Process Data set: Jackofoam XPS Bewi Finland Oy (en)

Process Data set: Jackofoam XPS Bewi Finland Oy (en) en

Process information

Key Data Set Information
Location	FI
Geographical representativeness description	Finland
Reference year	2024
Name	Jackofoam XPS Bewi Finland Oy
Use advice for data set	All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Technical purpose of product or process	Extruded polystyrene (XPS) is a common material used for thermal insulation of buildings and constructions. It's a polymer foam, consisting of airfilled polystyrene cells. As most of the material is air, XPS provides good insulating properties at a low weight. Other characteristics of the material include low moisture absorption, long service life and high compressive strength. This LCA is based on Jackofoam 300 and can be used for all Jackofoam products. Please use the conversion table for other sizes than the declared unit. XPS is manufactured through an extruder where polystyrene granulates are mixed with additives and foaming agents to produce the foam mass. The foam mass is pressed out flat to a board through a nozzle in desire thickness and cut into correct dimensions. Some of the remaining blowing agents are aired out before the product leaves the factory gate. The number of the product is the pressure class; here 300 which means a short dermation of 10% when the load of the product is 300 kN/m2.
Classification	Class name : Hierarchy level EPDNorge: Construction / Insulation
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804+A2. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	BEWI ASA, Insulation and Construction
Quantitative reference
Reference flow(s)	Jackofoam XPS Bewi Finland Oy - 1.0 * 1.0 kg (Mass)
Biogenic carbon content	Carbon content (biogenic): 1.0 kg Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-10-21" - "2029-10-21"
Publication date	2024-10-21
Technological representativeness
Technology description including background system	CE marking: XPS insulation boards are CE certified according to SFS-EN 13164 Typical size: 600 mm x 1200 mm, 600 x 2400 mm, 585x2385 mm (EN 822) Typical thickness: 30 mm - 100 mm (EN 823) Lambda: 0,034 - 0,036 W/mK (EN 13164) Moisture absorption: <0,7 vol% (EN 12087)

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 012:2022 Part B for Thermal insulation products

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 012:2022 Part B for Thermal insulation products

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-7889-7559

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-10-22T17:15:45
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	4ef35c32-63a7-4c87-9af4-a1affd4a51e6
Date of last revision	2024-10-18T07:47:55.754178Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-7889-7559
Owner of data set	BEWI ASA, Insulation and Construction
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	0.6066	0.05511	3.912	0.007071	0.0001023	0.00005443	0.005133	0.0004227	-13.33
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	0.6066	0.05511	3.912	0.007071	0.0001023	0.00005443	0.005133	0.0004227	-13.33
Use of non renewable primary energy (PENRE)	Input	MJ	33.26	4.408	13.03	0.494	0.00405	0.003197	0.1784	0.011	-5.606
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	27.05	0	0	0	0	0	0	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	60.32	4.408	13.03	0.494	0.00405	0.003197	0.1784	0.011	-5.606
Use of secondary material (SM)	Input	kg	0.2602	0	0	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.006823	0.001924	0.04565	0.000253	0.000002683	0.000001964	0.0001431	0.000009083	-0.001344
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.001924	0.006418	0.146	0.0009045	0.000007022	0.000007135	0	0.0003131	-0.8819
Use of net fresh water (FW)	Input	m3	0.03795	0.0004962	0.01273	0.00005283	0.000002141	3.809E-7	0.0005045	0.00001313	-0.008484
Hazardous waste disposed (HWD)	Output	kg	0.002641	0.0002399	0.0006949	0.00002547	0	1.77E-7	0	0.002354	-0.00009258
Non hazardous waste dispose (NHWD)	Output	kg	0.07838	0.3739	0.03555	0.02402	0.0124	0.0001262	0	0.04417	-0.04909
Radioactive waste disposed (RWD)	Output	kg	0.00000905	0.00003011	0.0001415	0.000003365	0	2.157E-8	0	7.782E-9	-0.00001155
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.02464	0	0	0	0.006329	0	0.04	0	0
Materials for energy recovery (MER)	Output	kg	0.005454	0	0	0	6.2E-7	0	0.913	0	0
Exported electrical energy (EEE)	Output	MJ	0.008398	0	0	0	9.526E-7	0	1.609	0	0
Exported thermal energy (EET)	Output	MJ	0.127	0	0	0	0.00001441	0	24.34	0	0

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	60.3	4.408	12.58	0.4939	0.00405	0.003197	0.1784	0.011	-5.606
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.000002847	0.000004849	0.000003346	9.024E-7	5.228E-9	7.727E-9	8.991E-8	3.971E-9	-0.000001027
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.01073	0.001049	0.001824	0.00009389	0.000001211	6.153E-7	0.0003461	0.000003636	-0.001835
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.01019	0.0001159	0.002239	0.00001352	1.356E-7	9.905E-8	0.00002007	4.87E-7	-0.001083
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	2.863	0.2729	0.4144	0.03267	0.0009821	0.0002141	2.911	0.0004946	-0.3095
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	2.874	0.2731	0.4212	0.03269	0.0009824	0.0002143	2.911	0.0004952	-0.3164
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.000632	0.00008527	0.004555	0.00001163	7.532E-8	9.261E-8	0.00000318	1.084E-7	-0.005785
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	2.87	0.2731	0.5531	0.03269	0.0009822	0.0002143	2.911	0.0005001	-0.3138
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.00001282	0.000002148	0.00001825	2.61E-7	2.021E-9	1.963E-9	2.06E-7	5.914E-9	-0.00001698
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.001717	0.0002352	0.0002884	0.00001858	0.000001108	1.165E-7	0.0001665	0.000001322	-0.0005249
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.01868	0.002621	0.003625	0.0002078	0.000004339	0.000001308	0.001782	0.00001464	-0.005654
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.007601	0.0009582	0.007378	0.0000796	0.000001427	4.995E-7	0.0004273	0.000004172	-0.001779
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	2.861E-8	6.55E-8	5.727E-8	7.4E-9	5.9E-11	4.7E-11	2.088E-9	1.49E-10	-0.01231
Water (user) deprivation potential (WDP)	m3 world eqv.	-1.131	3.352	698.7	0.4778	0.01432	0.003824	0.3956	0.07324	-8.446

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.2733	0.01926	0.3095	0.002159	0.0000183	0	0.00001398	0.0002982	0.00005043	-0.01319
Potential incidence of disease due to PM emissions (PM)²	disease incidence	9.026E-8	2.454E-8	8.173E-9	2E-9	2.2E-11	0	1.2E-11	1.458E-9	7.3E-11	-8.867E-8
Potential Soil quality index (SQP)²	unitless	1.157	4.943	7.664	0.3455	0.00707	0	0.001901	0.02124	0.04093	-16.1
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	8.924E-9	3.123E-9	5.72E-9	4E-10	4E-12	0	3E-12	4.836E-9	8E-12	-1.225E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	4.76E-10	0	2.21E-10	0	0	0	0	1.22E-10	0	-2.44E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	5.035	3.211	8.853	0.3662	0.003865	0	0.002493	0.4302	0.007667	-13.16