Process Data set: AXLJ-RMF E Path 3x240/35 LT 24kV (en)

Process Data set: AXLJ-RMF E Path 3x240/35 LT 24kV (en) en

Process information

Key Data Set Information
Location	SE
Geographical representativeness description	Sweden
Reference year	2024
Name	AXLJ-RMF E Path 3x240/35 LT 24kV
Technical purpose of product or process	AXLJ-RMF is a 3-core cable designed for replacement of bare overhead lines. Primary developed to be ploughed down but thanks to the robust design the cable can stand the stresses that appears when laid in water with moderate currents and limited depth. Ripcords for easier and safer stripping of the outer sheath. Designed and tested according to HD 620 Part 10 Section M and K. Conductor design Stranded, round, compacted aluminium, longitudinal water sealed Conductor material Aluminium Core insulation material XLPE Screen construction Wire screen Material outer sheath MDPE Rip cord Yes UV resistant Yes STANDARDS APPLIED: SS 424 14 16 Construction standard 12-36 kV CENELEC HD 620 Part 10 Section M Harmonized construction and testing standard
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	Prysmian Group Sverige AB
Quantitative reference
Reference flow(s)	AXLJ-RMF E Path 3x240/35 LT 24kV - 1.0 * 1.0 m (Length)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.0 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-01-09" - "2029-01-09"
Publication date	2024-01-09
Technological representativeness
Technology description including background system	AXLJ-RMF E Path 3x240/35 LT 24kV SAPcode 20415446 External article code 0082480 As individual calculations show a difference in resulting GWP/environmental impact to be less than 10%, this EPD may be used as a reference for: AXLJ-RMF E Path 3x240/25 LT 12kV SAPcode 20376501 External article code - AXLJ-RMF E Path 3x240/25 LT 24kV SAPcode 20376494 External article code -

Modelling and validation

Subtype

specific dataset

LCA methodology report

NPCR 027 Part B for Electrical cables and wires

Data sources, treatment and representativeness

Documentation of data quality management

NPCR 027 Part B for Electrical cables and wires

Data source(s) used for this data set

NEPD-5754-5049_AXLJ-RMF-Eco-Cable-3x240-35-LT-24kV.pdf

Original EPDs

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-01-08T12:37:18
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	fe609fd7-7670-4b36-adb4-d034f045045e
Date of last revision	2024-12-10T07:34:23.5797159Z
Data set version	00.05.000
Registration authority	EPD Norway
Registration number	NEPD-5754-5049
Owner of data set	Prysmian Group Sverige AB
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	78.45	0.1983	10.24	0.0766	1.781	0.3747	0.04581	0.01055	0.04955	-57.49
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0	0	0	0	0	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	78.45	0.1983	10.24	0.0766	1.781	0.3747	0.04581	0.01055	0.04955	-57.49
Use of non renewable primary energy (PENRE)	Input	MJ	469.7	13.42	21.63	6.086	10.3	0.7812	3.246	0.2578	0.571	-119.6
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	96.94	0	0	0	0.1029	0	0	-91.79	0	-0.2164
Total use of non renewable primary energy resource (PENRT)	Input	MJ	566.7	13.42	21.63	6.086	10.4	0.7812	3.246	-91.54	0.571	-119.8
Use of secondary material (SM)	Input	kg	1.037	0	0	0	0.02081	0	0	0	0.003405	0.01545
Use of renewable secondary fuels (RSF)	Input	MJ	0.3915	0.005307	0.04017	0.002679	0.008853	0.001452	0.00164	0.0002551	0.001072	-0.01876
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.169	0.03575	0.1293	0.008981	0.007728	0.004587	0.005853	0	0.03749	-0.8321
Use of net fresh water (FW)	Input	m3	0.473	0.001485	0.02503	0.000693	0.01005	0.0008511	0.0003418	0.001366	0.0006671	-0.2498
Hazardous waste disposed (HWD)	Output	kg	0.3009	0.000809	0.1033	0.0003331	0.0148	0.00004078	0.0001656	0	0.3344	0.03787
Non hazardous waste dispose (NHWD)	Output	kg	8.615	0.5427	0.1575	0.5294	0.2318	0.002574	0.1551	0	1.589	-2.744
Radioactive waste disposed (RWD)	Output	kg	0.001133	0.00009021	0.0003217	0.00004155	0.00003224	0.00001175	0.00002213	0	0.000003749	-0.0004895
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.006802	0	0.02954	0	0	1.47	0.00007279	-0.0006085
Materials for energy recovery (MER)	Output	kg	0	0	0.3872	0	0.02938	0	0	1.082	0.0000857	-0.00009555
Exported electrical energy (EEE)	Output	MJ	0	0	0.2255	0	0.0436	0	0	1.954	0.0008521	-0.0002229
Exported thermal energy (EET)	Output	MJ	0	0	3.411	0	0.6596	0	0	29.55	0.01289	-0.003372

