Process Data set: Facet II 1200 D/I (en)

Process Data set: Facet II 1200 D/I (en) en

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Facet II 1200 D/I
Technical purpose of product or process	Facet II is a slim, minimalistic luminaire with white powdercoating. With the direct/indirect light and glare-free optics in PMMA it is perfect for classrooms or open offices where light comfort is very important. Wattage: 29W. Voltage: 220-240V. Leakage current (mA): B10: 13, B16: 24, C10: 21, C16: 38. Luminous flux: 4500lm. Efficacy: 155 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B10>100,000. L94>50.000. Light distribution: Direct/Indirect 65/35%. UGR: UGR<19. Control/Dimming type: DALI-2. Luminaire class: Class I. Contains light source of energy class: C. Housing: Sheet steel. Length: 1196 mm. Width: 112 mm. Height: 80 mm. EAN: 5703821171946. The EPD also covers the following products: EAN: 5703821171991 - Facet II 1200 White 4700lm 4000K Ra>80 On/Off EAN: 5703821171984 - Facet II 1200 White 4500lm 3000K Ra>80 On/Off EAN: 5703821172004 - Facet II 1200 White 4700lm 4000K Ra>80 DALI-2 Please note that the above has been calculated with the Norwegian energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Facet II 1200 D/I - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.156574074087 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-10-10 - 2030-10-10
Publication date	2025-10-10
Technological representativeness
Technology description including background system	Link to the CE Declaration on our website: https://www.sg-as.com/storage/data/130264_Facet%20II/50/130264_Facet%20II.pdf Link to product data on our website: https://www.sg-as.com/products/facet-ii/8246090313

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-12493-12582_Facet-II-1200-D-I.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-10-10T16:19:23
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	4a8aef85-4f93-4c34-a949-f3dc290a85af
Date of last revision	2025-09-29T15:05:40.9194295Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-12493-12582
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	52.01	0.02151	30.59	0.2883	0.00126	4265	0.04804	0.3684	0.1323	-6.033
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	2.773	0	0	0	-2.774	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	54.79	0.02151	30.59	0.2883	-2.772	4265	0.04804	0.3684	0.1323	-6.033
Use of non renewable primary energy (PENRE)	Input	MJ	515.1	1.578	33.95	20.14	0.07654	329.8	3.356	2.316	0.6019	-21.96
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	20.61	0	0	0	0	0	0	-21.92	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	535.7	1.578	33.95	20.14	0.07654	329.8	3.356	-19.6	0.6019	-21.96
Use of secondary material (SM)	Input	kg	2.268	0	0	0	0	0	0	0	0.002402	0.0393
Use of renewable secondary fuels (RSF)	Input	MJ	1.143	0.0007589	0.83	0.01031	0.00004179	3.349	0.001719	0.007509	0.00102	0.02215
Use of non renewable secondary fuels (NRSF)	Input	MJ	5.369	0.002954	0.5999	0.03687	0.0001723	8.344	0.006146	-0.00006168	0.02204	0.3664
Use of net fresh water (FW)	Input	m3	0.4519	0.000161	0.09021	0.002154	0.00003611	31.86	0.0003589	0.002633	0.0006066	-0.02197
Hazardous waste disposed (HWD)	Output	kg	0.2401	0.0000801	0.03086	0.001039	0	0.2115	0.0001731	0.00002919	0.1368	-0.007342
Non hazardous waste dispose (NHWD)	Output	kg	7.52	0.07016	1.771	0.9793	0.3382	25.37	0.1632	0.172	0.9991	-0.4959
Radioactive waste disposed (RWD)	Output	kg	0.001615	0.00001077	0.00009311	0.0001372	0	0.002949	0.00002286	0.000001492	0.000002002	-0.0000481
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	1.729	0	0.3146	0	0	2.588	0.00002579	-0.001538
Materials for energy recovery (MER)	Output	kg	0	0	0.151	0	0.02364	0	0	0.4199	6.309E-7	-0.0002025
Exported electrical energy (EEE)	Output	MJ	0	0	0.09827	0	0.01934	0	0	0.442	0.00004093	-0.0004962
Exported thermal energy (EET)	Output	MJ	0	0	1.487	0	0.2927	0	0	6.686	0.0006192	-0.007507

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	532.2	1.578	33.94	20.14	0.07654	329.3	3.356	2.315	0.6016	-21.96
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.005201	0.000002706	0.00001905	0.00003679	1.332E-7	0.001799	0.000006131	0.000001661	2.51E-7	-0.001523
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.3122	0.0006346	0.009296	0.003828	0.00002591	0.1885	0.0006379	0.0009721	0.0002302	-0.08721
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.224	0.00004237	0.1146	0.0005512	0.5741	0.6669	0.00009187	0.0009571	0.00002806	-0.004694
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	40.82	0.1061	2.577	1.332	0.005471	24.12	0.222	1.067	0.07718	-1.866
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	40.65	0.1062	2.698	1.333	0.5796	24.89	0.2221	1.068	0.07743	-1.876
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.06022	0.00004149	0.006575	0.000474	0.000001809	0.09951	0.000079	0.0003078	0.000215	-0.005447
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	41.2	0.1062	3.378	1.333	0.005473	24.84	0.2221	1.068	0.07743	-1.798
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.005319	8.048E-7	0.0001725	0.00001064	4.492E-8	0.001735	0.000001773	0.00001074	0.000001369	-0.0005333
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.04445	0.0001429	0.001804	0.0007573	0.000008569	0.02072	0.0001262	0.0002295	0.00009714	-0.004798
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.5022	0.001593	0.02384	0.008471	0.00009276	0.2697	0.001412	0.002517	0.0006981	-0.06509
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1671	0.0004878	0.005462	0.003245	0.00002666	0.07252	0.0005408	0.0006743	0.0002542	-0.01956
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000003051	2.388E-8	1.419E-7	3.017E-7	1.155E-9	0.000001654	5.028E-8	4.015E-8	5.343E-9	-0.002823
Water (user) deprivation potential (WDP)	m3 world eqv.	1916	1.417	400.8	19.48	0.097	1284	3.246	12.58	7.857	-71.44

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.989	0.006886	0.1386	0.08801	0.0003275	5.974	0	0.01467	0.01073	0.002489	-0.05499
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002303	5.816E-9	9.87E-8	8.153E-8	3.82E-10	0.000001351	0	1.359E-8	1.002E-8	3.921E-9	-2.413E-7
Potential Soil quality index (SQP)²	unitless	173.3	1.023	53.37	14.09	0.05135	165.8	0	2.348	0.7035	1.446	-15.77
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.00000257	1.163E-9	3.93E-8	1.631E-8	1.28E-10	0.000001687	0	2.718E-9	6.234E-8	1.419E-9	-3.663E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.024E-7	0	1.11E-9	0	3E-12	7.161E-8	0	0	1.321E-9	1.33E-10	-8.154E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2566	1.147	54.98	14.93	0.1021	1.5E+3	0	2.488	9.037	419.5	-679