Process Data set: Rax Soft 150 TW (en)

Process Data set: Rax Soft 150 TW (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Rax Soft 150 TW
Technical purpose of product or process	Rax Soft 150 TW is a high-performance downlight for lighting in public buildings, offices, corridors etc with an excellent light control by a combination of optimized lens and reflector optics. Available with satin matt reflector for high efficiency. Rax Soft 150 TW is installed easily with springs that fit ceiling panels with a thickness of 1–50 mm.Tunable White 2700-6500K LEDDim or DALI Type 8. System Wattage: 28.0 W. Luminous flux: 2600lm (@6500K). Efficacy: 93 lm/W. Colour temperature: 2700-6500K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L90/B10>100,000, . Light distribution: Direct. Control/Dimming: Tunable White LEDDim. Luminiare class: Class II SELV. Housing: Flame retardant polycarbonate. Optics: Polycarbonat (PC). Height: 83.0mm. Diameter: 166,00mm. Cut-out: 150,00mm. EAN: 7021982125744 Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Rax Soft 150 TW - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.079752271145 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-01-31 - 2030-01-31
Publication date	2025-01-31
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/rax-soft-150-tw/212574/pdf/specification_212574.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/702715_Rax%20Soft%20150%20TW/50/702715_Rax%20Soft%20150%20TW.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8876-8528_Rax-Soft-150-TW-.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-02-10T15:47:33
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	61eed795-2a52-49e6-a48f-a96d4d56a1b7
Date of last revision	2025-01-27T13:40:37.8652739Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-8876-8528
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	17.41	0.001468	0.3228	0.06361	0.0006415	3984	0.008006	0.06601	0.03916	-2.524
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	1.044	0	0	0	-1.044	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	18.46	0.001468	0.3228	0.06361	-1.044	3984	0.008006	0.06601	0.03916	-2.524
Use of non renewable primary energy (PENRE)	Input	MJ	151.9	0.1298	3.208	5.599	0.03897	308	0.7074	0.5308	0.164	-8.222
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	8.874	0	0	0	0	0	0	-9.825	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	160.8	0.1298	3.208	5.599	0.03897	308	0.7074	-9.294	0.164	-8.222
Use of secondary material (SM)	Input	kg	0.5036	0	0	0	0	0	0	0	0.0008561	0.002542
Use of renewable secondary fuels (RSF)	Input	MJ	0.2349	0.00002872	0.0002838	0.002096	0.00002128	3.128	0.0001566	0.0012	0.0002035	-0.00008068
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.07353	0.0002439	0.002671	0.01123	0.00008771	7.793	0.00133	-0.00004009	0.007483	-0.1201
Use of net fresh water (FW)	Input	m3	0.1219	0.00001451	0.008748	0.0004814	0.00001839	29.75	0.0000791	0.0007534	0.0001405	-0.007211
Hazardous waste disposed (HWD)	Output	kg	0.06346	0.00001173	0.0004431	0.000273	0	0.1975	0.00006393	0.00001978	0.04366	-0.002696
Non hazardous waste dispose (NHWD)	Output	kg	1.444	0.006229	0.02997	0.1729	0.1722	23.7	0.03396	0.02671	0.2651	-0.1021
Radioactive waste disposed (RWD)	Output	kg	0.0003517	8.516E-7	0.000002453	0.00003842	0	0.002754	0.000004643	9.824E-7	4.82E-7	-0.00002613
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.009554	0	0.1602	0	0	0.263	0.00001438	-0.00009948
Materials for energy recovery (MER)	Output	kg	0	0	0.002061	0	0.0003148	0	0	0.1603	3.516E-7	-0.0000131
Exported electrical energy (EEE)	Output	MJ	0	0	0.003104	0	0.009848	0	0	0.2462	0.00002281	-0.00003209
Exported thermal energy (EET)	Output	MJ	0	0	0.04697	0	0.149	0	0	3.725	0.0003451	-0.0004855

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	160.7	0.1298	3.208	5.598	0.03896	307.6	0.7074	0.5307	0.1639	-8.22
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.003469	2.356E-7	0.00000112	0.000007556	6.779E-8	0.00168	0.000001284	3.713E-7	7.219E-8	-0.001003
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.09561	0.00002627	0.001893	0.006111	0.00001319	0.1761	0.0001432	0.000274	0.00006345	-0.04294
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.2241	0.00000342	0.00009023	0.0001406	0.2916	0.6229	0.00001864	0.0001008	0.000009049	-0.001647
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	13.36	0.008782	0.3624	0.3964	0.002785	22.53	0.04788	0.4271	0.02823	-0.6237
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	13.15	0.008789	0.3626	0.3966	0.2944	23.25	0.04791	0.4273	0.02832	-0.6259
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.02091	0.000003211	0.00005712	0.0001974	9.212E-7	0.09295	0.00001751	0.00009727	0.00007563	-0.0005756
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	13.44	0.008788	0.3424	0.3966	0.002786	23.2	0.04791	0.4273	0.02908	-0.6225
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001257	8.238E-8	0.000008047	0.00000253	2.287E-8	0.001621	4.491E-7	0.000001678	4.204E-7	-0.0002377
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.01465	0.000005172	0.000391	0.00147	0.000004362	0.01935	0.0000282	0.00007395	0.00003558	-0.002183
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.1666	0.00005784	0.004308	0.01637	0.00004723	0.2519	0.0003153	0.0007942	0.0001812	-0.03013
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.0544	0.00002166	0.001135	0.004424	0.00001358	0.06774	0.0001181	0.0002071	0.00007301	-0.008535
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000003608	1.912E-9	5.311E-9	8.736E-8	5.88E-10	0.000001545	1.041E-8	3.617E-9	1.342E-9	-0.001636
Water (user) deprivation potential (WDP)	m3 world eqv.	410.5	0.04231	0.5228	3.708	0.04938	5.362E+4	0.2307	4.586	1.263	11.42

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.4398	0.0005393	0.002775	0.02427	0.0001667	5.58	0	0.00294	0.002531	0.0005439	-0.03072
Potential incidence of disease due to PM emissions (PM)²	disease incidence	8.036E-7	5.66E-10	2.557E-8	1.401E-8	1.94E-10	0.000001262	0	3.095E-9	1.689E-9	1.169E-9	-9.185E-8
Potential Soil quality index (SQP)²	unitless	45.29	0.0889	0.6797	2.701	0.02614	154.9	0	0.4847	0.1215	0.4349	-8.579
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	5.703E-7	9.9E-11	4.445E-9	2.795E-9	6.5E-11	0.000001576	0	5.63E-10	4.052E-8	3.43E-10	-1.103E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.439E-8	0	1.03E-10	0	2E-12	6.689E-8	0	0	6.92E-10	4.1E-11	-1.399E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	855.5	0.1052	9.405	3.814	0.05196	1401	0	0.5735	1.634	64.07	-309.2