Process Data set: Grout EKF 802LM / 804LM Winter (en)

Process Data set: Grout EKF 802LM / 804LM Winter (en) en

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Denmark
Reference year	2024
Name	Grout EKF 802LM / 804LM Winter
Use advice for data set	All processes from raw material extraction, to production, transport to the construction site and assembly, are included in the analysis as well as end of life stage and phases beyond the system boundary.
Technical purpose of product or process	Marlon Grout EKF 802LM/804LM Winter is a factory-produced expanding liquid mortar made of Portland cement, mineral adhesives, additives, latex polymer and ovendried silica sand with a controlled grain curve. The product’s high content of latex polymer gives the mortar particularly good flow and adhesive properties. Marlon Grout EKF 802LM/804LM Winter requires only the addition of water and, when mixed, is a very fluid pumpable mortar. See link for more information about Marlon Grout EKF 802LM Winter at: https://marlon.dk/catalog/product/view/id/110/s/flydemortel-ekf-802lm-100051925pp/ and Marlon Grout EKF 804LM Winter at: https://marlon.dk/catalog/product/view/id/113/s/flydemortel-ekf-804lm-100052125pp/. This EPD includes: Item no 1000520 Grout EKF 802LM Winter Item no 1000522 Grout EKF 804LM Winter
Classification	Class name : Hierarchy level EPDNorge: Construction / Technical-chemical building materials products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Marlon Tørmørtel A/S
Quantitative reference
Reference flow(s)	Grout EKF 802LM / 804LM Winter - 1.0 * 1.0 kg (Mass)
Biogenic carbon content	Carbon content (biogenic): 1.0 kg Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	2024-10-04 - 2029-10-04
Publication date	2024-10-04
Technological representativeness
Technology description including background system	Marlon Grout EKF 802LM/804LM Wintewr is produced and declared according to DS/EN 1504-3. Compressive strength, 28 days > 70 MPa Bending tensile strength, 28 days > 8 MPa For more information see DoP at: https://marlon.dk/en

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 009:2021 Part B for Technical - Chemical products for building and construction industry

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 009:2021 Part B for Technical - Chemical products for building and construction industry

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-7703-7078_Grout-EKF-802LM---804LM-Winter.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Linda Høibye

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-02-23T15:55:24
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	457f0334-113c-437f-a6c5-f32987babbbe
Date of last revision	2024-10-02T06:24:30.614114Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-7703-7078
Owner of data set	Marlon Tørmørtel A/S
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	0.3151	0.00579	0.05088	0.0003	0.001815	0.01022	0.0008082	-0.008163
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.3167	0	-0.3163	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	0.6319	0.00579	0.03425	0.0003	0.001815	0.01022	0.0008082	-0.008163
Use of non renewable primary energy (PENRE)	Input	MJ	3	0.4045	0.06666	0.05507	0.1286	0.01985	0.02257	-0.03679
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	0.2848	0	0	0	0	0	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	3.285	0.4045	0.06666	0.05507	0.1286	0.01985	0.02257	-0.03679
Use of secondary material (SM)	Input	kg	0.02521	0	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.0102	0.0002072	0.001909	0	0.00006497	0	0.00001677	-0.0001669
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.002895	0.0007407	0.00002544	0	0.000232	0	0.00003621	-0.0001715
Use of net fresh water (FW)	Input	m3	0.003358	0.00004326	0.0003373	0.000002834	0.00001355	0.000034	0.00002777	-0.00128
Hazardous waste disposed (HWD)	Output	kg	0.0005106	0.00002086	0.000007912	0.000001621	0.000006561	0.000001983	0	-0.000008403
Non hazardous waste dispose (NHWD)	Output	kg	0.03563	0.01967	0.0216	0.00006521	0.006148	0.00006263	0.1	-0.0002548
Radioactive waste disposed (RWD)	Output	kg	0.00001461	0.000002755	1.894E-7	3.824E-7	8.771E-7	2.099E-7	0	-2.765E-7
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.0005093	0	0	0.9	0	0
Materials for energy recovery (MER)	Output	kg	0.0009219	0	0.00000731	0	0	0	0	0
Exported electrical energy (EEE)	Output	MJ	0.0005695	0	0.0004985	0	0	0	0	0
Exported thermal energy (EET)	Output	MJ	0.008616	0	0.007541	0	0	0	0	0

Core environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	3.16	0.4045	0.06664	0.05507	0.1286	0.01985	0.02257	-0.03486
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.000003178	7.39E-7	5.06E-8	6.14E-9	2.311E-7	8.11E-9	7.388E-9	-1.83E-7
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.002051	0.00007688	0.00002021	0.00004186	0.00003487	0.000005173	0.000007296	-0.00001855
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.03425	0.00001107	0.03467	7.502E-7	0.000003478	0.000005521	9.577E-7	-0.00004111
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	0.5005	0.02675	0.004953	0.004	0.008531	0.000639	0.0008204	-0.00206
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	0.4664	0.02677	0.03963	0.004	0.008538	0.000648	0.0008215	-0.002103
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.0001614	0.000009522	0.000006262	3.154E-7	0.000002982	8.843E-7	2.016E-7	-0.000001393
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	0.506	0.02677	0.00637	0.004	0.008537	0.001187	0	-0.002204
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.000007099	2.137E-7	3.761E-7	1.457E-8	6.699E-8	4.038E-8	9.298E-9	-5.477E-8
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.0006649	0.00001521	0.00000366	0.00001848	0.00001034	0.000001516	0.000002711	-0.000006433
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.005807	0.0001702	0.00005031	0.0002	0.0001144	0.00001746	0.00002991	-0.00007559
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.001419	0.00006518	0.00001135	0.00005574	0.00003502	0.000004676	0.000008564	-0.00001995
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	2.819E-8	6.06E-9	2.66E-10	8.64E-10	1.945E-9	1.26E-10	3.11E-10	-3.75E-10
Water (user) deprivation potential (WDP)	m3 world eqv.	14.13	0.3912	0.974	0.0117	0.1227	2.19	0.1392	-1.635

Additional environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.01219	0.001768	0.0003262	0.00024	0.0005623	0.000333	0.000103	-0.0003199
Potential incidence of disease due to PM emissions (PM)²	disease incidence	1.145E-8	1.638E-9	1.28E-10	5.066E-9	6.14E-10	8.3E-11	1.56E-10	-3.95E-10
Potential Soil quality index (SQP)²	unitless	1.88	0.2829	0.1101	0.00669	0.08869	0.01122	0.0869	0.07912
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	4.527E-9	3.28E-10	7.6E-11	2.8E-11	1.02E-10	1.3E-11	9E-12	-4.4E-11
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	1.12E-10	0	2E-12	1E-12	0	1E-12	1E-12	-2E-12
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	5.049	0.2998	0.1101	0.0301	0.09474	0.01407	0.01232	-0.03589