Process Data set: EPS Lightbeton 360 (en)

Process Data set: EPS Lightbeton 360 (en) en

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	European market
Reference year	2025
Name	EPS Lightbeton 360
Use advice for data set	This EPD covers the life cycle modules A1–A3 (raw material extraction, transport to factory, and production). Modules A4–A5 (transport to storage and further to market with subsequent consumption). B1-B7 (use phase) is not included. C1–C4 (end-of-life phase) and D (potential benefits from recycling) are included. The system boundaries are defined according to EN 15804+A2.
Technical purpose of product or process	EPS Lightbeton 360 is a lightweight, fast-drying floor screed designed for creating strong, insulated subfloors in both dry and wet indoor environments. The product can be used for floor fill in applications with a high finished floor level or for building up concrete-like finished floors on wooden joist constructions, with surface coverings using Mira’s levelling compounds - Can be applied on wooden joists - Ready for top covering after 20–30 hours - Dust-reduced
Classification	Class name : Hierarchy level EPDNorge: Construction / Technical-chemical building materials products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Mira Byggeprodukter AS
Quantitative reference
Reference flow(s)	EPS Lightbeton 360 - 1.0 * 1.0 kg (Mass)
Biogenic carbon content	Carbon content (biogenic): 1.0 kg Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-12-14 - 2030-12-14
Publication date	2025-12-14
Technological representativeness

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 009:2021 Part B for Technical - Chemical products for building and construction industry

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 009:2021 Part B for Technical - Chemical products for building and construction industry

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-12725-12978_EPS-Lightbeton-360.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Linda Høibye

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-12-14T16:11:48
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	67fb68a7-b88d-461c-a754-850305ffcf3a
Date of last revision	2025-10-23T10:08:36.0290124Z
Data set version	00.02.001
Registration authority	EPD Norway
Registration number	NEPD-12725-12978
Owner of data set	Mira Byggeprodukter AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Production A1-A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	0.6711	0.004303	0.2449	0.002391	0	0.00302	-0.1053
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.2562	0	-0.2334	0	-0.01801	0	-0.1538
Total use of renewable primary energy resource (PERT)	Input	MJ	0.9272	0.004303	0.01148	0.002391	-0.01801	0.00302	-0.2591
Use of non renewable primary energy (PENRE)	Input	MJ	12.44	0.2458	0.4184	0.1366	0	0.1465	-0.03669
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	3.662	0	-0.1722	0	-0.02148	0	-0.01016
Total use of non renewable primary energy resource (PENRT)	Input	MJ	16.11	0.2458	0.2462	0.1366	-0.02148	0.1465	-0.04685
Use of secondary material (SM)	Input	kg	0.00001213	0	2.425E-7	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.008231	0.000001443	0.0001653	8.018E-7	0	8.727E-7	-0.005188
Use of non renewable secondary fuels (NRSF)	Input	MJ	0	0	0	0	0	0	-7.707E-8
Use of net fresh water (FW)	Input	m3	0.01053	0.00003349	0.00126	0.00001861	0	0.000167	-0.00004053
Hazardous waste disposed (HWD)	Output	kg	0.009364	0.0003573	0.001257	0.0001985	0	0.0001104	-0.000201
Non hazardous waste dispose (NHWD)	Output	kg	0.3422	0.007541	0.05866	0.00419	0	0.002652	-0.005129
Radioactive waste disposed (RWD)	Output	kg	0.000001749	0.0000788	0.000003258	0.00004378	0	0	-7.302E-8
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.00009029	0	0.01245	0	0	5.542E-7	0
Materials for energy recovery (MER)	Output	kg	5.8E-11	0	1.58E-10	0	0	2.184E-9	0
Exported electrical energy (EEE)	Output	MJ	8.723E-7	0	0.000001599	0	0	0.0000164	0
Exported thermal energy (EET)	Output	MJ	0.000001617	0	0.000002739	0	0	0.000006765	0

Core environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	16.33	0.2458	0.4961	0.1366	0	0.1465	-0.04683
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.000002625	5.818E-8	3.496E-7	3.232E-8	0	7.502E-9	-1.533E-8
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.008155	0.00003635	0.0002252	0.0000202	0	0.00003663	-0.00001476
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.009573	0.00001349	0.04492	0.000007494	0.001027	0.00001517	0.01579
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	1.251	0.01747	0.04304	0.009707	0	0.005882	-0.002679
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	1.242	0.01749	0.088	0.009718	0.001027	0.005898	0.0131
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.000398	0.000006273	0.00004846	0.000003485	0	0.000001066	-0.00001353
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	1.253	0.01749	0.04316	0.009718	0	0.005885	-0.002698
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0002425	0.000001176	0.00001187	6.536E-7	0	2.653E-7	-9.214E-7
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.001612	0.000008733	0.00004608	0.000004851	0	0.00001567	-0.000004488
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.01759	0.00009423	0.0004974	0.00005235	0	0.0001714	-0.0000504
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.006401	0.00006049	0.000167	0.0000336	0	0.00006918	-0.00002193
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	7.003E-9	3.68E-10	3.68E-10	2.05E-10	0	2.19E-10	-1.143E-9
Water (user) deprivation potential (WDP)	m3 world eqv.	0.319	0.001222	0.02399	0.0006788	0	0.0005018	-0.001747

Additional environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.05196	0.0003171	0.004434	0	0.0001761	0	0.0001248	-0.0002809
Potential incidence of disease due to PM emissions (PM)²	disease incidence	1.629E-8	1.289E-9	8.06E-10	0	7.16E-10	0	9.27E-10	-2.69E-10
Potential Soil quality index (SQP)²	unitless	4.357	0.1486	0.3626	0	0.08254	0	0.2968	-1.405
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	1.065E-8	1.84E-10	5.66E-10	0	1.02E-10	0	2.2E-11	-3.1E-11
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.606E-9	0	5.8E-11	0	0	0	1E-12	-1.7E-11
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	17.67	0.0327	0.4245	0	0.01817	0	0.007842	-0.01247