0.00005331	-0.0201
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.3024	0.00001295	0.00005612	0.0001816	0.3735	0.1652	0.00002287	0.00005358	0.000007631	-0.001441
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	11.55	0.01347	0.3784	0.5097	0.00352	5.976	0.05872	0.8951	0.04709	-0.508
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	11.27	0.01349	0.3785	0.5099	0.3771	6.166	0.05876	0.8952	0.04714	-0.5137
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.01851	0.000006945	0.00004095	0.0002507	0.000001164	0.02465	0.00002147	0.00004489	0.00003979	-0.004303
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	11.64	0.01349	0.3599	0.5099	0.003521	6.153	0.05876	0.8951	0.04714	-0.5049
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0008369	1.889E-7	0.000007096	0.000003323	2.89E-8	0.0004298	5.508E-7	7.547E-7	2.436E-7	-0.0001175
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.01074	0.000009137	0.0004416	0.001817	0.000005513	0.005132	0.00003459	0.0001033	0.00005971	-0.001234
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.1198	0.000102	0.004867	0.02023	0.00005968	0.0668	0.0003867	0.001074	0.0001749	-0.01617
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.04109	0.00003924	0.001727	0.005484	0.00001716	0.01796	0.0001448	0.0002651	0.0000679	-0.004772
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	4.846E-7	2.622E-9	1.147E-8	1.122E-7	7.43E-10	4.098E-7	1.277E-8	2.977E-9	1.526E-9	-0.003711
Water (user) deprivation potential (WDP)	m3 world eqv.	326	0.05782	0.2772	4.66	0.06241	318.1	0.2829	2.586	1.066	-76.96

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.2892	0.0007974	0.004367	0.03121	0.0002107	1.48	0	0.003606	0.001231	0.0005632	-0.02377
Potential incidence of disease due to PM emissions (PM)²	disease incidence	7.107E-7	1.116E-9	2.353E-8	1.871E-8	2.46E-10	3.348E-7	0	3.796E-9	1.331E-9	1.021E-9	-7.568E-8
Potential Soil quality index (SQP)²	unitless	59.94	0.1682	0.676	3.551	0.03304	41.08	0	0.5945	0.06534	0.4657	-7.68
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	3.57E-7	2.02E-10	1.395E-8	3.704E-9	8.2E-11	4.179E-7	0	6.9E-10	1.919E-8	2.2E-10	-5.521E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	9.596E-9	2.9E-11	1E-10	0	1E-12	1.774E-8	0	0	3.38E-10	2.2E-11	-1.442E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	494	0.1568	8.847	4.959	0.06567	371.6	0	0.7033	2.102	22.67	-144.5