Process information
| Key Data Set Information | |
| Location | DK |
| Geographical representativeness description | European market |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | This EPD covers the life cycle modules A1–A3 (raw material extraction, transport to factory, and production). Modules A4–A5 (transport to storage and further to market with subsequent consumption). B1-B7 (use phase) is not included. C1–C4 (end-of-life phase) and D (potential benefits from recycling) are included. The system boundaries are defined according to EN 15804+A2. |
| Technical purpose of product or process | X-plan is a cement-based, polymer- and fiber-reinforced repair and smoothing compound with fast-setting and dust-reduced properties, designed for use in both wet and dry areas. The product is suitable for leveling most types of subfloors, such as concrete, screed, lightweight concrete, gypsum substrates, wooden boards, and ceramic tiles. X-plan is supplied as a dry mix and is ready to use after being mixed with water. The compound is partially self-leveling and very easy to apply, ensuring a smooth workflow and an even surface. - Self-leveling, suitable for all types of substrates - For leveling concrete and wooden subfloors - Suitable for thin underfloor heating systems - Can be applied manually or pumped using a mixing machine - Dust-reduced - Layer thickness: 2–50 mm |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-10-07 - 2030-10-07 |
| Technological representativeness | |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-11-30T21:23:05 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 29e3ea0d-7707-4acf-a100-fad1493d427f |
| Date of last revision | 2025-10-03T13:20:09.7583277Z |
| Data set version | 00.02.001 |
| Registration authority | |
| Registration number | NEPD-12577-12695 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle