Process Data set: Sense Surface 300x1200 (en)

Process Data set: Sense Surface 300x1200 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Sense Surface 300x1200
Technical purpose of product or process	Sense Surface is an elegant, thin surface mounted luminaire, illuminated by a side light LED solution.Easy tool-free installation, with quick connector between bracket and the front is held by strong magnets with restraining strap. An innovative mechanism lets you choose whether the front should be totally flush with the ceiling for hidden cabling or floating slightly below for surface cabling. System Wattage: 29.0 W. Luminous flux: 3790lm. Efficacy: 131 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000, L90>50,000. Light distribution: Direct. Control/Dimming: Trailing edge dimming. Luminiare class: Class II. Housing: Aluminium. Optics: Acrylic (PMMA). Height: 45.0mm. Length: 1202.0 mm. Width: 302.0 mm. EAN: 7021982123603 The EPD also covers the following products: EAN: 7021982123511 - SENSE SURFACE 300x1200 BLACK 3000K EAN: 7021982123672 - SENSE SURFACE 300x1200 4000K EAN: 7021982124044 - SENSE SURFACE 300x1200 BLACK 4000K Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Sense Surface 300x1200 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.568473969295 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-04-11 - 2030-04-11
Publication date	2025-04-11
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/sense-surface/212360/pdf/specification_212360.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/701564_Sense%20Surface/50/701564_Sense%20Surface.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-9745-9687_Sense-Surface-300x1200.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-09-01T01:41:12
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	3d0f042d-ab6c-4a2d-acdb-6953a08f80a9
Date of last revision	2025-04-10T15:07:46.9108091Z
Data set version	00.06.000
Registration authority	EPD Norway
Registration number	NEPD-9745-9687
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	179.5	0.05219	2.119	0.5675	0.004574	4126	0.068	0.5401	0.5183	-15.9
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	7.402	0	0	0	-7.402	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	186.9	0.05219	2.119	0.5675	-7.398	4126	0.068	0.5401	0.5183	-15.9
Use of non renewable primary energy (PENRE)	Input	MJ	1687	4.611	26.05	49.96	0.2778	319	6.008	2.516	1.842	-34.86
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	62.32	0	0	0	0	0	0	-63.24	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	1749	4.611	26.05	49.96	0.2778	319	6.008	-60.73	1.842	-34.86
Use of secondary material (SM)	Input	kg	3.265	0	0	0	0	0	0	0	0.01226	0.008645
Use of renewable secondary fuels (RSF)	Input	MJ	0.412	0.001021	0.001173	0.01833	0.0001517	3.24	0.00133	0.007507	0.002018	0.07646
Use of non renewable secondary fuels (NRSF)	Input	MJ	6.206	0.008667	0.01279	0.0999	0.0006254	8.072	0.01129	-0.00008057	0.1077	1.574
Use of net fresh water (FW)	Input	m3	1.334	0.0005156	0.01624	0.004357	0.0001311	30.82	0.0006719	0.005188	0.001397	-0.03789
Hazardous waste disposed (HWD)	Output	kg	0.6173	0.0004167	0.002171	0.002536	0	0.2046	0.000543	0.00005517	0.5955	-0.01918
Non hazardous waste dispose (NHWD)	Output	kg	18.85	0.2213	0.271	1.584	1.228	24.54	0.2884	0.242	1.694	-1.275
Radioactive waste disposed (RWD)	Output	kg	0.004238	0.00003026	0.0000506	0.0003421	0	0.002853	0.00003943	0.000003828	0.000003087	-0.0000475
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.1339	0	1.142	0	0	2.87	0.00008346	-0.0003383
Materials for energy recovery (MER)	Output	kg	0	0	0.01261	0	0.001931	0	0	1.08	0.000002041	-0.00004455
Exported electrical energy (EEE)	Output	MJ	0	0	0.01938	0	0.07021	0	0	1.43	0.0001324	-0.0001092
Exported thermal energy (EET)	Output	MJ	0	0	0.2932	0	1.062	0	0	21.63	0.002003	-0.001651

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	1706	4.611	26.05	49.95	0.2778	318.6	6.008	2.516	1.84	-34.86
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0236	0.000008371	0.000006685	0.00006854	4.833E-7	0.00174	0.00001091	0.000002175	8.685E-7	-0.001429
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	1.235	0.0009336	0.01468	0.05239	0.00009404	0.1823	0.001216	0.001297	0.000743	-0.1269
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-1.375	0.0001215	0.000445	0.001258	2.081	0.6452	0.0001584	0.001069	0.0001205	-0.006085
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	137.6	0.3121	2.867	3.53	0.01986	23.34	0.4067	2.633	0.2499	-3.542
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	136.5	0.3123	2.868	3.531	2.101	24.08	0.407	2.635	0.2511	-3.556
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.2769	0.0001141	0.0003124	0.001736	0.000006568	0.09627	0.0001487	0.0007386	0.001077	-0.007077
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	138.6	0.3123	2.732	3.531	0.01987	24.03	0.407	2.634	0.2559	-4.606
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.02407	0.000002927	0.00005199	0.00002301	1.63E-7	0.001678	0.000003815	0.00001025	0.000005801	-0.0009549
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.1475	0.0001838	0.003422	0.01258	0.0000311	0.02004	0.0002395	0.0003935	0.0002857	-0.008001
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	1.952	0.002055	0.03771	0.1401	0.0003367	0.2609	0.002678	0.004204	0.001908	-0.1062
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.5149	0.0007697	0.01422	0.03798	0.00009679	0.07016	0.001003	0.001095	0.000817	-0.03364
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00001178	6.786E-8	1.054E-7	7.773E-7	4.192E-9	0.0000016	8.843E-8	4.986E-8	1.254E-8	-0.009579
Water (user) deprivation potential (WDP)	m3 world eqv.	3934	1.504	2.432	32.27	0.3521	1242	1.959	21.63	10.45	72.55

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	5.595	0.01916	0.03762	0.2161	0.001189	5.779	0	0.02497	0.01276	0.00492	-0.05375
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.00000725	2.018E-8	1.722E-7	1.295E-7	1.388E-9	0.000001307	0	2.629E-8	1.18E-8	1.333E-8	-4.828E-7
Potential Soil quality index (SQP)²	unitless	353.1	3.159	5.069	24.59	0.1864	160.4	0	4.117	0.7946	4.769	-30.59
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000008014	3.671E-9	1.251E-7	2.565E-8	4.65E-10	0.000001632	0	4.78E-9	1.427E-7	4.641E-9	-7.326E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.04E-7	0	7.91E-10	0	1.1E-11	6.927E-8	0	0	2.675E-9	5.75E-10	-2.196E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	8799	3.738	64.87	34.34	0.3705	1451	0	4.871	13.09	451.3	-1144