Process Data set: FXQJ/IFSI EMC 4x240/120 0,6/1kV Dca (en)

Process Data set: FXQJ/IFSI EMC 4x240/120 0,6/1kV Dca (en) en

Process information

Key Data Set Information
Location	SE
Geographical representativeness description	Northern Europe
Reference year	2024
Name	FXQJ/IFSI EMC 4x240/120 0,6/1kV Dca
Technical purpose of product or process	Cables according to this standard are halogen-free and flame retardant. In case of fire, only smoke free of corrosive gases and with low smoke density are emitted. Intended for permanent installation in- and outdoors, in ground, in water and in pipes. Caution shall be taken into account if plowing. Installation of the product should only be carried out by personnel trained and qualified for electrical works. The product is designed according to recognized standards. Applicable rules of installation must be applied at all times. 1. Copper conductor 2. XLPE insulation 3. Bedding 4. Concentric copper conductor with counterhelix 5. Halogen-free flame retardant polyolefine sheath
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	NKT headquarter Denmark A/S
Quantitative reference
Reference flow(s)	FXQJ/IFSI EMC 4x240/120 0,6/1kV Dca - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-05-07" - "2029-05-07"
Publication date	2024-05-07
Technological representativeness
Technology description including background system	Norm (standard): SS4241418 Rated voltage Uo/U: 0,6/1 kV Test voltage: 15 (DC) kV Maximal short-circuit temperature: 250 °C Maximal operating conductor temperature: 90 °C Temperature range: from -20 up to +70 °C Min. temperature for laying and manipulation: -20 °C Min. storage temperature: -30 °C Self-extinguishing of one cable: IEC 60332-1 Smoke density: IEC 61034 Corrosivity of emitted gases: EN 60754-1 Conductivity - pH change : EN 60754-2 CPR-Classification (reaction on fire): Dca-s2,d2,a2 UV stability: Yes Max. permitted pulling force: 50 N/mm2 Radius of bend minimal: 8 x D mm Packaging: drum Production site: NKT Falun RoHS: Yes REACH: Yes CE Conformity: Yes LVD Conformity: Yes

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

NEPD-6536-5804_FXQJ-IFSI-EMC-4x240-120-0-6-1kV-Dca.pdf

Original EPDs

NEPD-6536-5804

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-09-29T23:51:43
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	4549eaa7-2849-4c3a-a4bd-3d1e8f137312
Date of last revision	2024-04-30T14:30:48.4568104Z
Data set version	00.05.000
Registration authority	EPD Norway
Registration number	NEPD-6536-5804
Owner of data set	NKT headquarter Denmark A/S
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	124.7	0.3032	35.74	0.2669	3.228	0.2003	0.1144	0.007807	0.1846	-39.8
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	124.7	0.3032	35.74	0.2669	3.228	0.2003	0.1144	0.007805	0.1846	-39.8
Use of non renewable primary energy (PENRE)	Input	MJ	890.3	21.26	65.88	18.65	19.96	0.2068	7.992	0.1614	1.413	-81.37
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	32.72	0	0	0	0.03117	0	0	-31.17	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	923.1	21.26	65.88	18.65	20.03	0.2068	7.992	-31	1.413	-81.37
Use of secondary material (SM)	Input	kg	2.121	0	0	0	0.04281	0	0	0	0.01927	2.625
Use of renewable secondary fuels (RSF)	Input	MJ	0.5794	0.01084	0.1221	0.00955	0.01453	0.002023	0.004093	0.0001765	0.003829	0.2483
Use of non renewable secondary fuels (NRSF)	Input	MJ	1.427	0.03868	-0.18	0.03415	0.02641	0	0.01463	0	0.001067	0.08417
Use of net fresh water (FW)	Input	m3	1.322	0.002266	0.0864	0.001994	0.02832	0.000911	0.0008547	0.001113	0.001842	-0.2287
Hazardous waste disposed (HWD)	Output	kg	0.7326	0.001095	0.2684	0.0009617	0.02311	0.00001908	0.0004122	0	0.1513	-0.1017
Non hazardous waste dispose (NHWD)	Output	kg	24.18	1.028	0.5692	0.9069	0.6236	0.001264	0.3887	0	4.492	-4.353
Radioactive waste disposed (RWD)	Output	kg	0.001881	0.0001448	0.0009699	0.000127	0.00006273	0.000002133	0.00005444	0	0.000009813	-0.00009658
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.01173	0	0.1159	0	0	5.77	0.00008833	-0.1027
Materials for energy recovery (MER)	Output	kg	0	0	1.078	0	0.01171	0	0	0.5851	0.0004871	-0.01353
Exported electrical energy (EEE)	Output	MJ	0	0	0.6328	0	0.03259	0	0	0.9902	0.004397	-0.03314
Exported thermal energy (EET)	Output	MJ	0	0	9.574	0	0.4931	0	0	14.98	0.06652	-0.5014

