Process Data set: Switch surface mounted IP55 (en)

Process Data set: Switch surface mounted IP55 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Switch surface mounted IP55
Technical purpose of product or process	Switches for use where IP55 is required, with 2-pole break or 1-pole momentary. The switch base can be removed, allowing for cable routing underneath. It also has an additional screw terminal in the base that can be used for ground wires. Cable bushings in soft polymer, 2 up, 1 down (or vice versa if the connection insert is flipped). The cable bushings can be removed and replaced by a strain relief (accessory). There are also weak points for cable entry from behind, making it IP44, and weak points for drainage must be opened. Voltage: 250V. Current: 16A. IP Class: IP55. Material: Polycarbonate (PC). Colour: White RAL 9003. Mounting: Indoor/Outdoor. Length (mm): 84. Width (mm): 71. Height (mm): 44. EAN: 7021987669014. The EPD also covers the following products: EAN: 7021987658018 - SWITCH SURFACE MOUNTED IP55 WHITE EAN: 7021987669113 - SWITCH SURFACE MOUNTED PUSH IP55 BLACK EAN: 7021987658117 - SWITCH SURFACE MOUNTED IP55 BLACK
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Switch surface mounted IP55 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.003703703704 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-07-28 - 2030-07-28
Publication date	2025-07-28
Technological representativeness
Technology description including background system	Declaration data: Standards: EN 60669-1:2018 (Switches for household and similar fixed installations). Link to product data on our website: https://www.sg-as.com/products/switch-surface-outdoor-ip55/76690/pdf/specification_76690.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

PCR EPD Italy 012 - Electronic and electrical products and systems - Switches

Data sources, treatment and representativeness

Documentation of data quality management

PCR EPD Italy 012 - Electronic and electrical products and systems - Switches

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11890-11844_Switch-surface-mounted-IP55.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-10-05T14:49:36
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	2f7fe6d5-77aa-4c07-b15a-187b324f7fa6
Date of last revision	2025-07-23T08:47:11.9150212Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-11890-11844
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	0.6079	0.000607	0.2316	0.008529	0.00002981	0.001265	0.0009469	0.0006425	-0.6312
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.0468	0	0	0	-0.0468	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	0.6547	0.000607	0.2316	0.008529	-0.04677	0.001265	0.0009469	0.0006425	-0.6312
Use of non renewable primary energy (PENRE)	Input	MJ	7.075	0.05363	2.283	0.7528	0.001811	0.0884	0.01701	0.01266	-0.1289
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	2.707	0	0	0	0	0	-2.707	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	9.782	0.05363	2.283	0.7528	0.001811	0.0884	-2.69	0.01266	-0.1289
Use of secondary material (SM)	Input	kg	0.03674	0	0	0	0	0	0	0	0.0003329
Use of renewable secondary fuels (RSF)	Input	MJ	0.003923	0.00001187	0.0001115	0.0002753	9.886E-7	0.00004527	0.00002033	0.00001332	-0.000003025
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.001561	0.0001008	0.001342	0.001507	0.000004075	0.0001619	0	0.00002527	-0.03484
Use of net fresh water (FW)	Input	m3	0.005933	0.000005997	0.002156	0.00006549	8.542E-7	0.000009453	0.0001439	0.00001579	-0.0007857
Hazardous waste disposed (HWD)	Output	kg	0.002053	0.000004847	0.0003945	0.00003818	0	0.000004559	0	0.0001184	-0.00002843
Non hazardous waste dispose (NHWD)	Output	kg	0.0683	0.002575	0.02752	0.02372	0.008	0.004299	0	0.05423	-0.003789
Radioactive waste disposed (RWD)	Output	kg	0.00001762	3.52E-7	0.000001446	0.000005155	0	6.021E-7	0	8.369E-8	-5.36E-7
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.04121	0	0.007442	0	0.004963	0.000004688	-0.00001303
Materials for energy recovery (MER)	Output	kg	0	0	0.00775	0	1.089E-8	0	0.05227	1.147E-7	-0.000001715
Exported electrical energy (EEE)	Output	MJ	0	0	0.01176	0	0.0004576	0	0.0803	0.000007439	-0.000004203
Exported thermal energy (EET)	Output	MJ	0	0	0.178	0	0.006923	0	1.215	0.0001125	-0.00006359

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	9.763	0.05363	2.283	0.7527	0.00181	0.08839	0.01701	0.01266	-0.1289
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0002132	9.737E-8	7.002E-7	0.000001029	3.15E-9	1.615E-7	1.353E-8	4.181E-9	-0.000001176
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.004399	0.00001086	0.001358	0.0007966	6.128E-7	0.0000168	0.00002712	0.000004267	-0.0002597
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.007407	0.000001413	0.0000792	0.00001893	0.01358	0.00000242	0.000002688	5.346E-7	-0.00002106
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	0.7039	0.00363	0.2749	0.05323	0.0001294	0.005846	0.1237	0.006	-0.0103
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	0.6969	0.003633	0.275	0.05325	0.01371	0.00585	0.1238	0.006	-0.01056
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.0004334	0.000001327	0.00003333	0.00002626	4.28E-8	0.000002081	5.015E-7	1.274E-7	-0.0002462
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	0.7101	0.003633	0.2602	0.05325	0.0001295	0.00585	0.1237	0.006155	-0.01088
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.00003152	3.405E-8	0.000005642	3.461E-7	1.063E-9	4.671E-8	2.385E-8	5.903E-9	-0.000002045
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.0005635	0.000002138	0.0002785	0.0001914	2.027E-7	0.000003324	0.00001297	0.000007736	-0.00002906
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.006348	0.00002391	0.003067	0.002131	0.000002194	0.00003718	0.0001329	0.00001698	-0.0003498
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.002137	0.000008952	0.000796	0.0005773	6.307E-7	0.00001424	0.00003205	0.000006108	-0.0001003
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	3.974E-8	7.88E-10	2.356E-9	1.172E-8	2.7E-11	1.324E-9	2.72E-10	1.68E-10	-0.0005161
Water (user) deprivation potential (WDP)	m3 world eqv.	2.865	0.01749	0.2201	0.4842	0.002294	0.0855	0.1227	0.1175	-1.092

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.01633	0.0002229	0.00164	0.003257	0.000007746	0	0.0003863	0.00004278	0.00006226	-0.0006523
Potential incidence of disease due to PM emissions (PM)²	disease incidence	4.655E-8	2.33E-10	1.828E-8	1.94E-9	9E-12	0	3.58E-10	1.16E-10	8.4E-11	-4.089E-9
Potential Soil quality index (SQP)²	unitless	2.034	0.03675	0.4898	0.3688	0.001215	0	0.06183	0.003105	0.04664	-0.7009
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	3.265E-8	4.1E-11	2.923E-9	3.84E-10	3E-12	0	7.2E-11	3.26E-10	1E-11	-2.441E-9
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	8.33E-10	0	6.6E-11	0	0	0	0	5E-12	0	-4.4E-11
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	27.76	0.04348	6.857	0.517	0.002414	0	0.06552	0.2615	1.151	-2.424