Process Data set: Facet II 1700 (en)

Process Data set: Facet II 1700 (en) en

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2024
Name	Facet II 1700
Technical purpose of product or process	Facet II is a slim, minimalistic luminaire with white powdercoating. With the direct/indirect light and glare-free optics in PMMA. It is perfect for classrooms or open offices where light comfort is very important. Wattage: 52W. Luminous flux: 8450lm. Efficacy: 163 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B10>100,000. L94>50.000. Light distribution: Direct/Indirect 58/42%. UGR: UGR<19. Control/Dimming type: DALI. Luminaire class: Class I. Contains light source of energy class: D. Housing: Sheet steel. Length: 1756 mm. Width: 112 mm. Height: 80 mm. EAN: 5703821205276. The EPD also covers the following products: EAN: 5703821171960 - Facet II 1700 White 6760lm 3000K Ra>80 DALI EAN: 5703821172035 - Facet II 1700 White 7120lm 4000K Ra>80 DALI EAN: 5703821172011 - Facet II 1700 White 6760lm 3000K Ra>80 On/Off EAN: 5703821172028 - Facet II 1700 White 7120lm 4000K Ra>80 On/Off Please note that the above has been calculated with the Norwegian energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Facet II 1700 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.212500000017 kg
Time representativeness
Data set valid until	2029
Time representativeness description	2024-11-20 - 2029-11-20
Publication date	2024-11-20
Technological representativeness
Technology description including background system	Link to the CE Declaration on our website: https://www.sg-as.com/storage/data/130264_Facet%20II/50/130264_Facet%20II.pdf Link to product data on our website: https://www.sg-as.com/products/facet-ii/8241000572

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8193-7864_Facet-II-1700.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-02-18T16:19:55
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	504c9497-a54c-4950-bde3-4981aac20b1f
Date of last revision	2024-11-18T17:07:49.3293791Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-8193-7864
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	72.57	0.02888	40.84	0.4138	0.001929	7538	0.06896	0.5089	0.1808	-7.572
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	3.764	0	0	0	-3.764	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	76.33	0.02888	40.84	0.4138	-3.762	7538	0.06896	0.5089	0.1808	-7.572
Use of non renewable primary energy (PENRE)	Input	MJ	719.4	2.127	41.49	28.91	0.1126	582.9	4.818	3.073	0.8393	-23.89
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	28.72	0	0	0	-1.13	0	0	-28.9	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	748.1	2.127	41.49	28.91	-1.017	582.9	4.818	-25.82	0.8393	-23.89
Use of secondary material (SM)	Input	kg	3.356	0	0	0	0	0	0	0	0.003197	0.04258
Use of renewable secondary fuels (RSF)	Input	MJ	1.497	0.001018	1.03	0.0148	0.00006247	5.92	0.002467	0.01035	0.001452	0.02921
Use of non renewable secondary fuels (NRSF)	Input	MJ	7.878	0.00399	0.9442	0.05293	0.0002489	14.75	0.008822	-0.0000661	0.02958	0.4876
Use of net fresh water (FW)	Input	m3	0.6265	0.0002161	0.1113	0.003091	0.00005361	56.3	0.0005152	0.003661	0.0008622	-0.02429
Hazardous waste disposed (HWD)	Output	kg	0.3377	0.0001078	0.0294	0.001491	0	0.3737	0.0002485	0.00003052	0.1847	-0.008706
Non hazardous waste dispose (NHWD)	Output	kg	10.75	0.09387	2.889	1.406	0.4856	44.84	0.2343	0.2464	1.425	-0.5876
Radioactive waste disposed (RWD)	Output	kg	0.002233	0.00001452	0.0001171	0.0001969	0	0.005212	0.00003282	0.000001587	0.000002852	-0.0000485
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	2.83	0	0.4405	0	0	3.743	0.00003622	-0.001667
Materials for energy recovery (MER)	Output	kg	0	0	0.1461	0	0.03209	0	0	0.6085	8.859E-7	-0.0002194
Exported electrical energy (EEE)	Output	MJ	0	0	0.097	0	0.02626	0	0	0.6207	0.00005747	-0.0005377
Exported thermal energy (EET)	Output	MJ	0	0	1.468	0	0.3972	0	0	9.39	0.0008695	-0.008134

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	741.7	2.127	41.48	28.91	0.1126	582	4.818	3.072	0.8389	-23.89
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.006006	0.000003629	0.00002401	0.00005281	1.919E-7	0.003179	0.000008801	0.000002281	3.471E-7	-0.001549
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.4335	0.0008917	0.01178	0.005494	0.00003776	0.3331	0.0009157	0.001286	0.0003202	-0.09212
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.2828	0.00005702	0.163	0.0007913	0.7792	1.179	0.0001319	0.001379	0.0000385	-0.004891
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	57.13	0.1432	3.141	1.912	0.009532	42.63	0.3186	1.506	0.1085	-2.087
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	56.93	0.1433	3.313	1.913	0.7887	43.99	0.3189	1.508	0.1088	-2.098
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.08374	0.00005641	0.009467	0.0006804	0.000002617	0.1759	0.0001134	0.0003917	0.0002869	-0.005797
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	57.67	0.1433	4.133	1.913	0.009535	43.9	0.3189	1.508	0.1127	-2.375
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.007598	0.000001082	0.000217	0.00001527	6.53E-8	0.003066	0.000002546	0.0000148	0.000001865	-0.000575
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.06089	0.0002017	0.002318	0.001087	0.00001401	0.03662	0.0001812	0.0003103	0.0001363	-0.005196
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.6832	0.002249	0.03052	0.01216	0.0001352	0.4766	0.002027	0.003398	0.0009802	-0.07004
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.2274	0.000683	0.007028	0.004658	0.00003925	0.1282	0.0007764	0.0009094	0.0003533	-0.02131
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000004331	3.221E-8	1.709E-7	4.33E-7	1.694E-9	0.000002924	7.217E-8	5.936E-8	7.563E-9	-0.003965
Water (user) deprivation potential (WDP)	m3 world eqv.	2681	1.899	497.1	27.96	0.1624	1.015E+5	4.66	15.77	11.36	-54.29

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	2.75	0.009281	0.1747	0.1263	0.0004837	10.56	0	0.02106	0.01416	0.003547	-0.0555
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000003211	7.778E-9	1.417E-7	1.17E-7	5.66E-10	0.000002388	0	1.951E-8	1.403E-8	5.413E-9	-2.722E-7
Potential Soil quality index (SQP)²	unitless	233.3	1.371	69.93	20.22	0.08485	293.1	0	3.37	0.9799	2.012	-17.9
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000003562	1.555E-9	5.124E-8	2.341E-8	1.82E-10	0.000002981	0	3.901E-9	6.688E-8	1.99E-9	-3.914E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.466E-7	0	1.414E-9	0	4E-12	1.266E-7	0	0	1.539E-9	1.81E-10	-9.582E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	3419	1.544	70.95	21.43	0.1468	2652	0	3.571	12.96	600.1	-728.2