Process Data set: Rax Soft IP65 150 (en)

Process Data set: Rax Soft IP65 150 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Rax Soft IP65 150
Technical purpose of product or process	Rax Soft 150 IP65 is a high-performance downlight for outdoor use or other areas requiring high IP-resistance. It has excellent light control by a combination of optimized lens and reflector optics. Rax Soft 150 is installed easily with springs that fit ceiling panels with a thickness of 1–50 mm. System Wattage: 34.0 W. Luminous flux: 3560lm. Efficacy: 105 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 2. Lifetime: L90/B10>100,000, . Light distribution: Direct. Control/Dimming: On/Off. Luminiare class: Class II SELV. Housing: Aluminium. Optics: Glass. Height: 94.0mm. Diameter: 175,0mm. Cut-out: 150,0mm. EAN: 7021982127502 The EPD also covers the following products: EAN: 7021982127519 - RAX SOFT IP65 150 WHITE 4000 4000K EAN: 7021982127526 - RAX SOFT IP65 150 BLACK 4000 3000K EAN: 7021982127533 - RAX SOFT IP65 150 BLACK 4000 4000K Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Rax Soft IP65 150 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.237703092261 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-01-31 - 2030-01-31
Publication date	2025-01-31
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/rax-soft-150-ip65/212750/pdf/specification_212750.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/703265_Rax%20Soft%20150%20IP65/50/703265_Rax%20Soft%20IP65%20150.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8877-8527_Rax-Soft-IP65-150.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-02-10T15:46:15
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	60028592-5f66-48c6-9c9c-ad3d4b536778
Date of last revision	2025-01-27T13:52:24.8908553Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-8877-8527
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	32.33	0.002235	0.7916	0.156	0.001913	2587	0.01963	0.06923	0.04781	-3.061
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	3.042	0	0	0	-3.042	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	35.37	0.002235	0.7916	0.156	-3.04	2587	0.01963	0.06923	0.04781	-3.061
Use of non renewable primary energy (PENRE)	Input	MJ	231.2	0.1974	7.866	13.73	0.1162	2E+2	1.735	0.5798	0.2599	-7.395
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	12.61	0	0	0	0	0	0	-13.49	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	243.9	0.1974	7.866	13.73	0.1162	2E+2	1.735	-12.91	0.2599	-7.395
Use of secondary material (SM)	Input	kg	1.309	0	0	0	0	0	0	0	0.0007933	0.01194
Use of renewable secondary fuels (RSF)	Input	MJ	0.2277	0.00004371	0.0006959	0.005139	0.00006343	2.032	0.000384	0.001313	0.0004275	0.002963
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.1474	0.0003711	0.00655	0.02753	0.0002615	5.061	0.00326	-0.00003715	0.006998	-0.1258
Use of net fresh water (FW)	Input	m3	0.1823	0.00002208	0.02145	0.00118	0.00005482	19.32	0.000194	0.000986	0.0002675	-0.005534
Hazardous waste disposed (HWD)	Output	kg	0.1276	0.00001784	0.001087	0.0006694	0	0.1283	0.0001568	0.00001833	0.04898	-0.004139
Non hazardous waste dispose (NHWD)	Output	kg	2.794	0.009478	0.07348	0.4239	0.5133	15.39	0.08327	0.02475	0.6187	-0.09709
Radioactive waste disposed (RWD)	Output	kg	0.0005074	0.000001296	0.000006015	0.0000942	0	0.001789	0.00001138	9.104E-7	0.000001108	-0.00001988
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.02343	0	0.4775	0	0	0.8584	0.00002166	-0.0004673
Materials for energy recovery (MER)	Output	kg	0	0	0.005053	0	0.0003293	0	0	0.2416	5.297E-7	-0.00006153
Exported electrical energy (EEE)	Output	MJ	0	0	0.007612	0	0.02936	0	0	0.3711	0.00003436	-0.0001508
Exported thermal energy (EET)	Output	MJ	0	0	0.1152	0	0.4442	0	0	5.614	0.0005199	-0.002281

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	243.8	0.1974	7.866	13.73	0.1162	199.7	1.735	0.5796	0.2598	-7.394
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.005717	3.585E-7	0.000002747	0.00001853	2.021E-7	0.001091	0.000003149	3.82E-7	1.039E-7	-0.0009687
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1481	0.00003998	0.004642	0.01498	0.00003932	0.1143	0.0003512	0.0003245	0.00009547	-0.04544
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.7292	0.000005204	0.0002213	0.0003447	0.8707	0.4045	0.00004571	0.000253	0.000081	-0.001752
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	21.1	0.01336	0.8886	0.9721	0.008304	14.63	0.1174	0.6203	0.0405	-0.6003
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	20.41	0.01337	0.889	0.9725	0.879	15.1	0.1175	0.6207	0.04065	-0.6001
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.03773	0.000004886	0.0001401	0.0004841	0.000002746	0.06036	0.00004292	0.0000991	0.00007169	0.001934
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	21.27	0.01337	0.8396	0.9725	0.008307	15.07	0.1175	0.6206	0.04227	-0.6149
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001539	1.253E-7	0.00001973	0.000006203	6.818E-8	0.001052	0.000001101	0.000001842	4.641E-7	-0.0002573
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.02184	0.000007871	0.0009588	0.003605	0.00001301	0.01257	0.00006915	0.00009537	0.00005721	-0.00234
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.2497	0.00008801	0.01056	0.04014	0.0001408	0.1636	0.0007732	0.001015	0.0003146	-0.03254
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.07899	0.00003296	0.002782	0.01085	0.00004047	0.04399	0.0002895	0.0002603	0.0001116	-0.009141
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000004577	2.903E-9	1.303E-8	2.142E-7	1.753E-9	0.000001003	2.553E-8	4.014E-9	2.606E-9	-0.002559
Water (user) deprivation potential (WDP)	m3 world eqv.	740.9	0.06438	1.282	9.091	0.1472	3.482E+4	0.5656	4.67	3.283	103.8

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.6098	0.0008206	0.006804	0.05951	0.0004971	3.624	0	0.007209	0.00268	0.001153	-0.0231
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001345	8.67E-10	6.269E-8	3.436E-8	5.8E-10	8.197E-7	0	7.59E-9	1.933E-9	1.746E-9	-1.05E-7
Potential Soil quality index (SQP)²	unitless	68.37	0.1353	1.667	6.623	0.07794	100.6	0	1.188	0.127	0.6436	-10.38
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	8.106E-7	1.55E-10	1.09E-8	6.854E-9	1.94E-10	0.000001023	0	1.38E-9	3.817E-8	4.52E-10	-1.544E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.938E-8	0	2.49E-10	0	5E-12	4.343E-8	0	0	6.57E-10	4.4E-11	-1.916E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1153	0.1601	23.06	9.352	0.1549	9.1E+2	0	1.406	2.06	198.4	-340.6