Process Data set: ÖLFLEX® SERVO 2YSLCYK-JB 3X2,5+3G0,5 BK (en) en
Process information
| Key Data Set Information | |
| Location | FR |
| Geographical representativeness description | Norway |
| Reference year | 2025 |
| Name |
|
| Technical purpose of product or process | ÖLFLEX SERVO 2YSLCYK-JB are double shielded low capacitance cables of flexible design, with PVC sheath and PE core insulation. They are suitable for frequency converters operated by three-phase current motors. They are also suitable for use in dry, damp or wet areas. They are largely resistant to acids, alkalis and certain oils at room temperature. They are suitable for occasional, non-automated movements. The maximum tensile load is 15 N/mm² of conductor cross-section during installation and operation. Compulsory guidance is not permitted. The earthing concept for this version with the protective conductor splitted in thirds is composed of the defined cross-sections of the protective conductors and the screening braid. This design avoids all cable-relevant parts from high frequency discharge currents, which may damage motor bearings especially at high frequencies and long cable lengths. This design also improves EMC noise situation of the whole drive system. Additionally, due to the design the frequency converter system is burdened with lower capacitive reactive power compared to PVC insulated cables. Application range: Connection cable between frequency converter and motor, paper industry, chemical industry, heavy industry. Design based on DIN VDE 0276-603 / HD 603 S1 + A3 DIN 57250-1 resp. VDE 0250-1 Certification EN 13501-6 and EN 50575 Classification of fire behaviour (article/dimension range see www.lappkabel.com/cpr) Conductor fine wire strands of bare copper, acc. to IEC 60228 resp. EN 60228, class 5 Insulation PE compound acc. to EN 50290-2-23, table 1, column L/MD Core identification code acc. to VDE 0293-308 resp. HD 308 S2 Stranding 3+3 cores twisted concentrically, protective conductor divided into three positioned in the gusset Screen double screening with aluminium-coated plastic foil (metal-side outwards) and braid of tinned copper wires, braid coverage min. 70% (nominal value) Outer sheath PVC sheath, acc. to EN 50363-4-1, UV resistant, cold flexible, outdoor use colour: black, similar RAL 9005 |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-07-31 - 2030-07-31 |
| Technological representativeness | |
| Technology description including background system | Electrical properties at 20 °C Specific volume resistivity > 20 G O x cm Transfer impedance max. 250 mO/m (at 30 MHz) Nominal voltage 600/1000 V Test voltage C/C: 4000 V C/S: 4000 V Mechanical and thermal properties Minimum bending radius occasional flexing: 15 x outer diameter fixed installation: 4 x outer diameter Temperature range occasional flexing: -15 °C up to +70 °C max. conductor temperature fixed installation: -40 °C up to +70 °C max. conductor temperature Flammability flame retardant acc. to IEC 60332-1-2 resp. EN 60332-1-2 UV resistance acc. to EN 50525-1 cable with black sheath are suitable for permanent outdoor use. Tests acc. to IEC 60811 resp. EN 60811, VDE 0472, EN 50395, EN 50396 General requirements These cables are conform to the EU-Directive 2014/35 EU (Low Voltage Directive). A part of these cables (see www.lappkabel.com/cpr) are classified in accordance with the EU-Regulation no. 305/2011 (CPR). Environmental information These cables meet the substance-specific requirements of the EU Directive 2011/65/EU (RoHS). |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-08-26T21:05:34 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 21d4cf6b-45bd-45fc-841d-c8703742afc0 |
| Date of last revision | 2025-07-30T07:26:04.2911128Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-11930-11886 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle