Process Data set: Rax Soft 150 Connect Wireless (en)

Process Data set: Rax Soft 150 Connect Wireless (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Rax Soft 150 Connect Wireless
Technical purpose of product or process	A version of Rax Soft, which is combined with a wide range of SG Connect Driver Kit Wireless (not included) to provide the desired amount of light. The lighting control is easy to configure using the SG Connect Commissioning App, and the luminaire can be used with a wireless sensor or as part of a larger system, along with other SG Connect luminaires with integrated sensors, which can easily be enlarged or reconfigured as needed. The light is turned on and off after a defined period of time, contributing to energy saving. Rax Soft Connect is installed easily with springs that fit ceiling panels with a thickness of 1–50 mm. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 2. Lifetime: L90/B10>100,000, . Light distribution: Direct. Control/Dimming: Connect Wireless. Luminiare class: Class II SELV. Housing: Flame retardant polycarbonate. Optics: Polycarbonat (PC). Height: 83.0mm. Diameter: 166,0 mm. Cut-out: 150,0mm. EAN: 7021982127700 The EPD also covers the following products: EAN: 7021982127717 - RAX SOFT 150 CONNECT WIRELESS SATIN 4000K
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Rax Soft 150 Connect Wireless - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.079846610767 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-06-04 - 2030-06-04
Publication date	2025-06-04
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/rax-soft-150-connect-wireless/212770/pdf/specification_212770.pdf Link to CE Declaration: null

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11324-11258_Rax-Soft-150-Connect-Wireless.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-08-05T14:03:16
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	4a8722f5-ad89-4567-a5e4-8e6b59eadfcc
Date of last revision	2025-06-03T14:05:07.0291366Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-11324-11258
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	7.794	0.0008667	0.2906	0.04937	0.0006422	3987	0.006214	0.005141	0.006186	-1.174
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	1.047	0	0	0	-1.047	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	8.841	0.0008667	0.2906	0.04937	-1.047	3987	0.006214	0.005141	0.006186	-1.174
Use of non renewable primary energy (PENRE)	Input	MJ	59.59	0.07659	2.897	4.345	0.03901	308.3	0.549	0.0631	0.05895	0.4539
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	5.735	0	0	0	0	0	0	-5.756	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	65.32	0.07659	2.897	4.345	0.03901	308.3	0.549	-5.693	0.05895	0.4539
Use of secondary material (SM)	Input	kg	0.4247	0	0	0	0	0	0	0	0.00001835	0.0001428
Use of renewable secondary fuels (RSF)	Input	MJ	0.03223	0.00001695	0.0002515	0.001627	0.0000213	3.131	0.0001215	0.000113	0.0001152	-0.0005504
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.005028	0.000144	0.002379	0.008715	0.00008781	7.8	0.001032	-8.594E-7	0.0002144	-0.09846
Use of net fresh water (FW)	Input	m3	0.04605	0.000008564	0.007623	0.0003736	0.00001841	29.78	0.00006139	0.0003317	0.000074	-0.0003213
Hazardous waste disposed (HWD)	Output	kg	0.02863	0.000006921	0.0003969	0.0002119	0	0.1977	0.00004962	4.24E-7	0.004405	-0.0002632
Non hazardous waste dispose (NHWD)	Output	kg	0.5328	0.003676	0.0271	0.1342	0.1724	23.72	0.02636	0.0005725	0.2085	0.0145
Radioactive waste disposed (RWD)	Output	kg	0.00009072	5.026E-7	0.000002272	0.00002982	0	0.002757	0.000003603	2.106E-8	3.875E-7	0.000001328
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.01878	0	0.1603	0	0	0.2317	0.00001032	-0.00000559
Materials for energy recovery (MER)	Output	kg	0	0	0.00308	0	0.0003288	0	0	0.115	2.523E-7	-7.36E-7
Exported electrical energy (EEE)	Output	MJ	0	0	0.002857	0	0.009859	0	0	0.1767	0.00001637	-0.000001803
Exported thermal energy (EET)	Output	MJ	0	0	0.04322	0	0.1492	0	0	2.673	0.0002476	-0.00002728

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	65.32	0.07658	2.897	4.345	0.03901	307.8	0.549	0.06308	0.05895	0.4539
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.001076	1.39E-7	0.000001006	0.000005864	6.787E-8	0.001682	9.968E-7	4.054E-8	1.985E-8	-0.00002184
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.03367	0.00001551	0.001709	0.004743	0.0000132	0.1762	0.0001112	0.00006973	0.00002004	-0.0006384
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.2516	0.000002018	0.0004998	0.0001091	0.2919	0.6235	0.00001447	0.00001131	0.000001335	0.0002121
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	5.83	0.005183	0.3242	0.3077	0.002789	22.55	0.03716	0.2745	0.01464	0.04204
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	5.586	0.005187	0.3247	0.3078	0.2947	23.27	0.03719	0.2745	0.01465	0.04283
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.008306	0.000001895	0.00005102	0.0001532	9.222E-7	0.09303	0.00001359	0.000005314	0.000002373	0.0005828
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	5.876	0.005187	0.3065	0.3078	0.002789	23.22	0.03719	0.2745	0.01524	0.04634
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0003029	4.862E-8	0.000007236	0.000001963	2.29E-8	0.001622	3.486E-7	1.525E-7	4.395E-8	-0.000003812
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.005374	0.000003053	0.000354	0.001141	0.000004367	0.01937	0.00002189	0.00003028	0.0000207	-0.00002844
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.05978	0.00003414	0.003897	0.01271	0.00004728	0.2521	0.0002447	0.0003121	0.00007874	-0.0004544
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.01813	0.00001278	0.001033	0.003434	0.00001359	0.0678	0.00009164	0.00007589	0.00002552	-0.00007066
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	2.025E-7	1.128E-9	4.878E-9	6.78E-8	5.89E-10	0.000001546	8.081E-9	7E-10	7.38E-10	-0.001192
Water (user) deprivation potential (WDP)	m3 world eqv.	146.4	0.02497	0.4651	2.877	0.04944	1.2E+3	0.179	0.4142	1.014	31.13

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.1034	0.0003183	0.002527	0.01884	0.0001669	5.585	0	0.002282	0.0002147	0.0003351	0.001157
Potential incidence of disease due to PM emissions (PM)²	disease incidence	3.977E-7	3.35E-10	2.305E-8	1.088E-8	1.94E-10	0.000001263	0	2.402E-9	3.34E-10	3.71E-10	-4.844E-9
Potential Soil quality index (SQP)²	unitless	12.69	0.05247	0.6145	2.096	0.02617	155	0	0.3762	0.0116	0.1581	-1.694
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	1.697E-7	5.9E-11	4.143E-9	2.169E-9	6.5E-11	0.000001577	0	4.37E-10	1.576E-9	7.2E-11	-3.573E-9
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	5.467E-9	0	9E-11	0	2E-12	6.694E-8	0	0	2.9E-11	4E-12	1.49E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	249.6	0.06209	8.474	2.96	0.05202	1403	0	0.4451	0.6147	56.95	-6.771