Process Data set: B-Bitz - Bob (en)

Process Data set: B-Bitz - Bob (en) en

Process information

Key Data Set Information
Reference year	2025
Name	B-Bitz - Bob
Use advice for data set	Fabric used in the calculation is Camira Oceanic, a 100% post-consumer recycled polyester A3 Data Collection (Production Phase) Data for the A3 module, encompassing the production phase, was collected in 2024. This data includes all relevant inputs and outputs associated with manufacturing processes. A4 Data Collection (Transport to Customer) Transport data for the A4 module was sourced from Trafa.se and reflects operations during the years 2021-2022. According to statistics from Trafikanalys, the average distance covered by a Swedish heavy-duty truck transporting furniture in domestic traffic was approximately 143 kilometers in 2022, with an average of 153 kilometers for the period 2012–2022. These values are based on representative industry conditions and account for the most recent data on logistics efficiency and route optimization. A5 Data (Packaging Disposal) For the A5 module, it is assumed that packaging materials are automatically handled and disposed of in alignment with standard waste management practices at this stage. This assumption aligns with typical end-of-life scenarios for packaging in regulated waste systems. Maintenance Data (B2 Module) Maintenance requirements are calculated based on typical cleaning scenarios over the product's lifespan, assumed to be 15 years: Vacuum cleaning: Energy consumption is calculated assuming a 900 W vacuum cleaner operating for 30 seconds per month over 15 years. Wet cleaning: Water consumption is estimated at 0.0005 m³ (equivalent to 0.5 liters) per cleaning session, with cleaning occurring once per month for 15 years.
Classification	Class name : Hierarchy level EPDNorge: Furniture / Soft seating
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Johanson Design AB
Quantitative reference
Reference flow(s)	B-Bitz - Bob - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 1.566203703829 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-12-14 - 2030-12-14
Publication date	2025-12-14
Technological representativeness

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 026:2022 Part B for Furniture

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 026:2022 Part B for Furniture

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-12736-12991_B-Bitz---Bob.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-12-14T16:21:07
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	223c03c7-0de6-4b55-b988-6c37aae71ade
Date of last revision	2025-10-24T09:15:38.6874174Z
Data set version	00.02.001
Registration authority	EPD Norway
Registration number	NEPD-12736-12991
Owner of data set	Johanson Design AB
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Production A1-A3	Transport A4	Maintenance B2	Repair B3	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	48.33	0.024	4.003	0.2354	0.01427	0.03914	0.002682	-32.32
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	22.71	0	0	0	0	-28.48	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	71.04	0.024	4.003	0.2354	0.01427	-28.44	0.002682	-32.32
Use of non renewable primary energy (PENRE)	Input	MJ	168.9	1.677	8.971	2.768	0.9966	1.293	0.04195	-5.233
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	52.98	0	0	0.7605	0	-52.98	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	221.9	1.677	8.971	3.528	0.9966	-51.69	0.04195	-5.233
Use of secondary material (SM)	Input	kg	1.025	0	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.2462	0.0008586	0.02207	0.008966	0.0005104	0.0009277	0.00006649	-0.005661
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.3767	0.00307	0.05734	0.002242	0.001825	0	0.01556	-1.916
Use of net fresh water (FW)	Input	m3	0.2275	0.0001793	0.09962	0.004094	0.0001066	0.004583	0.00003859	-0.03893
Hazardous waste disposed (HWD)	Output	kg	2.512	0.00008646	0.07552	0.0006295	0.0000514	0	0.05845	-0.0002459
Non hazardous waste dispose (NHWD)	Output	kg	1.366	0.08153	0.03285	0.07354	0.04846	0	0.04109	-0.1236
Radioactive waste disposed (RWD)	Output	kg	0.01046	0.00001142	0.0001238	0.000008862	0.000006788	0	2.367E-7	-0.00002739
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.1994	0	0.01586	0	0	0	0	0
Materials for energy recovery (MER)	Output	kg	0.4325	0	0.0358	0	0	4.747	0	0
Exported electrical energy (EEE)	Output	MJ	0.2835	0	0.00004385	0	0	4.077	0	0
Exported thermal energy (EET)	Output	MJ	4.288	0	0.0006634	0	0	61.68	0	0

Core environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Maintenance B2	Repair B3	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	194.1	1.676	8.952	2.767	0.9965	1.286	0.0419	-5.233
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.00009387	0.000003063	0.000003938	0.000003781	0.000001821	6.196E-7	2.498E-8	-0.00000364
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.05946	0.0003187	0.0007751	0.002087	0.0001894	0.002547	0.00001668	-0.003015
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-5.633	0.00004589	0.001788	0.0006421	0.00002728	6.405	0.000005359	-0.0007555
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	10.59	0.1109	0.1875	0.1596	0.06591	2.543	0.005006	-0.3659
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	4.988	0.111	0.1939	0.1603	0.06596	8.948	0.005012	-0.3793
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.03145	0.00003947	0.004553	0.000129	0.00002346	0.00002139	7.288E-7	-0.01261
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	10.72	0.111	0.1935	0.1603	0.06596	3.281	0.006568	-0.3738
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0009133	8.859E-7	0.000009251	0.000008077	5.266E-7	0.000001439	6.856E-8	-0.00003252
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.01275	0.00006305	0.000136	0.0001609	0.00003748	0.001369	0.000005127	-0.0009856
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.1335	0.0007053	0.001684	0.001684	0.0004192	0.0134	0.00005857	-0.01066
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.03767	0.0002702	0.0004418	0.0006267	0.0001606	0.003199	0.00001607	-0.002939
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	8.753E-7	2.512E-8	4.598E-8	1.601E-8	1.493E-8	1.558E-8	4.84E-10	-0.02666
Water (user) deprivation potential (WDP)	m3 world eqv.	2825	1.622	823.8	9.908	0.9639	3.782	0.4847	-65.16

Additional environmental impact indicators

Indicator	Unit	Production A1-A3	Transport A4	Installation A5	Maintenance B2	Repair B3	Replacement B4	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.102	0.007328	0	0.2799	0.008887	0	0	0.004356	0.002159	0.0002032	-0.03343
Potential incidence of disease due to PM emissions (PM)²	disease incidence	7.14E-7	6.788E-9	0	7.043E-9	9.106E-9	0	0	4.035E-9	1.228E-8	1.96E-10	-1.827E-7
Potential Soil quality index (SQP)²	unitless	217	1.173	0	4.014	0.9577	0	0	0.697	0.1571	0.1294	-34.99
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	1.261E-7	1.358E-9	0	5.534E-9	3.356E-9	0	0	8.07E-10	1.329E-8	1.6E-10	-2.729E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	2.651E-8	0	0	3.08E-10	4.26E-10	0	0	0	2.88E-10	4E-12	-5.2E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	363.5	1.243	0	6.605	3.78	0	0	0.7387	7.354	0.08455	-28.46