soda4LCA

Process Data set: 360 AXAL-TT 6/10(12) kV 3x400/50AL PRO 3.0 (en) en

Process information

Key Data Set Information
Location	SE
Geographical representativeness description	North Europe
Reference year	2024
Name	360 AXAL-TT 6/10(12) kV 3x400/50AL PRO 3.0
Technical purpose of product or process	Three-core cable for fixed installation in soil, fresh water and pipes. Extra durable multilayer sheath. User-friendy at low temperatures. Made of material for easy recycling. 1. Aluminium, compacted stranded, longitudinally watertight. Made with renewable energy. 2. Extruded, semi conducting conductor screen. Bio-circular polyethylene, based on non-fossil feedstock. 3. XPLE, dry vulcanized, peroxide crosslinked, nominal thickness 3,4mm. Bio-circular polyethylene, based on non-fossil feedstock. 4. Extruded, easy strip semiconducting insulation screen. 5. Three aluminum wires embedded in conductive corrosion resistant material. Aluminum wires in electrical contact with the aluminum foil that provides a full screen protection. The conductive corrosion resistant material is made with bio-circular polyethylene, based on non-fossil feedstock. 6. Swelling tape and swelling yarn makes the cable longitudinally water tight. 7. Aluminum foil glued to the sheath. 8. Black PE composite constructed with a hard outer layer and a shock absorbing inner layer. Meter marked. Equipped with a rip cord for easier opening. Bio-circular polyethylene, based on non-fossil feedstock.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electrical cables and wires
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	NKT headquarter Denmark A/S
Quantitative reference
Reference flow(s)	360 AXAL-TT 6/10(12) kV 3x400/50AL PRO 3.0 - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-02-19" - "2029-02-19"
Publication date	02-19-2024
Technological representativeness
Technology description including background system	Norm (standard): SS 424 14 16 Rated voltage: 6/10(12)kV Test voltage: 30kV Maximal short-circuit temperature: 250°C Operating cond. temperature max.: 90 °C Min. temperature for laying and manipulation: -20°C Minimum bending radius: 8D CPR class: Fca according to SS-EN-50575 RoHS: Yes REACH: Yes CE Conformity: No

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

NEPD-6121-5388_360-AXAL-TT-6-10-12--kV-3x400-50AL-PRO-30.pdf

Original EPDs

NEPD-6121-5388_360-AXAL-TT-6-10-12--kV-3x400-50AL-PRO-30.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-11-19T18:09:47
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	1826a06e-b528-4555-b247-6f7ad3606531
Date of last revision	2024-02-16T06:39:06.5406207Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-6121-5388-EN
Owner of data set	NKT headquarter Denmark A/S
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	265.5	0.1163	16.75	0.1251	5.653	0.2951	0.0536	0.005843	0.05507	-104.5
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	265.5	0.1163	16.75	0.1251	5.653	0.2951	0.0536	0.005842	0.05507	-104.5
Use of non renewable primary energy (PENRE)	Input	MJ	309.8	9.706	30.87	8.737	7.272	0.3048	3.744	0.1891	0.5469	-252.3
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	82.02	0	0	0	0.07812	0	0	-78.12	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	391.8	9.706	31.88	8.737	7.37	0.3048	3.744	-77.93	0.5469	-252.3
Use of secondary material (SM)	Input	kg	0.02985	0	0	0	0.0006943	0	0	0	0.004866	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.2078	0.003972	0.05721	0.004474	0.005533	0.002981	0.001917	0.0001606	0.001146	-0.03942
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.0327	0.01291	-0.08431	0.016	-0.0002453	0	0.006856	0	0.00358	-0.695
Use of net fresh water (FW)	Input	m3	1.985	0.0008722	0.04048	0.0009343	0.04057	0.001343	0.0004004	0.000595	0.0006969	-0.5113
Hazardous waste disposed (HWD)	Output	kg	0.1147	0.0004696	0.1257	0.0004506	0.006086	0.00002812	0.0001931	0	0.06275	0.08279
Non hazardous waste dispose (NHWD)	Output	kg	9.414	0.3403	0.2667	0.4249	0.251	0.001863	0.1821	0	1.92	-5.768
Radioactive waste disposed (RWD)	Output	kg	0.001106	0.00006658	0.0004544	0.00005951	0.00003432	0.000003144	0.00002551	0	0.000003721	-0.001034
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.005496	0	0.04463	0	0	2.226	0.00009292	0
Materials for energy recovery (MER)	Output	kg	0	0	0.5052	0	0.02884	0	0	0.9368	0.0001225	0
Exported electrical energy (EEE)	Output	MJ	0	0	0.2965	0	0.04202	0	0	1.803	0.001203	0
Exported thermal energy (EET)	Output	MJ	0	0	4.485	0	0.6357	0	0	27.28	0.0182	0

