Process Data set: C35/45 Aggressiv Sætmål (en)

Process Data set: C35/45 Aggressiv Sætmål (en) da

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Danmark
Reference year	2025
Name	C35/45 Aggressiv Sætmål
Technical purpose of product or process	Denne EPD repræsentere 1 m³ Aggressiv 35 MPa færdigbeton stenstørrelse Dmax 16 mm. Det deklarerede produkt er et gennemsnit af færdigblandet sætmålsbeton produceret på de forskellige produktionssteder under BG Beton Danmark. Denne beton er for konstruktioner uden konstruktivt beskyttet overflade. F. eks. udvendige bjælker, kanaler og gruber i grundvand, udvendige trapper eller kælderydervægge delvis over terræn. Resultatet i denne EPD er givet for gennemsnitsværdien af de inkluderede færdigbetonrecepter. Variationen i den samlede miljøpåvirkning ligger over +\-10% af gennemsnittet på grund af forskel i cementmængde. På trods af dette sikrer det vægtede gennemsnit et repræsentativt miljøaftryk for det deklarerede produkt. Se under tillægsinformation for spændvidde i hovedindikatorer for miljøpåvirkning. Ud over cementmængden kan de observerede variationer i hovedtræk tilskrives tre faktorer: den anvendte cementtype, variationen i transportafstand for tilslagsmaterialer (herunder sand og sten), og diversiteten i energiforbrug. Færdigblandet Sætmålsbeton
General comment on data set	Datakvalitet: Specifikke data for produktsammensætningen er fremskaffet af producenten. De repræsenterer productionen af det deklarerede produkt og blev indsamlet til udarbejdelsen af denne EPDen i det angivne studieår. Baggrundsdata er baseret på EPDer iht. til EN 15804, og forskellige LCA databaser. Datakvaliteten for råmaterialerne i A1 er præsenteret i undernævnte tabel. Det gennemsnitlige beton produkt, der er taget i betragtning i undersøgelsen, repræsenterer et vægtet gennemsnit (baseret på solgte mængder) af samme styrkeklasse produceret på de forskjellige produksjonsstedene til BG Beton. Det gjelder afdelingene Avedøre, Herning, Horsens, Odense, Randers, Rødbyhavn og Viborg. Sammensætningen af inputmateriale er gennemsnittet af produktionsvolumenerne på hvert sted. Allokering: Allokering er foretaget iht. bestemmelser i EN 15804. Indgående energi og vand, samt produktion af affald i egen produktion er allokeret lige mellem alle produkterne gennem masseallokering. Miljøpåvirkninger og ressourceforbrug for primærproduktion af recirkulerede materialer er allokeret til det oprindelige produktsystem. Cut-off kriterier: Alle vigtige råmaterialer og alle vigtige energiforbrug er inkluderet. Produktionsprocesser for råmaterialer og energistrømme som indgår med meget små mængder (mindre end 1%) kan udelades iht. EN 15804. Disse cutoff kriterier gælder ikke for farlige materialer og stoffer.
Copyright	Yes
Owner of data set	BG Beton A/S
Quantitative reference
Reference flow(s)	C35/45 Aggressiv Sætmål - 1.0 * 1.0 m3 (Volume)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-12-02 - 2030-12-02
Publication date	2025-12-02
Technological representativeness
Technology description including background system	Betonen er produceret iht. DS/EN 206. Eksponeringsklasse XD1, XS1, XS2, XF2, XF3, XA2. Gennemsnitlig densitet er 2276 kg/m3.

Modelling and validation

Subtype

average dataset

LCA methodology report

EN 16757:2022 for Concrete and concrete elements

Data sources, treatment and representativeness

Documentation of data quality management

EN 16757:2022 for Concrete and concrete elements

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-14293-14696_C35-45-Aggressiv-S--tm--l.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Alexander Borg

