Process Data set: LAPP ÖLFLEX SOLAR H1 BUR 6mm2 El.nr: 1036100 and 1036101 (en) en
Process information
| Key Data Set Information | |
| Location | FR |
| Geographical representativeness description | Norway |
| Reference year | 2024 |
| Name |
|
| Use advice for data set | 1m LAPP ÖLFLEX SOLAR H1 BUR 6mm2 El.nr: 1036100 and 1036101 |
| Technical purpose of product or process | ÖLFLEX SOLAR H1 BUR cables are weather- and UV-resistant photovoltaic cables. These cross-linked, halogen-free and double-insulated solar cables are suitable for permanent outdoor use and especially for the interconnection of grounded and ungrounded photovoltaic power systems. They are applicable for the connection of solar panels among themselves and as extension cable between the individual module strings or the DC/AC inverter. Recommended use of cables for PV systems acc. to IEC 62930 and EN 50618: Intended for use in PV installations e.g. acc. to IEC 60364-7-712 resp. HD 60364-7-712. They are intended for permanent use outdoor and indoor, for free movable, free hanging and fixed installation. It is also permitted to install the cables in conduit or trunking systems. CPR classification: Dca-s2,d2,a1 Product Make-up Conductor: Fine wire strands of tinned copper acc. to IEC 60228 resp. EN IEC 60228, class 5 Core insulation: Cross-linked polyolefin co-polymer acc. to IEC 62930 and EN 50618, halogen free Colour: White Outer sheath: cross-linked polyolefin co-polymer acc. to IEC 62930 and EN 50618, halogen free Colour: black or blue or red |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | 2024-11-22 - 2029-11-22 |
| Technological representativeness | |
| Technology description including background system | Mechanical and thermal properties Minimum ambient temperature fixed installation -40 °C Conductor temperature, fixed installation up to +90 °C maximum conductor temperature during normal continuous operation acc. to IEC 62930 and EN 50618, up to +120 °C (maximum conductor temperature limited to 20.000 hours acc. to IEC 60216-2) acc. to IEC 62930 and EN 50618 Minimum temperature, during installation and handling -25 °C acc. to IEC 62930 and EN 50618 Max. storage temperature +45 °C acc. to IEC 62930, +40 °C acc. to EN 50618 Max. short circuit temperature +250 °C (5s) acc. to IEC 62930 and EN 50618 Minimum bending radius, occasional flexing:15 x outer diameter Minimum bending radius, stationary use 4 x outer diameter for outer diameter = 8 mm 5 x outer diameter for outer diameter > 8 mm Weather/UV resistance acc. to IEC 62930, Appendix E and EN 50618, Appendix E Ozone resistance acc. to IEC 62930 and EN 50618 Halogen-free acc. to IEC 62930 and EN 50618 acc. to IEC 60754-1 resp. EN 60754-1 and IEC 60754-2 resp. EN 60754-2 Smoke density acc. to IEC 62930 and EN 50618 acc. to IEC 61034-2 resp. EN 61034-2 Flammability flame retardant acc. to IEC 60332-1-2 resp. EN 60332-1-2 Acid and alkali resistance acc. to IEC 62930 and EN 50618 acc. to IEC 60811-404 resp. EN 60811-404 (oxalic acid and sodium hydroxide solution) Underground use acc. to UL 854, Section 23 (Impact Resistance Test) acc. to UL 854, Section 24 (Crushing Resistance Test) Presence of water Permanent submersion AD8 acc. to IEC 62440 and IEC 60364-5-51, tested acc. to EN-50525-2-21, appendix D and E General requirements These cables are conform to the EU Directive 2014/35/EU (Low Voltage Directive) A part of these cables (see www.lappkabel.com/cpr) are classified acc. to the EU-Regulation no. 305/2011 (CPR). Environmental information These cables meet the substance-specific requirements of the EU Directive 2011/65/EU (RoHS) |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-01-21T21:11:41 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 1f2693f3-c4f3-4e92-85ad-8e5d45355a66 |
| Date of last revision | 2024-11-21T12:20:03.8584704Z |
| Data set version | 00.06.000 |
| Registration authority | |
| Registration number | NEPD-8214-7887 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle