Process Data set: Arena Sport Asymmetric 1200 (en)

Process Data set: Arena Sport Asymmetric 1200 (en) en

Process information

Key Data Set Information
Location	DK
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Arena Sport Asymmetric 1200
Technical purpose of product or process	Arena Sport is an energy efficient luminaire especially suited for sports halls where padel, tennis and badminton is played. It has a wide asymmetric light distribution, which gives a great and even light on a standard tennis court, when installed along the long sides of the court. It is easy to install with hinged gear tray. 7-pole terminal block with 7x2,5mm2 through-wiring. Delivered as standard with a protective ball grid, approved per DIN VDE 0710-13. Wattage: 140W. Voltage: 220-240V. Max luminaires per circuit breaker: B10: 9, B16: 15, C10: 16, C16:26. Leakage current (mA): 0.31. Luminous flux: 20540lm. Efficacy: 147 lm/W. Colour temperature: 4000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000. Light distribution: Asymmetric. Control/Dimming type: DALI-2. Luminaire class: Class I. IP Class: IP23. Integrated surge protection: 1/2 kV. Contains light sourc of energy class: B. Breeam: Fulfils Hea 01 for flicker free lighting. Housing: Sheet steel. Optics: Acrylic (PMMA). Length: 1205 mm. Width: 305 mm. Height: 114 mm. EAN: 5703821183680. Please note that the above has been calculated with the Norwegian energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Arena Sport Asymmetric 1200 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.360000000029 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025-06-04 - 2030-06-04
Publication date	2025-06-04
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/arena-asymmetric/8246096508

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-11305-11277_Arena-Sport-Asymmetric-1200-.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-08-06T16:25:55
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	f58f4f7a-5d65-452d-9132-ee011060f24a
Date of last revision	2025-06-03T14:00:32.3215647Z
Data set version	00.03.000
Registration authority	EPD Norway
Registration number	NEPD-11305-11277
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	163.9	0.07611	82.79	0.7801	0.002897	3.355E+4	0.13	0.8114	0.3504	-21.97
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	6.376	0	0	0	-6.377	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	170.3	0.07611	82.79	0.7801	-6.374	3.355E+4	0.13	0.8114	0.3504	-21.97
Use of non renewable primary energy (PENRE)	Input	MJ	1392	5.322	91.88	54.5	0.176	2594	9.083	4.581	1.543	-84.58
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	15.84	0	0	0	0	0	0	-17.54	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	1408	5.322	91.88	54.5	0.176	2594	9.083	-12.96	1.543	-84.58
Use of secondary material (SM)	Input	kg	6.01	0	0	0	0	0	0	0	0.006112	0.04866
Use of renewable secondary fuels (RSF)	Input	MJ	2.597	0.002722	2.246	0.02791	0.00009609	26.34	0.004652	0.01613	0.002879	0.0957
Use of non renewable secondary fuels (NRSF)	Input	MJ	13.17	0.00975	1.623	0.09979	0.0003961	65.63	0.01663	-0.00009586	0.05588	2.762
Use of net fresh water (FW)	Input	m3	1.324	0.0005686	0.2441	0.005828	0.00008303	250.6	0.0009713	0.004577	0.001569	-0.1114
Hazardous waste disposed (HWD)	Output	kg	0.6815	0.0002744	0.0835	0.002811	0	1.663	0.0004684	0.00004265	0.3633	-0.006584
Non hazardous waste dispose (NHWD)	Output	kg	22.15	0.2584	4.792	2.65	0.7776	199.5	0.4417	0.4041	2.402	-2.423
Radioactive waste disposed (RWD)	Output	kg	0.00485	0.00003626	0.000252	0.0003712	0	0.02319	0.00006187	0.000002277	0.000005201	-0.0002258
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	4.678	0	0.7232	0	0	8.103	0.0000152	-0.001904
Materials for energy recovery (MER)	Output	kg	0	0	0.4086	0	0.05436	0	0	0.515	3.718E-7	-0.0002508
Exported electrical energy (EEE)	Output	MJ	0	0	0.2659	0	0.04448	0	0	0.2616	0.00002412	-0.0006144
Exported thermal energy (EET)	Output	MJ	0	0	4.023	0	0.6729	0	0	3.957	0.0003649	-0.009296

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	1407	5.322	91.86	54.49	0.176	2.59E+3	9.082	4.58	1.542	-84.59
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.01206	0.000009711	0.00005155	0.00009956	3.062E-7	0.01415	0.00001659	0.000003521	6.426E-7	-0.002041
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.8358	0.001035	0.02516	0.01036	0.00005957	1.482	0.001726	0.001732	0.0005898	-0.1506
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.3216	0.0001456	0.3101	0.001492	1.32	5.246	0.0002486	0.002216	0.00006595	-0.02179
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	108.9	0.3521	6.973	3.604	0.01258	189.7	0.6007	1.293	0.1388	-7.592
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	108.9	0.3524	7.301	3.607	1.333	195.8	0.6012	1.296	0.1395	-7.683
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.2561	0.0001256	0.01779	0.001283	0.00000416	0.7827	0.0002138	0.0006271	0.0005483	-0.06905
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	110.1	0.3524	9.142	3.607	0.01258	195.4	0.6011	1.295	0.1395	-8.78
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.01552	0.00000281	0.0004667	0.00002879	1.033E-7	0.01365	0.000004799	0.00002307	0.000003541	-0.0009875
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.1167	0.0002059	0.004882	0.00205	0.0000197	0.1629	0.0003416	0.0003665	0.0001817	-0.01122
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	1.361	0.002303	0.06451	0.02293	0.0002133	2.121	0.003821	0.004092	0.001794	-0.1391
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.4277	0.0008738	0.01478	0.008782	0.00006131	0.5704	0.001464	0.001128	0.0006378	-0.04639
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000009154	7.975E-8	3.841E-7	8.164E-7	2.656E-9	0.00001301	1.361E-7	9.56E-8	1.354E-8	-0.00167
Water (user) deprivation potential (WDP)	m3 world eqv.	6885	5.14	1085	52.71	0.223	1.01E+4	8.785	22.87	22.55	-1853

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	5.91	0.02326	0.375	0.2382	0.0007529	46.99	0	0.0397	0.02146	0.006649	-0.2437
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000006117	2.151E-8	2.671E-7	2.207E-7	8.79E-10	0.00001063	0	3.677E-8	2.129E-8	9.902E-9	-7.024E-7
Potential Soil quality index (SQP)²	unitless	433.5	3.717	144.4	38.12	0.1181	1304	0	6.353	1.531	3.436	-20.35
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000006709	4.303E-9	1.064E-7	4.413E-8	2.95E-10	0.00001327	0	7.355E-9	9.207E-8	3.739E-9	-4.275E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	3.046E-7	0	3.003E-9	0	7E-12	5.632E-7	0	0	2.224E-9	3.52E-10	-2.93E-8
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	6.47E+3	3.944	148.8	40.4	0.2347	1.18E+4	0	6.733	18.62	1324	-1099