Process Data set: Tysnes 66 Connect Wireless 1500 (en)

Process Data set: Tysnes 66 Connect Wireless 1500 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Tysnes 66 Connect Wireless 1500
Technical purpose of product or process	Version of Tysnes with integrated Connect Wireless driver. Tysnes Connect must be used in combination with other SG Connect sensor products or Connect Switch. When motion is detected, the light is switched on, and after a defined period the light is switched off, thus contributing to energy savings. Connect also has the option of using a daylight sensor. If this function is activated, the sensor will constantly strive to provide the desired amount of light in its working area. The lighting control is easily configured using the SG Connect Commissioning App and the various units communicate wirelessly with each other via Zigbee. System Wattage: 32.0 W. Luminous flux: 5560 lm. Efficacy:174 lm/W. Colour temperature: 4000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000, L90>50,000. Light distribution: Direct. Control/Dimming: Connect. Luminiare class: Class II. Housing: UV-stabilized polycarbonate. Optics: UV-stabilized polycarbonate. Height: 80.0mm. Length: 1500.0 mm. Width: 85.0 mm. EAN: 7021981200565 Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Tysnes 66 Connect Wireless 1500 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.469670060931 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-02-24 - 2030-02-24
Publication date	2025-02-24
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/tysnes-66-connect/120056/pdf/specification_120056.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/703250_Tysnes%2066%20Connect/50/703250_Tysnes%2066%20Connect.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-9227-8811_Tysnes-66-Connect-Wireless-1500.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-03-22T14:32:52
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	1761d34c-0e79-49be-8b45-de8f4c77d37a
Date of last revision	2025-02-20T16:14:30.9509934Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-9227-8811
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	33.86	0.05996	0.6812	0.1918	0.003779	1.037E+4	0.02299	0.1019	0.06896	-8.058
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	6.236	0	0	0	-6.051	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	40.1	0.05996	0.6812	0.1918	-6.047	1.037E+4	0.02299	0.1019	0.06896	-8.058
Use of non renewable primary energy (PENRE)	Input	MJ	216.5	5.298	8.374	16.89	0.2295	801.9	2.031	0.8275	0.3209	-15.31
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	26.44	0	0	0	0	0	0	-27.66	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	243	5.298	8.374	16.89	0.2295	801.9	2.031	-26.83	0.3209	-15.31
Use of secondary material (SM)	Input	kg	1.434	0	0	0	0	0	0	0	0.001529	0.01765
Use of renewable secondary fuels (RSF)	Input	MJ	0.1206	0.001173	0.000377	0.006197	0.0001253	8.145	0.0004496	0.001773	0.0003433	0.01103
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.7735	0.009958	0.004111	0.03377	0.0005167	20.29	0.003817	-0.00005285	0.01347	-0.07942
Use of net fresh water (FW)	Input	m3	0.1876	0.0005924	0.005222	0.001473	0.0001083	77.46	0.0002271	0.00187	0.0002843	-0.01833
Hazardous waste disposed (HWD)	Output	kg	0.7209	0.0004788	0.0006978	0.0008572	0	0.5142	0.0001835	0.00002666	0.07555	-0.005435
Non hazardous waste dispose (NHWD)	Output	kg	17.29	0.2543	0.08711	0.5353	1.014	61.69	0.09749	0.03666	0.6265	-0.3213
Radioactive waste disposed (RWD)	Output	kg	0.0004927	0.00003477	0.00001627	0.0001156	0	0.00717	0.00001333	0.000001366	0.000001036	-0.0000412
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.04303	0	0.9434	0	0	0.3999	0.00004599	-0.0006907
Materials for energy recovery (MER)	Output	kg	0	0	0.004055	0	0.000994	0	0	0.5134	0.000001125	-0.00009094
Exported electrical energy (EEE)	Output	MJ	0	0	0.00623	0	0.05801	0	0	0.7883	0.00007297	-0.0002228
Exported thermal energy (EET)	Output	MJ	0	0	0.09426	0	0.8776	0	0	11.93	0.001104	-0.003371

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	242.9	5.298	8.374	16.88	0.2295	800.7	2.031	0.8273	0.3207	-15.31
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.004657	0.000009619	0.000002149	0.00002317	3.993E-7	0.004374	0.000003687	5.802E-7	1.382E-7	-0.00135
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.2684	0.001073	0.00472	0.01771	0.00007769	0.4583	0.0004112	0.0005291	0.0001228	-0.06819
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-1.597	0.0001396	0.000143	0.0004251	1.72	1.622	0.00005353	0.001104	0.0004729	-0.003053
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	19.48	0.3586	0.9216	1.193	0.01641	58.66	0.1375	1.28	0.07529	-1.287
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	17.91	0.3588	0.9218	1.194	1.736	60.52	0.1376	1.281	0.0759	-1.294
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.02893	0.0001311	0.0001004	0.0005869	0.000005426	0.242	0.00005026	0.0001532	0.0001352	-0.003997
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	19.63	0.3588	0.8784	1.194	0.01641	60.4	0.1376	1.281	0.07769	-1.405
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.002024	0.000003364	0.00001671	0.000007779	1.347E-7	0.004219	0.000001289	0.000002446	7.582E-7	-0.000406
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.0232	0.0002112	0.0011	0.004254	0.0000257	0.05038	0.00008096	0.0001744	0.00009457	-0.003744
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.3109	0.002362	0.01212	0.04737	0.0002782	0.6557	0.0009053	0.001837	0.0003607	-0.05078
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.08939	0.0008843	0.00457	0.01284	0.00007996	0.1763	0.000339	0.0004644	0.0001467	-0.01492
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.0000039	7.798E-8	3.389E-8	2.628E-7	3.464E-9	0.000004022	2.989E-8	6.489E-9	2.816E-9	-0.005407
Water (user) deprivation potential (WDP)	m3 world eqv.	191.7	1.728	0.7818	10.91	0.2909	3122	0.6623	7.097	2.07	-20.32

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.9267	0.02202	0.01209	0.07306	0.000982	14.53	0	0.008441	0.003772	0.001061	-0.04795
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001403	2.318E-8	5.536E-8	4.379E-8	1.146E-9	0.000003286	0	8.887E-9	2.99E-9	2.303E-9	-1.922E-7
Potential Soil quality index (SQP)²	unitless	75.02	3.63	1.629	8.312	0.154	403.3	0	1.392	0.1821	0.9326	-16.86
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000001134	4.217E-9	4.021E-8	8.672E-9	3.84E-10	0.000004102	0	1.616E-9	5.743E-8	6.18E-10	-2.384E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	3.247E-8	0	2.55E-10	0	9E-12	1.741E-7	0	0	9.9E-10	7.2E-11	-4.894E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1912	4.295	20.85	11.61	0.3061	3648	0	1.646	3.712	68.97	-518.4