Close Go back Collapse all sections
Process Data set: weberbase 130 lättbetongputs B (en) en

Key Data Set Information
Location SE
Geographical representativeness description Sweden
Reference year 2022
Name
weberbase 130 lättbetongputs B
Use advice for data set All processes from raw material extraction, product transport, the construction site, assembly, end of product life and beyond the system boundaries are included in the analysis. The basic production process involves mixing of various raw materials. The flow chart below illustrates the system boundaries for the full life cycle analysis.
Technical purpose of product or process weberbase 130 lättbetongputs B is a factory made dry mortar based on cement and lime with well graded natural sand as aggregates. When mixed with water, it's ready to use render for indoor and outdoor use. The render are sprayable and pumpable in a 60m hose. base 130 can be delivered in closed silos of 10 tons with a flow mixer to avoid dust. The composition of the product is described in the following table:
Classification
Class name : Hierarchy level
  • EPDNorge: Construction / Technical-chemical building materials products
General comment on data set Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Time representativeness
Data set valid until 2027
Time representativeness description "01.08.2022" - "01.08.2027"
Technological representativeness
Technology description including background system weberbase 130 lättbetongputs B is tested and approved according to EN 998-1. Mortar category: CS III For further information, see www.se.weber

Indicators of life cycle

IndicatorDirectionUnit Production
A1-A3
 Transport
A4
 Installation
A5
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
Input
  • 1.239
  • 0.007423
  • 0.2849
  • 0.0003
  • 0.001237
  • 0.002561
  • 0.000119
  • -0.01284
Input
  • 0.4511
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 1.69
  • 0.007423
  • 0.2849
  • 0.0003
  • 0.001237
  • 0.002561
  • 0.000119
  • -0.01284
Input
  • 1.939
  • 0.4233
  • 0.1488
  • 0.05524
  • 0.07055
  • 0.005003
  • 0.01478
  • -0.05252
Input
  • 0.1131
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 2.053
  • 0.4233
  • 0.1488
  • 0.05524
  • 0.07055
  • 0.005005
  • 0.01478
  • -0.05252
Input
  • 0.00236
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0.0162
  • 0
  • 0.00001446
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0.000914
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Input
  • 0.001534
  • 0.00009977
  • 0.00001748
  • 0.00000475
  • 0.00001663
  • 0.000001255
  • 0.000016
  • -0.001035
Output
  • 0.00002189
  • 2.25E-7
  • 3.459E-8
  • 1.5E-7
  • 3.75E-8
  • 4.62E-9
  • 2.2E-8
  • -2.104E-7
Output
  • 0.04525
  • 0.03842
  • 0.001254
  • 0.00025
  • 0.006403
  • 0.00005641
  • 0.1
  • -0.001854
Output
  • 0.000006251
  • 0.000002962
  • 5.198E-7
  • 3.824E-7
  • 4.936E-7
  • 5.262E-8
  • 9.668E-8
  • -3.82E-7
Output
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0.00013
  • 0
  • 0.00576
  • 0
  • 0
  • 0.2257
  • 0
  • 0
Output
  • 0.0000709
  • 0
  • 0.02164
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0.00001728
  • 0
  • 0.01957
  • 0
  • 0
  • 0
  • 0
  • 0
Output
  • 0.0001313
  • 0
  • 0.2152
  • 0
  • 0
  • 0
  • 0
  • 0

IndicatorUnit Production
A1-A3
 Transport
A4
 Installation
A5
 De-construction
C1
 Transport
C2
 Waste processing
C3
 Disposal
C4
 Recycling Potential
D
  • 1.807
  • 0.4105
  • 0.01382
  • 0.0547
  • 0.06842
  • 0.001909
  • 0.01457
  • -0.03812
  • 2.123E-7
  • 5.91E-8
  • 4.702E-9
  • 1.7E-11
  • 9.85E-9
  • 1.2E-11
  • 1E-11
  • -1.91E-10
  • 0.0006702
  • 0.00008507
  • 0.00000692
  • 0.00002985
  • 0.00001418
  • 9.927E-7
  • 0.00000378
  • -0.00002067
  • 0.2306
  • 0.02616
  • 0.00844
  • 0.00396
  • 0.004361
  • 0.0001963
  • 0.000518
  • -0.003573
  • 0.000181
  • 0.00001427
  • 0.00000181
  • 0.000006535
  • 0.000002379
  • 1.76E-7
  • 6.672E-7
  • -0.000003674
  • 0.00003578
  • 0.00000423
  • 2.661E-7
  • 6.632E-7
  • 7.05E-7
  • 3.603E-8
  • 1.582E-7
  • -9.303E-7
  • 1.321E-8
  • 5.1E-9
  • 3.68E-10
  • 6.86E-10
  • 8.5E-10
  • 4E-11
  • 1.72E-10
  • -4.62E-10