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	386.8	9.706	30.8	8.736	8.811	0.3001	3.744	0.1891	0.5469	-252.3
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0003182	0.00001406	0.000002956	0.00001596	0.000007166	1.727E-7	0.00000684	1.04E-7	1.847E-7	0.00002865
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1582	0.008534	0.00179	0.001661	0.003428	0.00005122	0.0007117	0.0003585	0.000185	-0.1345
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.3122	0.0002458	0.1006	0.0002391	0.008269	0.000203	0.0001025	0.00002375	0.00001047	-0.09071
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	26.18	0.6761	0.5815	0.5778	0.6237	0.01111	0.2476	2.804	0.1224	-19.82
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	26.5	0.6767	0.8403	0.5782	0.6355	0.01192	0.2478	2.805	0.1225	-20.29
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.01699	0.0003013	0.1582	0.0002057	0.003516	0.0006085	0.00008814	0.000003555	0.000007685	-0.379
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	26.34	0.6766	0.8162	0.5782	0.6318	0.01615	0.2478	2.804	0.1254	-19.37
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0003934	0.000004485	0.00001577	0.000004616	0.000008417	7.347E-7	0.000001978	2.241E-7	3.684E-7	-0.0007745
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.02041	0.002056	0.0006228	0.0003286	0.0004781	0.000008093	0.0001408	0.0001721	0.0001773	-0.01723
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.2203	0.02287	0.006281	0.003675	0.005145	0.0001087	0.001575	0.001857	0.0007394	-0.1895
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.08928	0.006276	0.00157	0.001408	0.001996	0.00002546	0.0006034	0.0004447	0.0002324	-0.06363
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000003101	1.48E-7	1.387E-7	1.309E-7	7.168E-8	1.202E-9	5.609E-8	2.26E-9	6.938E-9	-0.01152
Water (user) deprivation potential (WDP)	m3 world eqv.	3862	7.199	4717	8.45	172.2	23.2	3.621	0.4818	10.17	-1.13E+4

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.063	0.04222	1.023	0.03818	0.04374	0	0	0	0	0	0.006844	0	0	0.01636	0.0003286	0.003233	-1.102
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002031	3.36E-8	2.896E-8	3.537E-8	4.298E-8	0	0	0	0	0	2.71E-10	0	0	1.516E-8	1.412E-9	3.38E-9	-0.000001453
Potential Soil quality index (SQP)²	unitless	77.02	5.166	12.43	6.111	2.096	0	0	0	0	0	0.2261	0	0	2.619	0.02361	1.406	-17.26
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000001219	7.488E-9	8.821E-9	7.075E-9	2.497E-8	0	0	0	0	0	2.31E-10	0	0	3.032E-9	2.491E-9	6.93E-10	-5.919E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	9.198E-8	0	3.88E-10	0	1.849E-9	0	0	0	0	0	9E-12	0	0	0	6.6E-11	3.1E-11	-5.002E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	536.2	6.711	13.4	6.476	23.14	0	0	0	0	0	0.3757	0	0	2.775	0.6985	590.8	-309.2