Process information
| Key Data Set Information | |
| Location | IT |
| Geographical representativeness description | Europe |
| Reference year | 2024 |
| Name |
|
| Use advice for data set | The approach is “cradle to grave” (A1–A3) with modules C1-C4 and module D and optional modules (A1-A3 + A4-A5 +C + D): • A1, A2, A3 (Product stage): extraction and processing of raw materials (A1), transportation up to the factory gate (A2), manufacturing of the finished product and packaging (A3). • A4-A5 (Construction process stage): transport of the finished product to final customers is assumed to be 1000km (A4). The installation phase (A5) includes the electricity consumption for the mixing. The packaging is collected and sent to treatment. • C1, C2, C3, C4 (End of Life stage): The demolition phase (C1) includes the electricity for demolition. With a collection rate of 100% as C&D waste, the transports are carried out by lorry over 100 km (C2). A recycling ratio (C3) of 70% is considered in accordance with the European Directive 2008/98/CE. The remaining 30% is landfilled (C4). • D (Resource recovery stage): contains credits from the incineration of a fraction of packaging waste (A5) and the credit from the recycling of the product in module C3. At the end of life, the product can be collected and recycled for use in substitution of virgin raw aggregates. |
| Technical purpose of product or process | Mapefloor CPU+ /MF is a four components, polyurethane-cement self-smoothing mortar, trowel-applied in 3 to 6 mm thickness, developed by MAPEI’s Research Laboratories, microbe-resistant and easy to sanitize for the protection of industrial floors, featuring high chemical and mechanical performance and thermal shock resistance up to +80°C, with operating temperatures range from -20°C to +70°C, depending on the thickness. Mixing ratio is: 2xA / 2xB / 1xC / 2xMapecolor CPU+. UN CPC code: 375 - Articles of concrete, cement and plaster. Mapefloor CPU+ /MF is available in: • Component A: 2 kg pack • Component B: 2.16 kg pack • Component C: 20 kg bag • Mapecolor CPU+: 0.23 kg pack For more information see the TDS (Technical Data Sheet) on Mapei website (www.mapei.com). The main components and ancillary materials of the products included in this EPD are the following: Table 1: Composition referred to 1 kg of product packaged in with packaging. Materials Percentage (%) by mass Post-consumer recycled material weight-% of product Biogenic Material, weight-% of product Biogenic Material, kgC/product Blend of polyols < 10% 0 5% 5,36E-02 Curing agents < 25% 0 0 0 Inorganic binders < 25% 0 0 0 Fillers < 70% 0 0 0 Additives < 8% 0 0 0 Water < 5% 0 0 0 Packaging Materials Weight-% (versus the product) Weight biogenic carbon, kg C/product HDPE 0,022 0 Wood 0,066 0,0284 Cardboard 0,01 0,004 The product does not contain a concentration higher than 0,1% (by unit weight) of either carcinogenic substances or substances of very high concern (SVHC) on the REACH Candidate List published by the European Chemicals Agency |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Table 10: Data quality Dataset & Geographical reference Database (source) Temporary reference A1; A3 Blend of polyols Sphera Database 2022 Curing agents Sphera Database 2022 Inorganic binders Sphera Database; EPD from suppliers 2023 Fillers Sphera Database 2022 Additives Sphera Database; Ecoinvent 3.10 2022 Water Sphera Database 2022 Residual electricity mix (IT) Ecoinvent 3.10 2022 Packaging components (EU) Sphera Database; Ecoinvent 3.10 2023 A2 Truck, Euro 5, 27t payload (GLO) Sphera Database 2023 Oceanic ship (27500 DWT – GLO) Sphera Database 2023 Diesel for transport (EU) Sphera Database 2020 Heavy Fuel Oil (EU) Sphera Database 2020 A4 Truck, Euro 5, 27t payload (GLO) Sphera Database 2023 Diesel for transport (EU) Sphera Database 2020 A5 Commercial waste in municipal waste incineration plant Sphera Database 2023 Inert matter on landfill Sphera Database 2023 Electricity grid mix (NO) Sphera Database 2020 C1-C4 Truck (EURO 6 - 9,3 ton payload – GLO) Sphera Database 2023 Electricity grid mix (EU) Sphera Database 2020 Diesel for transport (EU) Sphera Database 2020 Construction waste dumping (EU) Sphera Database 2023 Construction waste treatment (EU) Sphera Database 2023 All data included in table above refer to a period between 2020-2023; the most relevant ones are specific from supplier, while the others (i.e. transport and minor contribution dataset), come from European and global databases. All datasets are not more than 10 years old according to EN 15804 §6.3.8.2 “Data quality requirements”. The Quality level concerning datasets used in the EPD can be considered as ”very good” or ”good” according to Annex E of the EN 15804 (current version). Primary data concern the year 2023 and represent the whole annual production. For the allocation procedure and principles consider the following table (Table 7): Table 7: Allocation procedure and principles Module Allocation Principle A1 All data are referred to 1 kg of product A1: electricity is allocated to the specific production line A3 All data are referred to 1 kg of packaged product A3-wastes: all data are allocated to the whole production plant Criteria for the exclusion of inputs and outputs (cut-off rules) in the LCA, information modules and any additional information are intended to support an efficient calculation procedure. They are not applied in order to hide data. Cut-off criteria, where applied, are described in Table 6. Input flows are covered for the whole formula. Table 6: Cut-off criteria Process excluded from study Cut-off criteria Quantified contribution from process A3: production (auxiliary materials) Less than 10-5 kg/kg of finished product Sensitivity study demonstrates a relative contribution lower than 0,5% |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | 2024-11-28 - 2029-11-28 |
| Technological representativeness | |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-09-01T01:43:17 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 6016d8fe-7b3a-46a8-ac38-e6051a3fb35a |
| Date of last revision | 2025-06-29T19:05:34.5628859Z |
| Data set version | 00.04.000 |
| Registration authority | |
| Registration number | NEPD-47-46-MRA |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle