Process Data set: Place (en) - EPD Global Digi Node

Process Data set: Place (en) en

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Nordic + Northwestern Europe.
Reference year	2024
Name	Place
Technical purpose of product or process	Mast or wall-mounted (600 mm diameter) IP66 LED luminaire. Base and top made of die-cast aluminium, inner diffuser made of PMMA and outer optics made of polycarbonate (PC). Grey or black base and top. Complete with LED driver for operation of LED light sources mounted to component rail with internal connector/lampholder and pre-mounted with five-metre connection cable. Prepared for mounting on 60 mm or designer mast. Safety class II. Wattage: 28W. Luminous flux: 2510lm. Efficacy: 90 lm/W. Colour temperature: 4000K. Colour rendering: Ra>80. Housing: Die-cast aluminum. Colour: Grey (structure 2150 sablé). Height: 291 mm. Diameter: 600 mm. EAN: 5703821168090. The EPD also covers the following products: EAN: 5703821168076 - Place Grey 2370lm 3000K Ra>80 DYNADIM Pr. 2 Sweden EAN: 5703821172097 - Place Black 2370lm 3000K Ra>80 DYNADIM Pr. 2 Sweden EAN: 5703821172110 - Place Black 2510lm 4000K Ra>80 DYNADIM Pr. 2 Sweden EAN: 5703821172950 - Place Grey 2370lm 3000K Ra>80 Lumistep LS8 EAN: 5703821172967 - Place Grey 2510lm 4000K Ra>80 Lumistep LS8
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Place - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0925925926 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-11-26" - "2029-11-26"
Publication date	2024-11-26
Technological representativeness
Technology description including background system	Link to the CE Declaration on our website: https://www.sg-as.com/storage/data/130987_Place/50/130987_Place.pdf Link to product data on our website: https://www.sg-as.com/products/place-wall-arm/8246088228

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8247-7917_Place.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-11-27T19:05:20
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	5d9e2789-7aec-4384-8399-d5feb300c564
Date of last revision	2024-04-15T13:29:21.5563801Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-8247-7917
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	166.4	0.09599	48.58	0.2461	0.001356	1.246E+4	0.08204	0.6652	0.3484	-57.14
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	1.64	0	0	0	-1.64	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	168	0.09599	48.58	0.2461	-1.639	1.246E+4	0.08204	0.6652	0.3484	-57.14
Use of non renewable primary energy (PENRE)	Input	MJ	1821	10.58	49.35	17.19	0.06947	963.5	5.731	4.101	1.554	-125.7
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	80.71	0	0	0	-3.147	0	0	-78.23	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	1.87E+3	10.58	62.56	17.19	-3.078	963.5	5.731	-74.13	1.554	-137.1
Use of secondary material (SM)	Input	kg	2.315	0	0.002021	0	0.00005745	0	0	0.001185	0.0133	1.229
Use of renewable secondary fuels (RSF)	Input	MJ	1.039	0.00288	1.225	0.008805	0.00004075	9.785	0.002935	0.01293	0.002192	-0.006528
Use of non renewable secondary fuels (NRSF)	Input	MJ	-1.488	0.02269	1.123	0.03148	0.0001438	24.38	0.01049	-0.004848	0.06299	-0.7575
Use of net fresh water (FW)	Input	m3	1.329	0.0007293	0.1325	0.001839	0.00003415	93.07	0.0006129	0.00701	0.001465	-0.2467
Hazardous waste disposed (HWD)	Output	kg	0.7896	0.0004795	0.03501	0.0008867	0.0002093	0.6177	0.0002956	0.001088	0.373	0.02686
Non hazardous waste dispose (NHWD)	Output	kg	19.91	0.1755	0.3573	0.8361	0.03904	74.11	0.2787	0.1234	2.609	-2.86
Radioactive waste disposed (RWD)	Output	kg	0.004667	0.00007311	0.0001438	0.0001171	4.621E-7	0.008615	0.00003904	0.00001928	0.000006603	-0.000492
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.05547	0	3.369	0	0.2239	0	0	2.672	0.007111	1.046
Materials for energy recovery (MER)	Output	kg	0.00148	0	0.00001395	0	4.412E-7	0	0	0.0001386	0.0001572	-0.0005647
Exported electrical energy (EEE)	Output	MJ	0.01297	0	0.1154	0	0.01191	0	0	2.107	0.001575	0.05931
Exported thermal energy (EET)	Output	MJ	0.1963	0	1.746	0	0.1801	0	0	31.88	0.02383	0.8974

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	1.87E+3	10.58	49.34	17.19	0.06946	962	5.731	4.099	1.553	-125.7
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.01708	0.00001021	0.00002856	0.00003141	1.1E-7	0.005256	0.00001047	0.000002923	6.652E-7	-0.001783
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	1.098	0.01923	0.01402	0.003268	0.00002256	0.5507	0.001089	0.002056	0.0006006	-0.1765
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.1371	0.0002467	0.1939	0.0004706	0.3395	1.948	0.0001569	0.08498	0.04004	-0.04308
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	153.2	0.7885	3.736	1.137	0.009104	70.48	0.379	3.825	0.2608	-9.966
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	153.7	0.7887	3.941	1.138	0.3486	72.72	0.3793	3.911	0.3015	-10.18
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.2917	0.0004727	0.01126	0.0004047	0.00000152	0.2907	0.0001349	0.0006192	0.0006257	-0.1661
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	152.3	0.7886	4.763	1.138	0	72.57	0.3793	3.892	0.0426	-9.711
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.01879	0.000004094	0.0002582	0.000009085	3.864E-8	0.005069	0.000003028	0.00001841	0.000003983	-0.001079
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.1556	0.004696	0.002758	0.0006466	0.00001169	0.06053	0.0002155	0.0005984	0.0003842	-0.01324
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	1.758	0.05228	0.03631	0.007233	0.00008079	0.7878	0.002411	0.006404	0.001763	-0.1646
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.535	0.01372	0.008361	0.002771	0.0000243	0.2119	0.0009235	0.001653	0.0006892	-0.05069
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000009065	1.705E-7	2.034E-7	2.576E-7	1.035E-9	0.000004833	8.586E-8	7.233E-8	1.339E-8	-0.01346
Water (user) deprivation potential (WDP)	m3 world eqv.	6.34E+3	4.613	591.3	16.63	0.1429	1.677E+5	5.543	21.7	15.55	-4805

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	5.848	0.04563	0.2078	0.07515	0.000303	17.45	0	0.02505	0.01843	0.005737	-0.5298
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000009071	1.32E-8	1.686E-7	6.961E-8	3.56E-10	0.000003948	0	2.32E-8	1.881E-8	1.057E-8	-9.197E-7
Potential Soil quality index (SQP)²	unitless	371.3	3.259	83.19	12.03	0.07261	484.5	0	4.009	1.192	4.062	-34.85
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000006142	2.637E-9	6.095E-8	1.392E-8	9.8E-11	0.000004928	0	4.641E-9	8.816E-8	3.507E-9	-0.000001014
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.678E-7	0	1.684E-9	0	3E-12	2.092E-7	0	0	1.967E-9	3.64E-10	-3.131E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	7599	6.674	84.4	12.75	0.08345	4383	0	4.248	19.57	707.1	-1109