Process Data set: EQLQ Tube Pure 3G2,5 (en)

Process Data set: EQLQ Tube Pure 3G2,5 (en) en

Process information

Key Data Set Information
Location	FI
Geographical representativeness description	Scandinavia (El.mix during use stage (B6) is Swedish)
Reference year	2024
Name	EQLQ Tube Pure 3G2,5
Technical purpose of product or process	Halogen-free, flame retardant and self-extinguishing cable. Smoke in the event of fire is limited, transparent (to facilitate evacuation) and not harmful to electronic equipment. Suitable for fixed installation indoors and outdoors, in pipes, duct, in or under plaster, also suspended in catenary system. The cable is not approved for EX classified areas, instead we recommend a filled cable, for example EQLQ Filled Pure. Can be installed in ground if the cable is provided with additional protection against mechanical damage. UV protected for outdoor use in the Nordic countries. The conductor insulation shall be protected against UV light in lighting fixtures and light signs. Conductor material: Copper Core insulation material: XLPE Screen material: Aluminium Material outer sheath: Halogen-free polymer Cable shape: Round
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Prysmian Group Sverige AB
Quantitative reference
Reference flow(s)	EQLQ Tube Pure 3G2,5 - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-07-11" - "2029-07-11"
Publication date	2024-07-11
Technological representativeness
Technology description including background system	EQLQ Tube Pure 3G2,5 SAP code 20314594 E no. 0461310 STANDARDS APPLIED: SS 424 02 19-6 Construction standard

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

NEPD-7102-6497_EQLQ-Tube-Pure-3G2-5.pdf

Original EPDs

NEPD-7102-6497

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-09-30T11:40:07
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	4a7a8c87-9ba1-4e5e-bfb9-ff059b4adfc0
Date of last revision	2024-07-08T05:44:27.2166476Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-7102-6497
Owner of data set	Prysmian Group Sverige AB
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	1.247	0.006583	0.432	0.0098	0.03398	7.659	0.001633	0.0005384	0.001888	-0.6723
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	1.247	0.006583	0.432	0.0098	0.03398	7.659	0.001633	0.0005384	0.001888	-0.6723
Use of non renewable primary energy (PENRE)	Input	MJ	7.338	0.5652	1.448	0.6945	0.2038	15.97	0.1158	0.01028	0.01883	-0.7295
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	1.371	0	0	0	0.001468	0	0	-1.298	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	8.709	0.5652	1.448	0.6945	0.2053	15.97	0.1158	-1.287	0.01883	-0.7295
Use of secondary material (SM)	Input	kg	0.01798	0	0	0	0.0003596	0	0	0	0	0.005154
Use of renewable secondary fuels (RSF)	Input	MJ	0.02598	0.0002248	0.005056	0.0003508	0.0006343	0.02968	0.00005846	0.00001182	0.00003918	0.0003409
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.0004165	0.0007071	0.01618	0.001252	0.0003761	0.09377	0.0002087	0	0.00003911	-0.02399
Use of net fresh water (FW)	Input	m3	0.008185	0.00005663	0.001615	0.00007313	0.0002009	0.0174	0.00001219	0.00007969	0.00002413	-0.00194
Hazardous waste disposed (HWD)	Output	kg	0.004377	0.00002909	0.003674	0.00003542	0.0001914	0.0008335	0.000005903	0	0.001449	-0.00003599
Non hazardous waste dispose (NHWD)	Output	kg	0.1965	0.03669	0.007305	0.03319	0.006936	0.05262	0.005532	0	0.06756	-0.02162
Radioactive waste disposed (RWD)	Output	kg	0.00002422	0.000003873	0.00001566	0.000004735	9.881E-7	0.0002402	7.892E-7	0	1.284E-7	-0.000002596
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.00009135	0	0.001047	0	0	0.05227	0.000003064	-0.0002017
Materials for energy recovery (MER)	Output	kg	0	0	0.01529	0	0.0009889	0	0	0.03416	7.494E-8	-0.00002656
Exported electrical energy (EEE)	Output	MJ	0	0	0.009021	0	0.001283	0	0	0.05511	0.000004862	-0.00006507
Exported thermal energy (EET)	Output	MJ	0	0	0.1365	0	0.01941	0	0	0.8338	0.00007355	-0.0009845

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	8.655	0.5651	1.399	0.6945	0.2292	15.93	0.1157	0.01028	0.01883	-0.7295
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0001425	6.22E-7	3.833E-7	0.000001247	0.000002899	0.000005441	2.079E-7	7.842E-9	6.245E-9	-0.00001656
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.01844	0.0003953	0.000208	0.0001883	0.0003857	0.0008852	0.00003138	0.0000168	0.00000635	-0.003266
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.006699	0.00001432	0.001994	0.00001878	0.0001746	0.002763	0.00000313	0.00000158	3.558E-7	-0.0002737
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	0.5856	0.03798	0.0543	0.04606	0.01642	0.136	0.007676	0.08512	0.004386	-0.06201
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	0.5934	0.03801	0.0568	0.04609	0.01663	0.1476	0.007682	0.08512	0.004387	-0.06322
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.001068	0.00001416	0.0005028	0.0000161	0.00003209	0.00883	0.000002683	2.885E-7	2.615E-7	-0.0009368
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	0.5915	0.03801	0.07105	0.04609	0.01688	0.1474	0.007682	0.08511	0.004561	-0.05194
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0001571	2.595E-7	0.000002047	3.617E-7	0.000003198	0.000009193	6.028E-8	1.412E-8	1.224E-8	-0.00002189
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.00129	0.0001049	0.0000372	0.00005583	0.00003023	0.0001508	0.000009306	0.00000804	0.00000633	-0.0001683
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.01821	0.001163	0.0004267	0.0006175	0.0004126	0.001985	0.0001029	0.00008307	0.00002545	-0.002397
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.004789	0.0003255	0.0001092	0.0001891	0.0001094	0.0004521	0.00003151	0.00002001	0.000008049	-0.0006759
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	4.218E-8	8.503E-9	6.477E-9	1.05E-8	1.396E-9	6.666E-8	1.75E-9	1.57E-10	2.38E-10	-0.0003522
Water (user) deprivation potential (WDP)	m3 world eqv.	40.58	0.3895	77.06	0.6625	2.385	1617	0.1104	0.0678	0.3488	-22.57

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.02518	0.002462	0.03415	0.003036	0.001309	0	0	0	0	0	0.5462	0	0	0.0005059	0.00002479	0.0001113	-0.002826
Potential incidence of disease due to PM emissions (PM)²	disease incidence	6.061E-8	2.747E-9	9.74E-10	3.316E-9	1.368E-9	0	0	0	0	0	6.376E-9	0	0	5.53E-10	7.3E-11	1.18E-10	-1.109E-8
Potential Soil quality index (SQP)²	unitless	4.197	0.4995	0.8545	0.4788	0.1232	0	0	0	0	0	7.055	0	0	0.0798	0.001798	0.0489	-0.8117
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	2.873E-7	4.08E-10	7.19E-10	5.53E-10	5.786E-9	0	0	0	0	0	5.823E-9	0	0	9.2E-11	1.89E-10	2.3E-11	-3.444E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	4.03E-9	0	2.6E-11	0	8.1E-11	0	0	0	0	0	2.42E-10	0	0	0	4E-12	1E-12	-4.91E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	203.4	0.3966	1.027	0.5115	4.518	0	0	0	0	0	8.408	0	0	0.08525	0.1421	20.29	-28.18