Process Data set: JACKOBOARD® LIGNIN 20 mm (en)

Process Data set: JACKOBOARD® LIGNIN 20 mm (en) en

Process information

Key Data Set Information
Location	DE
Geographical representativeness description	Europe
Reference year	2025
Name	JACKOBOARD® LIGNIN 20 mm
Technical purpose of product or process	JACKOBOARD® LIGNIN construction boards are made of extruded polymer rigid foam (JACKODUR® LIGNIN), with a coating of special mortar and glass fibre fabric on both sides. JACKODUR® LIGNIN is an extruded polymer foam (with lignin and rPS) produced on the basis EN 13164 and available in board shape with a density 36 kg/m3 in average (measured). Lignin is a biopolymer and is abundantly produced as a byproduct of the paper industry during the breakdown of cellulose. rPS is made from post-consumer waste. The calculated density of the construction board, including the coating, is 186 kg/m³. The surface weight of the 20 mm plate is 3,78 kg/m2. The construction boards are supplied with smooth edges. Use of the product is subject to the relevant national regulations in the country of installation. In Germany, for example, this includes the building regulations of the individual federal states and the technical regulations derived from them.
Classification	Class name : Hierarchy level EPDNorge: Construction / Insulation
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804+A2. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. < 0,5%
Copyright	Yes
Owner of data set	BEWI ASA, Insulation and Construction
Quantitative reference
Reference flow(s)	JACKOBOARD® LIGNIN 20 mm - 1.0 * 1.0 qm (Area)
Biogenic carbon content	Carbon content (biogenic): 0.060597698806 kg Carbon content (biogenic) - packaging: 0.224071833514 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-04-22 - 2030-04-22
Publication date	2025-04-22
Technological representativeness

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 012:2022 Part B for Thermal insulation products

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 012:2022 Part B for Thermal insulation products

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-9801-9743_JACKOBOARD---LIGNIN-20-mm.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Elisabet Amat

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-05-06T08:47:16
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	10b41856-0022-4c58-be9e-3995c6fd8bbc
Date of last revision	2025-04-15T17:44:58.4070149Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-9801-9743
Owner of data set	BEWI ASA, Insulation and Construction
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	7.258	0.07176	1.109	0.07659	0.003612	0.0009066	0.03763	0.02447	-11.58
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	9.93	0	0	0	0	0	-2.407	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	17.19	0.07176	1.109	0.07659	0.003612	0.0009066	-2.369	0.02447	-11.58
Use of non renewable primary energy (PENRE)	Input	MJ	11.96	5.013	2.01	5.351	0.175	0.1664	0.1824	0.683	-7.411
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	0.4672	0	0	0	0	0	0	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	12.43	5.013	2.01	5.351	0.175	0.1664	0.1824	0.683	-7.411
Use of secondary material (SM)	Input	kg	0.4284	0	0	0	0	0	0	0	0
Use of renewable secondary fuels (RSF)	Input	MJ	0.0283	0.002567	0.0005468	0.00274	0.0001051	0	0.00009284	0.0005081	-0.001383
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.004184	0.009179	0.0004711	0.009797	0.001176	0	0	0.001287	-0.7451
Use of net fresh water (FW)	Input	m3	0.008058	0.0005361	0.001004	0.0005722	0.0001267	0.000008566	0.0004414	0.0008401	-0.0116
Hazardous waste disposed (HWD)	Output	kg	0.005533	0.0002585	0.0001971	0.0002759	0	0.000004899	0.000006657	0.001527	-0.0001413
Non hazardous waste dispose (NHWD)	Output	kg	0.1366	0.2438	0.01018	0.2602	0.553	0.0001971	0.0002103	3.023	-0.04462
Radioactive waste disposed (RWD)	Output	kg	0.00004296	0.00003415	0.000001521	0.00003645	0	0.000001156	7.047E-7	5.048E-9	-0.000009989
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.0108	0	0.005628	0	3.088	0	0
Materials for energy recovery (MER)	Output	kg	0	0	0.002519	0	0.5419	0	0.5922	0	0
Exported electrical energy (EEE)	Output	MJ	0	0	0.003758	0	0.3769	0	1.044	0	0
Exported thermal energy (EET)	Output	MJ	0	0	0.05686	0	5.702	0	15.79	0	0

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	12.43	5.013	2.009	5.35	0.175	0.1664	0.1823	0.6829	-7.411
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.00002492	0.000009158	0.000001089	0.000009775	2.412E-7	1.855E-8	8.555E-8	2.238E-7	-0.000001023
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.006325	0.0009528	0.0001617	0.001017	0.0001183	0.0001265	0.0002419	0.0002208	-0.001975
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-1.041	0.0001372	0.0000595	0.0001465	0.00007103	0.000002267	0.00003155	0.00002899	-0.001755
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	1.133	0.3315	0.1326	0.3539	0.01546	0.01209	1.891	0.02488	-0.3829
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	0.09336	0.3318	0.1327	0.3541	0.01553	0.01209	1.891	0.02492	-0.3896
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.001431	0.000118	0.00001472	0.000126	0.000003807	9.531E-7	0.000005032	0.000006107	-0.004891
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	0.5607	0.3318	0.1302	0.3541	0.01546	0.01209	1.89	0.02489	-0.3873
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.00003288	0.000002649	7.212E-7	0.000002827	1.766E-7	4.402E-8	2.692E-7	2.822E-7	-0.00001656
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.001383	0.0001885	0.00003763	0.0002012	0.00005131	0.00005584	0.0001131	0.00008203	-0.0005068
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.0156	0.002109	0.0004125	0.002251	0.0005428	0.0006044	0.001215	0.0009052	-0.005461
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.004791	0.0008078	0.0001417	0.0008622	0.0001398	0.0001684	0.0002928	0.0002591	-0.001866
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	7.854E-8	7.51E-8	1.751E-8	8.016E-8	2.382E-9	2.611E-9	1.777E-9	9.393E-9	-0.0104
Water (user) deprivation potential (WDP)	m3 world eqv.	139.4	4.848	0.6442	5.175	0.2765	0.03536	7.612	4.216	-11.49

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.04799	0.02191	0.001151	0.02339	0.0006375	0.0007253	0	0.001312	0.003118	-0.01159
Potential incidence of disease due to PM emissions (PM)²	disease incidence	6.432E-8	2.03E-8	9.65E-10	2.166E-8	1.453E-9	1.531E-8	0	1.224E-9	4.709E-9	-7.88E-8
Potential Soil quality index (SQP)²	unitless	104.4	3.506	0.2453	3.743	0.1024	0.02022	0	0.05146	2.629	-13.61
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	2.38E-8	4.062E-9	6.83E-10	4.333E-9	1.045E-9	8.5E-11	0	3.179E-9	2.72E-10	-1.07E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	8.6E-10	0	4E-11	0	2.2E-11	3E-12	0	8.2E-11	1.5E-11	-2.35E-10
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	16.17	3.716	0.5208	3.966	0.1986	0.09096	0	0.3263	0.3737	-11.69