Key Data Set Information | |
Location | EE |
Geographical representativeness description | Nordic |
Reference year | 2024 |
Name |
|
Use advice for data set | The analysis is a cradle-to-grave study of one luminaire manufactured and installed, used according to a specific lighting regime over a specific lifetime, including waste treatment at end-of-life. A1-A5 includes the extraction and production of raw materials, transportation to the production site, the production process itself, transport to the market and assembly. B6 is the operational energy use stage of the luminaire based on a scenario. C1-C4 includes de-installation of the luminaire, average transport between building site and waste treatment facility, waste processing and disposal. Waste treatment of the product follows the default values provided in EN 50693. D shows the recyclability of metals and plastics, and allows the producers a credit for the net scrap that is produced at the end of a product’s life. The benefits from recycling of net scrap are described in formula from EN 15804:2012+A2:2019. Substitution of heat and electricity generated by the incineration with energy recovery of plastic insulation and other parts is also calculated in module D. |
Technical purpose of product or process | A41-W is a slim LED luminaires for mounting under cabinets, benches and shelves in kitchens or utility rooms. Easy installation via keyhole slots on the upper side and a wide hinged slot. This environmental product declaration can be used for the following luminaires: A41121230: A41-W600 LED 800 HF 830 A41121240: A41-W600 LED 800 HF 840 |
Classification |
Class name
:
Hierarchy level
|
General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances. |
Copyright | Yes |
Owner of data set | |
Quantitative reference | |
Reference flow(s) |
|
Biogenic carbon content |
|
Time representativeness | |
Data set valid until | 2029 |
Time representativeness description | "2024-04-09" - "2029-04-09" |
Technological representativeness | |
Technology description including background system | Please visit the product page on our website for more technical information. https://www.glamox.com |
Subtype | specific dataset | ||||
LCA methodology report | |||||
Data sources, treatment and representativeness | |||||
Documentation of data quality management | |||||
Data source(s) used for this data set | |||||
Completeness | |||||
Validation | |||||
| |||||
Compliance Declarations |
Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Data generator | |
Data set generator / modeller |
|
Data entry by | |
Time stamp (last saved) | 2024-08-18T17:58:45 |
Data set format(s) | |
Publication and ownership | |
UUID | 62c77e32-bd66-4a3f-9336-c8ba27d36866 |
Date of last revision | 2024-04-03T16:38:17.2383657Z |
Data set version | 00.03.000 |
Registration authority | |
Registration number | NEPD-6395-5655 |
Owner of data set | |
Copyright | Yes |
License type | Free of charge for all users and uses |
Access and use restrictions | None |
Indicators of life cycle