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	921.3	21.26	65.74	18.65	20.58	0.2036	7.991	0.1614	1.413	-81.39
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.02253	0.00003866	0.000006309	0.00003407	0.0004522	1.172E-7	0.0000146	1.167E-7	4.671E-7	-0.00844
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	8.179	0.004368	0.00382	0.003544	0.1638	0.00003476	0.001519	0.0002715	0.0004757	-1.507
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	1.706	0.000581	0.2147	0.0005104	0.03846	0.0001377	0.0002188	0.00002396	0.000006206	-0.04189
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	77.18	1.408	1.241	1.233	1.654	0.007536	0.5285	1.532	0.1225	-9.058
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	78.95	1.409	1.794	1.234	1.701	0.008086	0.5289	1.532	0.1226	-9.113
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.06419	0.0005039	0.3377	0.000439	0.008083	0.0004128	0.0001881	0.00000425	0.00002287	-0.01246
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	78.77	1.409	1.742	1.234	1.693	0.01096	0.5289	1.532	0.06788	-4.345
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0806	0.0000112	0.00003366	0.000009853	0.001613	4.985E-7	0.000004223	2.16E-7	0.000001068	-0.01016
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.2637	0.0008826	0.001329	0.0007013	0.00534	0.000005491	0.0003006	0.00013	0.0002399	-0.06211
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	3.797	0.009866	0.01341	0.007844	0.07663	0.00007373	0.003362	0.001356	0.001916	-0.9621
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	1.202	0.003657	0.00335	0.003005	0.02425	0.00001727	0.001288	0.0003262	0.0005567	-0.2613
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000004464	3.186E-7	2.96E-7	2.794E-7	1.076E-7	8.15E-10	1.197E-7	2.368E-9	1.731E-8	-0.006328
Water (user) deprivation potential (WDP)	m3 world eqv.	24.95	20.46	1.007E+4	18.04	204.1	15.74	7.73	0.9429	34.19	475.7

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.852	0.09291	2.185	0.0815	0.08458	0	0	0	0	0	0.004644	0	0	0.03493	0.0003689	0.009211	-0.1075
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.00001427	8.582E-8	6.182E-8	7.55E-8	2.9E-7	0	0	0	0	0	1.84E-10	0	0	3.236E-8	1.15E-9	8.347E-9	-0.000003055
Potential Soil quality index (SQP)²	unitless	778	14.79	26.53	13.04	16.7	0	0	0	0	0	0.1534	0	0	5.59	0.02672	2.729	-184.1
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.0001338	1.72E-8	1.883E-8	1.51E-8	0.000002677	0	0	0	0	0	1.56E-10	0	0	6.472E-9	2.809E-9	2.032E-9	-0.00001677
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	0.000001501	0	8.28E-10	0	3.003E-8	0	0	0	0	0	6E-12	0	0	0	6.5E-11	1.11E-10	-1.957E-7
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	6.144E+4	15.74	28.59	13.82	1278	0	0	0	0	0	0.2549	0	0	5.924	1.926	2381	-1.386E+4