Process Data set: IFXI LX NH 90 3G2,5 Antitwin (en)

Process Data set: IFXI LX NH 90 3G2,5 Antitwin (en) en

Process information

Key Data Set Information
Location	NO
Geographical representativeness description	Nordic
Reference year	2025
Name	IFXI LX NH 90 3G2,5 Antitwin
Use advice for data set	Cradle to Gate. The following stages have been declared: A1-A4
Technical purpose of product or process	IFX LX 90 building wire to be used for indoor installations, non protected, installed in trunk or pipe on wall, sealing or in deck. Outdoor installed - mechanical protection is required. Current rating shall be based on maximum 70° ambient temperature. Packaging solution result in a "Non spinning" outlook. General: Factory Standard
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Data from material supplier and the LCA generator has been accepted "As-Is" Data from processing TECCON in-house has been repeated ongoingly without major deviations. Figures given in document are worst case values. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. The allocation is made in accordance with the guidelines given in EN 15804. Raw material - Information derived from manufactory and from a LCA generator Processing: Derived from actual measurements during production of the individual units/stages Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. All major materials have been included. Substance representing <1% have not been included. This include folio film for packaging!
Copyright	Yes
Owner of data set	TECCON Norge AS
Quantitative reference
Reference flow(s)	IFXI LX NH 90 3G2,5 Antitwin - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.007110091738 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-04-10 - 2030-04-10
Publication date	2025-04-10
Technological representativeness
Technology description including background system	Construction standards Factory Standard Conductor Rigid bare copper EN60228 class 1 Insulation - conductor XLPE Conductor marking Colored acc. Cenelec Conductor laying Twisted Bedding PVC Jacket PVC - lead free White Marking PFXP LX 500V + Meter marking Voltage - nominal Uo/U 300/500V Voltage - test 2000V Max Conductor temperature operation 90° Max temperature at Short circuit 5s max 250° Resistance insulation 1000M?*Km Resistant to fire performance EN 50265-2-1; EN 60332-1-2 CPR EN 50575 compliance Eca DoP DOP-0015/20 Temperature - operation -30 to + 70oC Temperature - installation -5 to + 700C Bending radius 5 x D

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-9728-9651_IFXI-LX-NH-90-3G2-5-Antitwin.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-05-19T10:41:39
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	04d9966a-7387-4df4-87dc-83c44d8d919e
Date of last revision	2025-04-09T11:53:25.3195945Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-9728-9651
Owner of data set	TECCON Norge AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	1.039	0.0236	0.1457	0.006148	0.03264	0.0008402	0.002196	-12.41
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.4238	0	0	0	-0.4153	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	1.462	0.0236	0.1457	0.006148	-0.3827	0.00084	0.002196	-12.41
Use of non renewable primary energy (PENRE)	Input	MJ	9.485	1.649	1.019	0.4295	0.636	0.02858	0.02551	-3.277
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	4.183	0	0	0	0.004101	-4.101	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	13.67	1.649	1.019	0.4295	0.6401	-4.072	0.02551	-3.277
Use of secondary material (SM)	Input	kg	0.0146	0	0	0	0.0003168	0	0.00003086	0.04631
Use of renewable secondary fuels (RSF)	Input	MJ	0.01846	0.0008442	0.002311	0.0002199	0.0006796	0.00002368	0.00004655	0.001931
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.01258	0.003019	0.001459	0.0007864	0.001359	0	0.0008803	-0.6556
Use of net fresh water (FW)	Input	m3	0.0125	0.0001763	0.0004046	0.00004593	0.0005645	0.00008072	0.00003109	-0.02221
Hazardous waste disposed (HWD)	Output	kg	0.00624	0.00008502	0.0005333	0.00002215	0.003239	0	0.008359	-0.00191
Non hazardous waste dispose (NHWD)	Output	kg	0.164	0.08017	0.06517	0.02089	0.05906	0	0.08364	-0.123
Radioactive waste disposed (RWD)	Output	kg	0.0000203	0.00001123	0.000007172	0.000002925	0.000003265	0	1.699E-7	-0.00001153
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.1408	0	1.343	0.0927	0.000004388	-0.001812
Materials for energy recovery (MER)	Output	kg	0	0	0.01756	0	0.003989	0.1448	8.865E-7	-0.0002386
Exported electrical energy (EEE)	Output	MJ	0	0	0.02699	0	0.1756	0.2809	0.0000138	-0.0005847
Exported thermal energy (EET)	Output	MJ	0	0	0.4083	0	2.657	4.249	0.0002088	-0.008845

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	13.31	1.648	1.011	0.4294	0.7145	0.02858	0.02551	-3.277
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0001498	0.000003012	2.523E-7	7.846E-7	0.000003814	1.529E-8	9.578E-9	-0.0001504
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.05323	0.0003133	0.0006614	0.00008163	0.001273	0.00005471	0.000008817	-0.02765
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.01213	0.00004513	0.0001013	0.00001176	0.06007	0.000003533	7.405E-7	-0.001099
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	0.7341	0.109	0.1133	0.0284	0.05661	0.4369	0.00643	-0.2887
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	0.7226	0.1091	0.1134	0.02843	0.1167	0.4369	0.006431	-0.2944
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.0005901	0.0000388	0.0000599	0.00001011	0.00002339	5.188E-7	3.515E-7	-0.00455
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	0.7375	0.1091	0.1212	0.02842	0.0286	0.4369	0.006538	-0.2084
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0005199	8.71E-7	7.96E-7	2.269E-7	0.00001104	3.35E-8	1.942E-8	-0.0001906
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.001877	0.000062	0.00009736	0.00001615	0.0001227	0.00002626	0.000008815	-0.001436
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.02648	0.0006935	0.00108	0.0001807	0.001147	0.0002841	0.00003456	-0.02066
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.008755	0.0002656	0.0003291	0.00006921	0.0003595	0.00006801	0.00001094	-0.005627
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	3.574E-8	2.47E-8	1.37E-8	6.434E-9	7.334E-9	3.35E-10	3.25E-10	-0.009236
Water (user) deprivation potential (WDP)	m3 world eqv.	15.2	1.594	9.136	0.4154	1.272	0.06473	0.4037	-22.66

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.02179	0.007205	0.007028	0.001877	0.002378	0	0	0.00004831	0.0001422	-0.01425
Potential incidence of disease due to PM emissions (PM)²	disease incidence	1.001E-7	6.674E-9	5.373E-9	1.739E-9	4.356E-9	0	0	2.14E-10	1.56E-10	-1.166E-7
Potential Soil quality index (SQP)²	unitless	7.761	1.153	0.5724	0.3004	0.4603	0	0	0.003468	0.07121	-15.25
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	8.487E-7	1.335E-9	5.68E-10	3.48E-10	1.85E-8	0	0	3.66E-10	3.8E-11	-3.054E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	9.577E-9	0	9.4E-11	0	2.21E-10	0	0	1E-11	1E-12	-3.641E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	398.7	1.222	0.8928	0.3184	9.389	0	0	0.08533	19.15	-254.5