| Key Data Set Information | |
| Location | NO |
| Geographical representativeness description | Europe |
| Reference year | 2025 |
| Name |
|
| Technical purpose of product or process | amina C is intended for charging electrically powered vehicles. It is classified as a mode-3 EVSE that can be used by ordinary persons. The product must be securely mounted on a sturdy surface. It may only be operated within the approved operating parameters and under specified environmental conditions. amina C is the reliable, future-proof charger offering seamless connectivity and maximum efficiency. With its premium LTE modem and automated setup, it ensures stable connections, improved security, and lowers the total cost of ownership throughout its lifecycle. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-07-09 - 2030-07-09 |
| Technological representativeness | |
| Technology description including background system | Dimensions 264mm x 112mm x 89mm Weight 1,1 kg w/o cable 2,5 kg w/ 6m 3-phase 20A cable 3,5 kg w/ 6m 3-phase 32A cable Operating temperature -30°C to +40°C Electrical rating Class I equipment Overvoltage category III (4 kV) 3x 230/400V 50Hz AC 20A (AST/ACT 1xx/20) 32A (AST/ACT 1xx/32) Charging cable Fixed cable included (replaceable) Type 2 plug (EN 62196) AST/ACT 100/20: 6m 3-phase 20A AST/ACT 100/32: 6m 3-phase 32A Charging power 20A variant 3-phase output: 3,7 – 13,8 kW 1-phase output: 1,4 – 4,6 kW Charging power 32A variant 3-phase output: 3,7 – 22,0 kW 1-phase output: 1,4 – 7,4 kW Integrated energy-meter 1 or 3-phase ±3 % accuracy Communications interface Bluetooth LE and Zigbee Frequency band: 2400 – 2483,5 MHz Maximum output power: 10mW 4G - LTE Cat 1 bis WiFi - 2.4 GHz & 5 GHz - IEEE 802.11a/b/g/n/ac/ax RFID Mifare & FeliCa ISO/IEC 14443 A/B Installation environment Indoor and outdoor use (IP54) Private and public locations (IK08) Wall or pole mounted Min 90cm installation height Installation Permanently connected Three-phase w/ neutral (TN/TT) Single-phase (TN/TT/IT) 4 – 16mm cable diameter Power supply terminals Single core or stranded wires 1,5 – 6mm² w/ ferrules 1,5 – 10mm² w/o ferrules Strip wires 12 – 14mm Integrated RCD RDC-DD (6mA DC) Required external protective devices Circuit breaker (max 40A) RCD (max 30mA AC) Frequency utilization 13.56 MHz: < 42dBuA/m 2400 – 2483,5 MHz: <20dBm 5150 – 5250 MHz: <23dBm 5250 – 5350 MHz: <20dBm 5470 – 5725 MHz: <27dBm 5725 – 5850 MHz: <14dBm LTE bands B1/3/7/8/20/28: < 23 dBm OCPP Local OCPP 1.6j with enhanced security Hardware ready for OCPP 2.0.1 Security features Hardware Security and cryptography module TLS 1.3 Regulations and standards RED 2014/53/EU EN IEC 62311:2020 EN IEC 61851-1:2019 EN 62196-1:2014 EN 62196-2:2012+A11:2013+A12:2014 IEC 62955:2018 EN IEC 61851-21-2:2021 EN 301 489-1 v2.2.3 EN 301 489-17 v3.2.4 EN 300 328 v2.2.2 RoHS 2011/65/EU EN IEC 63000:2018 |
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-09-25T18:15:23 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | 12168916-6a66-4016-96b1-acc776b0799e |
| Date of last revision | 2025-07-08T13:22:07.6744912Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-11731-11703 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Indicators of life cycle