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2026-07-31T19:52:16
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	4fd2a84d-f81a-48ef-b91e-9e3b6063b547
Date of last revision	2026-01-14T15:49:26.0063516Z
Data set version	00.02.002
Registration authority	EPD Norway
Registration number	NEPD-14293-14696
Owner of data set	BG Beton A/S
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	652.8	5.711	15.07	2.877	0.8214	2.877	16.69	0.09881	-23.81
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.6106	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	653.4	5.711	15.07	2.877	0.8214	2.877	16.69	0.09881	-23.81
Use of non renewable primary energy (PENRE)	Input	MJ	1432	392.9	57.67	176.7	130.4	176.7	72.51	10.46	-76.41
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	30.95	0	0	0	0	0	0	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	1463	392.9	57.67	176.7	130.4	176.7	72.51	10.46	-76.41
Use of secondary material (SM)	Input	kg	28.41	0	0	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	109	0.001678	0.007092	0.000964	0	0.000964	0	0	-0.0006319
Use of non renewable secondary fuels (NRSF)	Input	MJ	292.4	0	0.0002877	0	0	0	0	0	0
Use of net fresh water (FW)	Input	m3	0.9025	0.0454	0.2398	0.02608	0.009199	0.02608	0.04103	0.01086	-3.148
Hazardous waste disposed (HWD)	Output	kg	0.4566	0.5866	0.1072	0.2557	0.1154	0.2557	0.1013	0.008383	-0.3211
Non hazardous waste dispose (NHWD)	Output	kg	9.21	10.79	4.545	5.118	0.8553	5.118	0.7485	0.1134	-5.265
Radioactive waste disposed (RWD)	Output	kg	0.002981	0.08278	0.00006881	0.00005268	0	0.00005268	0	0	-0.0002454
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0	0	0	0	2207	0	0
Materials for energy recovery (MER)	Output	kg	0	0	0	0	0	0	0	0	0
Exported electrical energy (EEE)	Output	MJ	0	0	0.00002831	0	0	0	0	0	0
Exported thermal energy (EET)	Output	MJ	0	0	0.00003378	0	0	0	0	0	0

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	1495	392.9	57.66	176.7	130.4	176.7	72.5	10.46	-76.41
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0001224	0.00007347	0.000008924	0.00003368	0.000003573	0.00003368	0.00003795	6.253E-7	-0.00004625
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.6399	0.3269	0.03464	0.02777	0.08946	0.02777	0.02231	0.002992	-0.04063
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.5259	0.009485	0.03819	0.007637	0.002027	0.007637	0.08827	0.0002091	-0.1395
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	286.9	29.38	4.246	11.77	10.01	11.77	3.509	0.4272	-4.925
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	287.5	29.4	4.288	11.78	10.01	11.78	3.606	0.4277	-5.067
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.05787	0.0137	0.002971	0.004582	0.001024	0.004582	0.008175	0.0002428	-0.002261
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	287	29.4	4.253	11.78	10.01	11.78	3.522	0.4276	-4.937
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.004435	0.001648	0.0004884	0.0008222	0.0003227	0.0008222	0.002682	0.00003741	-0.000658
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.04171	0.07503	0.01517	0.007286	0.04164	0.007286	0.005463	0.001148	-0.01549
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	2.35	0.8323	0.1668	0.0788	0.4559	0.0788	0.05456	0.01254	-0.1797
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.63	0.2673	0.04989	0.04828	0.1364	0.04828	0.01686	0.004528	-0.05154
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000006589	3.86E-7	8.648E-8	2.276E-7	1.479E-7	2.276E-7	6.181E-8	1.188E-8	-7.064E-8
Water (user) deprivation potential (WDP)	m3 world eqv.	38.52	1.711	5.859	0.9049	0.2785	0.9049	0.6962	0.4561	-3.414

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	2.67	0.4058	0.2521	0.213	0.05553	0.213	1.743	0.006264	-1.077
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000007687	0.000001353	9.125E-7	0.000001138	0.00001948	0.000001138	2.406E-7	6.882E-8	-0.000001051
Potential Soil quality index (SQP)²	unitless	952.2	167	24.58	177.9	8.65	177.9	45.89	20.56	-146.7
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000006621	1.924E-7	2.011E-8	1.138E-7	1.593E-8	1.138E-7	4.415E-8	1.707E-9	-4.856E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	4.881E-7	0	6.29E-10	0	0	0	0	6.8E-11	-2.207E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	46.62	60.69	8.376	20.82	7.068	20.82	9.834	0.7566	-12.51