Process Data set: Namsen 1200 Outlet (en)

Process Data set: Namsen 1200 Outlet (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2024
Name	Namsen 1200 Outlet
Technical purpose of product or process	Namsen is a cost-effective luminaire with dimmable integrated LED. The versions with on-off switch and 2 sockets (16A) are suitable for under-cupboard lighting in the kitchen, laundry room, etc. Separate connection for socket and light.The version without a switch or plug is great for general lighting in hallways, storage rooms, lofts etc. Easy installation and cable feed on three sides. The front can be rotated to place the connectors on the right or left side. System Wattage: 27.0 W. Luminous flux: 2110lm. Efficacy: 78 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B50>50,000, . Light distribution: Direct. Control/Dimming: Trailing edge dimming. Luminiare class: Class I. Housing: Steel. Optics: Acrylic (PMMA). Height: 46.0mm. Length: 1195.0 mm. Width: 69.0 mm. EAN: 7021981120252 The EPD also covers the following products: EAN: 7021981120245 - NAMSEN 1200 2700K W/OUTLET EAN: 7021981120252 - NAMSEN 1200 3000K W/OUTLET Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Namsen 1200 Outlet - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.145787037048 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-12-04" - "2029-12-04"
Publication date	2024-12-04
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/namsen/112025/pdf/specification_112025.pdf Link to CE Declaration: https://www.sg-as.com/assets/product/default/data/702250_Namsen/50/702250_Namsen.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-8273-7939_Namsen-1200-Outlet.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-12-22T19:34:57
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	02a98bd9-4a1c-41c2-84bd-736b158783c3
Date of last revision	2024-11-28T09:00:57.9745488Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-8273-7939
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	31.14	0.00231	0.8645	0.1703	0.001173	3841	0.02144	0.1062	0.07769	-3.294
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	1.885	0	0	0	-1.885	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	33.02	0.00231	0.8645	0.1703	-1.884	3841	0.02144	0.1062	0.07769	-3.294
Use of non renewable primary energy (PENRE)	Input	MJ	277.1	0.2041	8.591	14.99	0.07125	297	1.894	0.8036	0.3276	-7.459
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	9.477	0	0	0	0	0	0	-10.42	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	286.6	0.2041	8.591	14.99	0.07125	297	1.894	-9.613	0.3276	-7.459
Use of secondary material (SM)	Input	kg	2.035	0	0	0	0	0	0	0	0.001548	0.04083
Use of renewable secondary fuels (RSF)	Input	MJ	0.2235	0.00004518	0.00076	0.005613	0.0000389	3.017	0.0004194	0.001963	0.0005105	-0.009094
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.01803	0.0003836	0.007154	0.03007	0.0001604	7.515	0.003561	-0.00004346	0.01348	-0.487
Use of net fresh water (FW)	Input	m3	0.2238	0.00002282	0.02343	0.001289	0.00003361	28.69	0.0002118	0.0009869	0.0002966	-0.01184
Hazardous waste disposed (HWD)	Output	kg	0.1048	0.00001844	0.001187	0.0007311	0	0.1904	0.0001712	0.0000207	0.08542	-0.00227
Non hazardous waste dispose (NHWD)	Output	kg	3.116	0.009797	0.08025	0.4629	0.3148	22.85	0.09094	0.02811	0.5396	-0.04845
Radioactive waste disposed (RWD)	Output	kg	0.0007214	0.000001339	0.000006569	0.0001029	0	0.002656	0.00001243	0.000001054	0.000001099	-0.00003195
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.02559	0	0.2928	0	0	1.348	0.00001545	-0.001629
Materials for energy recovery (MER)	Output	kg	0	0	0.005519	0	0.0003709	0	0	0.1722	3.778E-7	-0.0002142
Exported electrical energy (EEE)	Output	MJ	0	0	0.008314	0	0.01801	0	0	0.2646	0.00002451	-0.0005358
Exported thermal energy (EET)	Output	MJ	0	0	0.1258	0	0.2724	0	0	4.003	0.0003708	-0.008106

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	282.9	0.2041	8.591	14.99	0.07124	296.6	1.894	0.8034	0.3274	-7.456
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.00991	3.705E-7	0.000003	0.00002023	1.239E-7	0.00162	0.000003439	4.529E-7	1.408E-7	-0.001133
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.226	0.00004132	0.00507	0.01637	0.00002411	0.1698	0.0003836	0.0003845	0.0001252	-0.06526
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.1947	0.000005379	0.0002416	0.0003765	0.5336	0.6007	0.00004993	0.000164	0.00001516	-0.002431
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	22.84	0.01381	0.9706	1.062	0.005092	21.73	0.1282	0.4767	0.04014	-0.487
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	22.69	0.01382	0.971	1.062	0.5387	22.42	0.1283	0.477	0.04029	-0.4912
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.03807	0.000005051	0.000153	0.0005287	0.000001684	0.08963	0.00004688	0.0001662	0.0001375	-0.00181
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	23.2	0.01382	0.917	1.062	0.005094	22.37	0.1283	0.477	0.04183	-0.2435
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.003508	1.296E-7	0.00002155	0.000006775	4.181E-8	0.001563	0.000001203	0.000002801	7.938E-7	-0.0003812
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.02654	0.000008136	0.001047	0.003938	0.000007976	0.01866	0.00007552	0.00009461	0.00005411	-0.002863
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.3012	0.00009098	0.01154	0.04385	0.00008634	0.2429	0.0008444	0.001025	0.0003702	-0.04228
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.09647	0.00003407	0.003039	0.01185	0.00002482	0.06532	0.0003162	0.000268	0.0001412	-0.01112
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.0000107	3.004E-9	1.422E-8	2.339E-7	1.075E-9	0.00000149	2.788E-8	4.61E-9	2.766E-9	-0.001806
Water (user) deprivation potential (WDP)	m3 world eqv.	548.5	0.06655	1.4	9.929	0.09029	5.17E+4	0.6177	5.756	3.561	-34.49

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.9184	0.0008483	0.007431	0.065	0.0003048	5.381	0	0.007874	0.003801	0.001242	-0.03721
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001351	8.89E-10	6.847E-8	3.753E-8	3.56E-10	0.000001217	0	8.29E-9	2.467E-9	2.268E-9	-1.162E-7
Potential Soil quality index (SQP)²	unitless	78.53	0.1398	1.82	7.234	0.04779	149.4	0	1.298	0.1605	0.7847	-11.38
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000002435	1.56E-10	1.19E-8	7.486E-9	1.19E-10	0.000001519	0	1.507E-9	4.279E-8	6.85E-10	-4.16E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	5.315E-8	0	2.71E-10	0	3E-12	6.45E-8	0	0	7.32E-10	7.6E-11	-3.024E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	2024	0.1655	25.19	10.21	0.09501	1351	0	1.536	2.077	224.5	-510.2