Process Data set: Sense Pro 600x600 (en)

Process Data set: Sense Pro 600x600 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe.
Reference year	2024
Name	Sense Pro 600x600
Technical purpose of product or process	The Sense panel is well designed and only 10 mm high. A narrow frame ensures attractive look and high efficiency.Sense can be mounted to visible T-rail ceilings without accessories and to concealed T-rail ceilings, DAMPA clip-in ceilings, Troldtekt acoustic panels and Gypsum, and surface-mounted using accessories. This makes Sense an all-round quality panel that can be used everywhere. Sense is available in several lumen packages, phase-dimming or DALI depending on which driver kit is selected (accessory). Colour temperature: 3000 K. Colour rendering: Ra>80. MacAdams factor: SDCM:3 . Lifetime: L80/B20>100,000, L90>50.000. Light distribution: Direct. Optic: Plastic opal prism. Luminiare class: Class III. Contains light source of energy class: C. Housing: Aluminium. Height: 11 mm. Length: 597 mm. Width: 597 mm EAN: 7021982126703. The EPD also covers the following products: EAN: 7021982126710 - SENSE PRO 600X600 4000K RA>80 EAN: 7021982126727 - SENSE PRO 600X600 3000K RA>90 EAN: 7021982126734 - SENSE PRO 600X600 4000K RA>90 EAN: 7021982126789 - SENSE PRO 600X600 SORT 3000K RA>80 EAN: 7021982126796 - SENSE PRO 600X600 SORT 4000K RA>80 Please note that the above has been calculated with the Norwegian energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Sense Pro 600x600 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.19444444446 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-01-08" - "2029-01-08"
Publication date	2024-01-08
Technological representativeness
Technology description including background system	Link to the CE Declaration on our website: https://www.sg-as.com/storage/data/703075_Sense%20Pro/50/703075_Sense%20Pro.pdf Link to product data on our website: https://www.sg-as.com/products/sense-pro-600x600/212670

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

NEPD-5721-5015_Sense-Pro-600x600.pdf

Original EPDs

NEPD-5721-5015_Sense-Pro-600x600.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-11-18T13:40:25
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	6438625e-5457-4519-a82d-d56ede4721f4
Date of last revision	2023-12-27T13:09:32.1956261Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-5721-5015-EN
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	14.76	0.02788	0.8414	0.3875	0.001565	0.03355	0.01977	0.02465	-12.65
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	3.444	0	0	0	-3.444	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	18.21	0.02788	0.8414	0.3875	-3.443	0.03355	0.01977	0.02465	-12.65
Use of non renewable primary energy (PENRE)	Input	MJ	320.4	2.464	10.34	31.16	0.09505	2.344	0.298	0.2834	-14.34
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	44.33	0	0	0	0	0	-44.33	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	361.6	2.464	10.34	31.16	0.09505	2.344	-44.03	0.2834	-14.34
Use of secondary material (SM)	Input	kg	0.3083	0	0	0	0	0	0	0.001463	0.00414
Use of renewable secondary fuels (RSF)	Input	MJ	0.04554	0.0005453	0.0004657	0.01308	0.0000519	0.0012	0.0004067	0.0004317	0.02319
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.01711	0.00463	0.005077	0.06041	0.000214	0.004292	-3.334E-7	0.00136	0.1718
Use of net fresh water (FW)	Input	m3	0.1452	0.0002755	0.00645	0.002941	0.00004485	0.0002506	0.002264	0.0003497	-0.02677
Hazardous waste disposed (HWD)	Output	kg	0.09044	0.0002226	0.0008619	0.001591	0	0.0001209	2.877E-7	0.01542	-0.001735
Non hazardous waste dispose (NHWD)	Output	kg	2.42	0.1183	0.1076	1.18	0.42	0.114	0.0005283	1.072	-0.4863
Radioactive waste disposed (RWD)	Output	kg	0.0003091	0.00001617	0.00002009	0.000213	0	0.00001597	2.299E-8	0.000001822	-0.00003377
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.05315	0	0.3906	0	0.8535	0.00007535	-0.000162
Materials for energy recovery (MER)	Output	kg	0	0	0.005009	0	0.02936	0	0.8138	0.00003371	-0.00002133
Exported electrical energy (EEE)	Output	MJ	0	0	0.007695	0	0.02402	0	1.25	0.0003992	-0.00005227
Exported thermal energy (EET)	Output	MJ	0	0	0.1164	0	0.3634	0	18.92	0.00604	-0.0007907

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	322.5	2.463	10.34	31.16	0.09505	2.344	0.2979	0.2834	-14.34
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0003761	0.000004473	0.000002654	0.00004791	1.654E-7	0.000004282	2.215E-7	9.592E-8	-0.00002895
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1438	0.0004988	0.005829	0.02295	0.00003217	0.0004455	0.000435	0.00009658	-0.01089
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.4271	0.00006492	0.0001767	0.0008094	0.713	0.00006416	0.00004933	0.000009289	-0.003111
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	24.34	0.1667	1.138	2.151	0.006794	0.155	1.93	0.09773	-1.358
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	23.93	0.1669	1.139	2.152	0.7198	0.1551	1.93	0.09775	-1.375
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.0233	0.00006096	0.000124	0.0009561	0.000002247	0.00005517	0.00001647	0.00001298	-0.01407
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	24.62	0.1669	1.085	2.152	0.006796	0.1551	1.929	0.1008	-1.692
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001196	0.000001564	0.00002064	0.00001512	5.578E-8	0.000001238	5.027E-7	1.994E-7	-0.00009387
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.02225	0.0000982	0.001359	0.005422	0.00001064	0.00008815	0.0002041	0.0001304	-0.001592
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.2187	0.001098	0.01497	0.0604	0.0001152	0.0009859	0.002094	0.0003764	-0.01744
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.08862	0.0004112	0.005644	0.01691	0.00003311	0.0003777	0.0005057	0.0001291	-0.006591
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	6.79E-7	3.626E-8	4.185E-8	4.783E-7	1.434E-9	3.511E-8	4.318E-9	3.617E-9	-0.00799
Water (user) deprivation potential (WDP)	m3 world eqv.	460.7	0.8033	0.9656	23.77	0.1205	2.267	2.098	3.761	-282.4

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.3239	0.01024	0.01494	0.1353	0.0004067	0	0.01024	0.0008285	0.001485	-0.03677
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001387	1.078E-8	6.838E-8	9.73E-8	4.75E-10	0	9.49E-9	1.94E-9	1.858E-9	-1.558E-7
Potential Soil quality index (SQP)²	unitless	51.1	1.688	2.013	17.69	0.06376	0	1.639	0.05363	0.8856	-11.34
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	4.767E-7	1.959E-9	4.967E-8	1.936E-8	1.59E-10	0	1.898E-9	5.875E-9	3.04E-10	1.728E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	3.305E-8	0	3.14E-10	0	4E-12	0	0	1.23E-10	1.6E-11	-5.26E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	667.2	1.997	25.75	22.03	0.1268	0	1.737	4.119	156.7	-83.07