Close Go back Collapse all sections
Process Data set: Sandplast 696 FOG™ (en) en

Key Data Set Information
Location NO
Geographical representativeness description Scandinavia and Europe
Reference year 2020
Name
Sandplast 696 FOG™
Technical purpose of product or process Flügger Sandplast 696 FOG is a premixed hand-filler, ready-to-use. It contains light fine-grained filler paste with good filling capacity and high strength. The product is ecolabelled with the Nordic Ecolabel. Flügger Sandplast 696 FOG gives optimal working conditions, good sanding properties and minimum sinking. The product is applicable for leveling of ceilings and walls. Used for filling and reinforcing joints and holes in gypsum plasterboards. Also useable for patching and filling when smoothing out plaster, concrete and previously painted surfaces. For information on Green Building Standard credits and Ecolabels, see "Additional Information" on page 4. The filler is only produced in one color and there is no variation in product composition.
Classification
Class name : Hierarchy level
  • EPDNorge: Construction / Technical-chemical building materials products
General comment on data set The CEPE database is used as basis for the raw material composition. Specific data for the product composition and raw material amounts has been provided by the manufacturer and represents the production of the declared product. Production site data was collected in 2018, except data on heat production that was collected in 2019. Remaining data is based on Ecoinvent v3.5, but adjusted to improve representativeness. All energy consumption in the database is assumed not to be used as raw material. The allocation is made in accordance with the provisions of NS-EN15804. Incoming energy, water and waste production in-house is primarily allocated equally among all products through mass allocation. The recycling process and transportation of the material is allocated to this analysis. All major raw materials and essential energy is included. The production process for raw materials and energy flows with very small amounts (<1%) are not included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Time representativeness
Data set valid until 2025
Time representativeness description "07.01.2020" - "07.01.2025"
Technological representativeness
Technology description including background system Density: 1,29 kg/l Solids by volume: 57,0 % Binder: Waterbased polymer dispersion Solvent: Water Grain size: Max. 0,20mm pH: 9,3 Color: Beige Nominal spreading rate: 0,5 - 2,0 m2/l The product packaging is based on an average sized plastic packaging. For safety, health and environmental conditions, see the Safety Data Sheet for the declared product on www.flugger.no For information on technical data, application and use of the product, see the Technical Data Sheet and FDV (Forvaltning, Drift og Vedlikehold) for the declared product on www.flugger.no

Indicators of life cycle

IndicatorDirectionUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 Transport
A4
Input
  • 3.64
  • 0.00426
  • 0.67
  • 0.00515
Input
  • 0
  • 0
  • 0.0133
  • 0
Input
  • 3.64
  • 0.00426
  • 0.683
  • 0.00515
Input
  • 3.54
  • 0.39
  • 1.69
  • 0.486
Input
  • 4.32
  • 0
  • 0
  • 0
Input
  • 7.86
  • 0.39
  • 1.69
  • 0.486
Input
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
Input
  • 0
  • 0
  • 0
  • 0
Input
  • 0.03
  • 0.0000744
  • 0.00108
  • 0.000105
Output
  • 0.0000694
  • 2.46E-7
  • 0.00000405
  • 2.81E-7
Output
  • 0.0751
  • 0.0267
  • 0.123
  • 0.0438
Output
  • 0.0000288
  • 0.00000263
  • 0.0000148
  • 0.0000033
Output
  • 0
  • 0
  • 0
  • 0
Output
  • 0
  • 0
  • 0.000941
  • 0
Output
  • 0
  • 0
  • 0.0000192
  • 0
Output
  • 0
  • 0
  • 0.00128
  • 0
Output
  • 0
  • 0
  • 0.0137
  • 0

IndicatorUnit Raw material supply
A1
 Transport
A2
 Manufacturing
A3
 Transport
A4
  • 7.03
  • 0.383
  • 0.826
  • 0.478
  • 8.64E-7
  • 6.89E-8
  • 0.00000613
  • 5.69E-8
  • 0.00154
  • 0.0000812
  • 0.000771
  • 0.000077
  • 0.332
  • 0.025
  • 0.0814
  • 0.0291
  • 0.000186
  • 0.0000134
  • 0.000198
  • 0.0000105
  • 0.000102
  • 0.0000041
  • 0.0000384
  • 0.00000457
  • 3.44E-8
  • 4.66E-9
  • 1.09E-8
  • 5.84E-9