Process Data set: Soft Slim DTW (en)

Process Data set: Soft Slim DTW (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Soft Slim DTW
Technical purpose of product or process	Attractive exclusive downlight for indoor and outdoor use (gold only for indoor use), particularly well suited to basic lighting due to its very low unified glare rating. Well integrated LED chip and associated dimmable driver. Made of die-cast powder-coated aluminium, glass diffuser. 42° beam angle. Low recessed downlight with hole size Ø83mm. Our IsoSafe products can be mounted directly in insulation (IsoSafe). System Wattage: 8.0 W. Luminous flux: 550lm. Efficacy: 69 lm/W. Colour temperature: 2000-2800K. Colour rendering: Ra>95. MacAdams factor: SDCM: 3. Lifetime: L90/B10>50,000, . Light distribution: Direct. Control/Dimming: DALI-2. Luminiare class: Class II SELV. Housing: Aluminium. Optics: Tempered glass. Height: 52.0mm. Length: 90mm. Width: 90mm. EAN: 7021989032243 The EPD also covers the following products: EAN: 7021989032168 - SOFT SLIM WHITE DTW EAN: 7021989032267 - SOFT SLIM BLACK DTW EAN: 7021989032281 - SOFT SLIM BLACK DTW DALI EAN: 7021989032441 - SOFT SLIM GOLD DTW EAN: 7021989032489 - SOFT SLIM BLACK/GOLDL DTW EAN: 7021989032748 - SOFT SLIM WHITE/GOLD DTW Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Soft Slim DTW - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.034576345215 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-10-29 - 2030-10-29
Publication date	2025-10-29
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/soft-slim/903224/pdf/specification_903224.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/701652_Soft%20Slim/50/701652_Soft%20Slim.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-12549-12722_Soft-Slim-DTW.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-10-29T20:11:50
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	607ad86f-91b7-46c3-9016-b326543988f8
Date of last revision	2025-10-06T14:01:26.6537503Z
Data set version	00.02.001
Registration authority	EPD Norway
Registration number	NEPD-12549-12722
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	13.55	0.0008296	0.2066	0.03509	0.0002779	1412	0.004417	0.05312	0.03552	-1.226
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.4736	0	0	0	-0.4736	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	14.03	0.0008296	0.2066	0.03509	-0.4733	1412	0.004417	0.05312	0.03552	-1.226
Use of non renewable primary energy (PENRE)	Input	MJ	115.7	0.0733	2.06	3.089	0.01688	109.2	0.3903	0.4002	0.1273	-8.008
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	3.259	0	0	0	0	0	0	-4.173	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	119	0.0733	2.06	3.089	0.01688	109.2	0.3903	-3.773	0.1273	-8.008
Use of secondary material (SM)	Input	kg	0.298	0	0	0	0	0	0	0	0.0008224	0.004943
Use of renewable secondary fuels (RSF)	Input	MJ	0.2153	0.00001623	0.0001788	0.001156	0.000009218	1.109	0.00008639	0.0008962	0.000152	0.0008687
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.03275	0.0001378	0.001691	0.006195	0.000038	2.763	0.0007336	-0.00003851	0.007143	-0.02509
Use of net fresh water (FW)	Input	m3	0.1007	0.000008197	0.005419	0.0002656	0.000007966	10.55	0.00004364	0.000395	0.00009673	-0.00581
Hazardous waste disposed (HWD)	Output	kg	0.05416	0.000006624	0.0002821	0.0001506	0	0.07001	0.00003527	0.000019	0.04106	-0.00275
Non hazardous waste dispose (NHWD)	Output	kg	1.228	0.003519	0.01926	0.09537	0.0746	8.399	0.01873	0.02565	0.1322	-0.105
Radioactive waste disposed (RWD)	Output	kg	0.0002999	4.811E-7	0.000001615	0.0000212	0	0.0009763	0.000002561	9.438E-7	2.56E-7	-0.00002453
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.01335	0	0.06939	0	0	0.1852	0.00000454	-0.0001991
Materials for energy recovery (MER)	Output	kg	0	0	0.002189	0	0.0003147	0	0	0.05062	1.11E-7	-0.00002616
Exported electrical energy (EEE)	Output	MJ	0	0	0.002031	0	0.004267	0	0	0.07818	0.000007204	-0.00006614
Exported thermal energy (EET)	Output	MJ	0	0	0.03072	0	0.06455	0	0	1.183	0.000109	-0.001001

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	118.9	0.0733	2.06	3.089	0.01688	109	0.3903	0.4001	0.1272	-8.006
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.003167	1.331E-7	7.154E-7	0.000004168	2.937E-8	0.0005956	7.086E-7	3.116E-7	5.944E-8	-0.0009751
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.07797	0.00001484	0.001215	0.003372	0.000005715	0.06241	0.00007902	0.00018	0.00005077	-0.04278
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.0826	0.000001932	0.0003553	0.00007757	0.126	0.2208	0.00001029	0.00007461	0.000007837	-0.00167
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	10.01	0.004961	0.2304	0.2187	0.001207	7.987	0.02641	0.1604	0.01503	-0.6176
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	9.945	0.004965	0.2308	0.2188	0.1272	8.241	0.02643	0.1606	0.01511	-0.6194
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.01794	0.000001814	0.00003627	0.0001089	3.991E-7	0.03295	0.000009658	0.0000818	0.00007231	-0.0001763
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	10.07	0.004965	0.2179	0.2188	0.001207	8.224	0.02643	0.1606	0.01511	-0.6127
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001082	4.653E-8	0.000005144	0.000001396	9.908E-9	0.0005744	2.478E-7	0.00000124	3.879E-7	-0.0002384
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.01182	0.000002922	0.0002516	0.0008112	0.00000189	0.006859	0.00001556	0.00004036	0.00001826	-0.002147
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.132	0.00003267	0.00277	0.009033	0.00002046	0.08928	0.000174	0.0004433	0.0001334	-0.02977
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.04387	0.00001223	0.0007343	0.002441	0.000005882	0.02401	0.00006514	0.0001204	0.00005606	-0.008452
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000009974	1.083E-9	3.466E-9	4.82E-8	2.54E-10	5.477E-7	5.744E-9	2.696E-9	8.87E-10	-0.0005269
Water (user) deprivation potential (WDP)	m3 world eqv.	367.8	0.0239	0.3306	2.045	0.0214	425.1	0.1273	3.895	0.827	11.65

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.3797	0.0003047	0.001797	0.01339	0.00007223	1.978	0	0.001622	0.002005	0.0003622	-0.02868
Potential incidence of disease due to PM emissions (PM)²	disease incidence	5.496E-7	3.22E-10	1.638E-8	7.732E-9	8.5E-11	4.474E-7	0	1.708E-9	1.174E-9	9.22E-10	-8.606E-8
Potential Soil quality index (SQP)²	unitless	36.47	0.05022	0.4368	1.49	0.01133	54.91	0	0.2674	0.09889	0.317	-7.077
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	4.767E-7	5.6E-11	2.946E-9	1.542E-9	2.9E-11	5.585E-7	0	3.11E-10	3.822E-8	2.97E-10	-1.203E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.272E-8	0	6.5E-11	0	0	2.371E-8	0	0	6.5E-10	3.8E-11	-1.599E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	686.4	0.05942	6.024	2.104	0.02251	496.7	0	0.3164	0.942	48.13	-310.6