Process information
| Key Data Set Information | |
| Location | NO |
| Geographical representativeness description | Europe |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | The analysis is a cradle-to-grave study made for one charger manufactured , installed and used under ordinary conditions over its lifetime. Modules A1-A5 are included in the analysis. It includes the extraction and production of raw materials, transportation to the factory, the production process itself, transportation to market and installation of the product. B6 is the operational energy usage based on a normal use. C1-C4, D are mandatory modules which include end of life treatment of materials and the benefits from recycling. |
| Technical purpose of product or process | Zaptec Pro MID is an alternating current (AC) wall or column mounted charging station in accordance with IEC61851-1, EVSE mode 2. The charging station is for large scale deployment such as public parking, offices, multi-family housing etc. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-10-31 - 2030-10-31 |
| Technological representativeness | |
| Technology description including background system | Dimensions: 392 mm W: 258 mm D: 112 mm Installation circuit: Max. 63A circuit breaker on installation circuit for charging stations. Backplate connection box Cable cross section 2.5–10 mm2 Cable diameter 10–18,5mm Installation network, Voltages: TN, IT and TT 230VAC ±10% 400VAC ±10% Max. current and charging output: 22 kW at 32A / 3-phase (applicable to TN networks only)* 12,7 kW at 32A / 3-phase (IT network)* 7,4 kW at 32A / 1-phase (IT/TN network)* 3W at standby Integrated circuit breaker: Built-in 3 x 40A MCB (miniature circuit breaker) type C Charging socket: IEC 62196-2 Type 2 with integrated self-closing cover. Electronic lock can be locked permanently by the user. Earth fault protection: Built-in type B RCD Calibration and a self-test are carried out before the start of every charging cycle. RCD can be automatically reset by disconnecting from the charging connector. Integrated Power Meter: MID class B certified (EN 50470) Display showing total energy (kWh) Theft protection: The front cover of the Zaptec Pro can only be opened using a special tool. The charging cable can be locked permanently to the charging station. Load balancing: Together with other Zaptec Pro charging stations, available power in the installation will be distributed automatically between the devices and phases. Phase balancing: The charging station will dynamically select any single phase or 3-phase in a system with other Zaptec Pro charging stations, depending on the available power Communications interface and cloud connection/network: 4G LTE-M Wi-Fi 2.4 GHz, IEEE 802.11 b/g/n (channels 1-11) Powerline (PLC) – HomePlug Green PHY®, 10 Mbit/s Identification and configuration: Bluetooth 5.1 (BR/EDR/BLE) RFID/NFC reader – ISO/IEC 14443 A (Type A, 13.56 MHz) ISO/IEC 15693 (Mifare classic, 13.56 MHz) Plug and Charge - Hardware support for ISO15118 RGBW LED-circle for status of unit Standards and approvals: CE compliance in accordance with the Radio Equipment Directive 2014/53/EU and ROHS Directive 2011/65/EU, and compliance with IEC 61851-1 (TUV SÜD) and IEC 61851-21-2 Temperature range: –30°C to +40°C Degree of protection: IP54, indoor and outdoor use IK10 impact protection UL94 5VB flammability rating UV resistant Electrical protection Protection class I Overvoltage category III (4kV) Integration services Third-party integration alternatives (API, Webhooks) OCPP 1.6J cloud-to-cloud Message subscription |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2026-02-18T12:40:43 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | fbe2984f-61a4-44d0-a59a-4a7f35ab50a7 |
| Date of last revision | 2025-10-28T12:50:57.4128843Z |
| Data set version | 00.02.001 |
| Registration authority | |
| Registration number | NEPD-12907-14131 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle