Process Data set: Sense IP65 Eco (en)

Process Data set: Sense IP65 Eco (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Sense IP65 Eco
Technical purpose of product or process	Sense IP65 Eco is a waterproof luminaire with opal prismatic front, delivered complete with driver. Ideal for industrial kitchens, hospitals, laboratories, and production facilities. Very low glare, UGR<19, and long lifetime.Sense IP65 Eco is easy to install in T-rail ceilings and have a smooth surface in PMMA, which makes it easy to clean. The LED panel is IP65 from the front and the back.The driver is IP20, and with 2+1m cable from the panel, the driver can be placed away from where water could come when cleaning. System Wattage: 34.0 W. Luminous flux: 4060lm. Efficacy: 119 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000, L90>50,000. Light distribution: Direct. Control/Dimming: Trailing edge dimming. Luminiare class: Class II. Housing: Aluminium. Optics: Acrylic (PMMA). Height: 53.0mm. Length: 597.0 mm. Width: 597.0 mm. EAN: 7021982123900 The EPD also covers the folowing products: EPD: 7021982123917 - SENSE IP65 ECO 4000K EPD: 7021982124143 - SENSE IP65 ECO 4000K DALI EPD: 7021982124686 - SENSE IP65 ECO 3000K DALI Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Sense IP65 Eco - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.507168089142 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-03-03 - 2030-03-03
Publication date	2025-03-03
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/sense-ip65-eco/212390/pdf/specification_212390.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/702895_Sense%20IP65%20Eco/50/702895_Sense%20IP65%20Eco.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-9258-8842_Sense-IP65-Eco.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-03-20T10:20:48
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	4cf453f4-2aa0-4764-b8bb-6563c3c185e2
Date of last revision	2025-02-26T19:48:00.8757098Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-9258-8842
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	60.86	0.01582	0.6988	0.1871	0.004039	1.605E+4	0.02242	0.1123	0.1596	-4.44
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	11.8	0	0	0	-11.8	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	72.66	0.01582	0.6988	0.1871	-11.79	1.605E+4	0.02242	0.1123	0.1596	-4.44
Use of non renewable primary energy (PENRE)	Input	MJ	498.3	1.398	8.59	16.47	0.2453	1241	1.981	0.5371	0.525	-14.35
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	13.57	0	0	0	0	0	0	-14.46	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	511.8	1.398	8.59	16.47	0.2453	1241	1.981	-13.92	0.525	-14.35
Use of secondary material (SM)	Input	kg	1.604	0	0	0	0	0	0	0	0.003933	0.004027
Use of renewable secondary fuels (RSF)	Input	MJ	3.041	0.0003094	0.0003868	0.006045	0.0001339	12.6	0.0004386	0.001069	0.000514	0.01686
Use of non renewable secondary fuels (NRSF)	Input	MJ	1.358	0.002627	0.004217	0.03294	0.0005522	31.4	0.003724	-0.00004914	0.03411	0.3292
Use of net fresh water (FW)	Input	m3	0.4377	0.0001563	0.005356	0.001437	0.0001158	119.9	0.0002215	0.001076	0.0003543	-0.01395
Hazardous waste disposed (HWD)	Output	kg	0.1915	0.0001263	0.0007158	0.0008362	0	0.7957	0.000179	0.00002846	0.1884	-0.006273
Non hazardous waste dispose (NHWD)	Output	kg	5.596	0.0671	0.08935	0.5222	1.084	95.46	0.0951	0.04322	0.3585	-0.3754
Radioactive waste disposed (RWD)	Output	kg	0.001338	0.000009173	0.00001669	0.0001128	0	0.0111	0.000013	0.000001711	6.676E-7	-0.00003166
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.04414	0	1.008	0	0	0.6269	0.00001759	-0.0001576
Materials for energy recovery (MER)	Output	kg	0	0	0.00416	0	0.04642	0	0	0.1967	4.301E-7	-0.00002075
Exported electrical energy (EEE)	Output	MJ	0	0	0.006391	0	0.062	0	0	0.3017	0.0000279	-0.00005084
Exported thermal energy (EET)	Output	MJ	0	0	0.09669	0	0.938	0	0	4.565	0.0004221	-0.0007692

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	506.3	1.398	8.589	16.47	0.2453	1239	1.981	0.5369	0.5245	-14.35
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.01128	0.000002538	0.000002204	0.0000226	4.268E-7	0.006769	0.000003597	4.674E-7	2.563E-7	-0.001067
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.3683	0.000283	0.004841	0.01728	0.00008304	0.7093	0.0004011	0.0002912	0.0002145	-0.06326
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-1.581	0.00003684	0.0001467	0.0004146	1.749	2.51	0.00005221	0.001055	0.0004905	-0.002862
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	41.36	0.0946	0.9453	1.164	0.01754	90.78	0.1341	0.5173	0.06349	-1.295
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	39.9	0.09468	0.9456	1.164	1.766	93.66	0.1342	0.5186	0.06433	-1.301
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.1188	0.00003459	0.000103	0.0005725	0.000005799	0.3745	0.00004903	0.0002329	0.0003445	-0.002385
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	41.74	0.09467	0.901	1.164	0.01754	93.47	0.1342	0.5183	0.06535	-1.526
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.007243	8.874E-7	0.00001714	0.000007588	1.44E-7	0.006529	0.000001258	0.000001364	0.000001796	-0.0004144
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.04664	0.00005572	0.001128	0.004149	0.00002746	0.07796	0.00007898	0.00008382	0.00007246	-0.003526
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.5904	0.0006231	0.01243	0.04621	0.0002973	1.015	0.0008831	0.0008971	0.0005241	-0.04801
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.206	0.0002333	0.004687	0.01252	0.00008547	0.2729	0.0003307	0.0002356	0.0002349	-0.01436
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00000888	2.058E-8	3.476E-8	2.563E-7	3.702E-9	0.000006225	2.916E-8	4.566E-9	3.218E-9	-0.002304
Water (user) deprivation potential (WDP)	m3 world eqv.	1286	0.4558	0.8019	10.64	0.3109	4832	0.646	6.953	2.059	1.277

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.769	0.00581	0.01241	0.07127	0.00105	22.48	0	0.008234	0.002997	0.001201	-0.03639
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002171	6.116E-9	5.679E-8	4.272E-8	1.227E-9	0.000005085	0	8.669E-9	1.727E-9	3.923E-9	-1.776E-7
Potential Soil quality index (SQP)²	unitless	121.6	0.9577	1.671	8.108	0.1646	624.1	0	1.357	0.1277	1.347	-12.23
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000002426	1.108E-9	4.125E-8	8.459E-9	4.1E-10	0.000006348	0	1.576E-9	6.481E-8	1.328E-9	-2.867E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	5.662E-8	0	2.61E-10	0	9E-12	2.695E-7	0	0	1.088E-9	1.79E-10	-6.469E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	3531	1.133	21.39	11.32	0.3271	5646	0	1.606	1.898	99.66	-514.2