| Key Data Set Information | |
| Location | SE |
| Geographical representativeness description | Europe. |
| Reference year | 2025 |
| Name |
|
| Technical purpose of product or process | Dynamic and practical storage with a focus on flexibility and options to meet the unique needs of each room. All modules can be combined both horizontally and vertically. Create your own storage by combining practical wardrobes with shoe racks, benches, and personalized storage. Doors are available in multiple heights and can be chosen with different types of locks, handles, and knobs. Add open or low storage to create the right ambiance in the room. The modules are installed on plinths that come in three optional heights. Shape Open Storage is available in sizes of 2, 3, 4, 5, 6, 8, 9 or 12, in a variety of colors and veneers. Shape Open Storage can also be chosen in depths of 415 or 580 mm. More information about the product can be found here: https://www.edsbyn.com/products/shape/storage/ Office furniture, open storage unit - Shape Open Storage 12. Carcass and shelves in melamine faced chipboard with matching ABS edge strip. Shape Open Storage with 12 open compartments (3 width x 4 height) measures: Width 1213 mm, Depth 485 mm. Total Height varies depending on your choice of plinth: - 1536 mm without plinth - 1566 mm with plinth 30 mm - 1664 mm with plinth 128 mm - 1856 mm with plinth 320 mm. Other shapes, sizes and materials of the carcass are calculated in Variants. Plinths are calculated separately in Options. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-01-23 - 2030-01-23 |
| Technological representativeness | |
| Technology description including background system | Möbelfakta certified product. |
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-02-09T16:15:24 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 27b8bb3d-c7db-47d0-bcae-f53bc609130d |
| Date of last revision | 2025-01-20T07:51:17.7482789Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-8792-8446 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Indicators of life cycle