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	536.9	13.42	21.58	6.085	11.64	0.7795	3.246	0.2577	0.5709	-119.8
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.001214	0.00001111	0.000007639	0.000006681	0.00002492	2.662E-7	0.000005831	1.674E-7	2.385E-7	-0.00003743
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.3266	0.01486	0.001378	0.001645	0.00692	0.00004331	0.00088	0.000457	0.000202	-0.07232
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.3491	0.0004044	0.04737	0.0001606	0.007944	0.0001352	0.00008778	0.00003576	0.00001827	-0.04273
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	43.89	0.9617	0.4106	0.3912	0.9803	0.006652	0.2153	3.031	0.1147	-9.39
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	44.49	0.9625	0.4697	0.3915	0.9934	0.007219	0.2154	3.031	0.1147	-9.612
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.2455	0.000472	0.0118	0.0001142	0.005159	0.000432	0.00007525	0.000005963	0.00000844	-0.1799
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	44.45	0.9624	0.4597	0.3915	0.9926	0.007209	0.2154	3.031	0.1184	-9.153
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001989	0.000007895	0.00001342	0.000002983	0.00004031	4.497E-7	0.000001691	3.283E-7	5.259E-7	-0.0004292
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.04394	0.00422	0.0003416	0.0004945	0.0009926	0.000007377	0.000261	0.0002191	0.0001572	-0.008655
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.4991	0.04675	0.003383	0.005469	0.01121	0.00009711	0.002886	0.00232	0.0007769	-0.0968
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1526	0.01257	0.0008159	0.001759	0.003388	0.00002212	0.0008837	0.0005571	0.0002364	-0.03198
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.00000221	2.023E-7	9.433E-8	9.04E-8	5.313E-8	3.261E-9	4.908E-8	3.481E-9	7.097E-9	-0.01248
Water (user) deprivation potential (WDP)	m3 world eqv.	7004	8.174	2154	4.668	183.7	79.1	3.097	1.145	9.089	-5275

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Use B1	Maintenance B2	Repair B3	Replacement B4	Refurbishment B5	Operational energy use B6	Operational water use B7	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.134	0.05762	0.7287	0.0266	0.0393	0	0	0	0	0	0.02672	0	0	0.01419	0.0005292	0.003162	-0.5229
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000003076	6.046E-8	1.079E-8	3.444E-8	6.405E-8	0	0	0	0	0	3.12E-10	0	0	1.55E-8	1.877E-9	3.302E-9	-7.432E-7
Potential Soil quality index (SQP)²	unitless	97.7	9.134	9.737	6.981	2.547	0	0	0	0	0	0.3451	0	0	2.238	0.03822	1.522	-18.43
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000002033	8.919E-9	1.01E-8	4.305E-9	4.129E-8	0	0	0	0	0	2.85E-10	0	0	2.583E-9	4.024E-9	1.098E-9	-3.816E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	7.47E-8	0	4.17E-10	0	1.505E-9	0	0	0	0	0	1.2E-11	0	0	0	9.7E-11	3.9E-11	-2.458E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1.82E+3	1E+1	12.78	4.451	45.3	0	0	0	0	0	0.4113	0	0	2.391	2.172	412.6	-233.2