038785d5-1051-456a-a08b-daaf555166cc Stainless Steel Products Data quality: General requirements and guidelines concerning use of generic and specific data and the quality of those are as described in EN 15804: 2012, clause 6.3.6 and 6.3.7. The data is representative according to temporal, geographical and technological requirements. Temporal: Data for use in moduel A3 is supplied by the manufacturere and consists of the recorded amount of specific material and energy consumption for the products studied. Specific data has been collected in 2017-2018. Generic data has been created or updated within the last 10 years, except for minor exceptions for generic data used that are slightly older than 10 years. Geographical: The geographic region of the production sites included in the calculation is Europe. The specific data from manufacturer is from one site, so no average data is used for several sites. Technological: Data represents technology in use. All generic (background) data has been gathered from the PE International GaBi 6 Professional Database and the Ecoinvent V3 database. Cut-Off Criteria All major raw materials and all the essential energy is included. The production process for raw materials and energy flows that are included with very small amounts (<1%) are not included. This cut-off rule does not apply for hazardous materials and substances. Allocation The allocation of energy and ancilliary material during production was determined by recorded production time for the different product groups. Waste was allocated using total waste streams from the factory and adjusted for the different product groups using mass allocation. 1 2018 2023 06.09.2018- 0609.2023 Norway/Nordics See flow chart Øglænd System AS provides a wide range of products for support, cable ladders, cable trays and accessories. This EPD covers the products from Øglænd System AS that are made from stainless steel, and then machined - but not welded. Stainless steel forms a protective chromium oxide layer when the alloy is exposed to air, hindering direct contact between the alloy and the corrosive environment. If a stainless steel component is damaged, a new chromium oxide layer forms, effectively resealing the damaged area. NEPD-1621-644 EPD specific dataset ecoinvent database (all versions) GaBi database (all versions) NEPD-1621-644 Selamawit Mamo Fufa EN 15804 EN 15804 ISO 14025 ISO 21930 2019-02-22T14:38:24.343+01:00 ILCD format EPD Data Format Extension The Norwegian EPD Foundation 00.00.014 Øglænd System AS true NEPD-1621-644 1.0 1.0 Components for re-use (CRU) General reminder flow Output 0.0 kg Exported electrical energy (EEE) General reminder flow Output 0.0 MJ Exported thermal energy (EET) General reminder flow Output 0.0 MJ Hazardous waste disposed (HWD) General reminder flow Output 0.0 0.00205 kg Materials for energy recovery (MER) General reminder flow Output 0.0 kg Materials for recycling (MFR) General reminder flow Output 0.0 0.402 kg Use of net fresh water (FW) General reminder flow Input 0.0 5.64E-4 m3 Non hazardous waste dispose (NHWD) General reminder flow Output 0.0 0.0189 kg Use of non renewable primary energy (PENRE) General reminder flow Input 0.0 66.6 MJ Use of non renewable primary energy resources used as raw materials (PENRM) General reminder flow Input 0.0 2.57E-4 MJ Use of non renewable secondary fuels (NRSF) General reminder flow Input 0.0 MJ Radioactive waste disposed (RWD) General reminder flow Output 0.0 0.00389 kg Use of renewable primary energy (PERE) General reminder flow Input 0.0 10.1 MJ Use of renewable primary energy resources used as raw materials (PERM) General reminder flow Input 0.0 2.39E-5 MJ Use of renewable secondary fuels (RSF) General reminder flow Input 0.0 MJ Use of secondary material (SM) General reminder flow Input 0.0 0.996 kg Total use of non renewable primary energy resource (PENRT) General reminder flow Input 0.0 66.6 MJ Total use of renewable primary energy resources (PERT) General reminder flow Input 0.0 10.1 MJ Abiotic depletion potential for non fossil resources (ADPE) 0.0 6.16E-4 kg Sb-Äqv. Abiotic depletion potential for fossil resources (ADPF) 0.0 65.9 MJ Acidification potential (AP) 0.0 0.0614 kg SO2-Äqv. Eutrophication potential (EP) 0.0 0.0027 kg Phosphat-Äqv. Global warming potential (GWP) 0.0 4.66 kg CO2-Äqv. Ozone Depletion Potential (ODP) 0.0 2.42E-7 kg CFC 11 eq. Photochemical Ozone Creation Potential (POCP) 0.0 0.029 kg Ethen-Äqv.