| Key Data Set Information | |
| Location | DE |
| Geographical representativeness description | Europe. |
| Reference year | 2024 |
| Name |
|
| Technical purpose of product or process | Supply and extract air unit with switchover option for secondary air operation, including cross flow heat recovery unit and heat exchanger for installation under the ceiling. Ready-to-operate decentralised ventilation unit that provides good comfort levels and is used for the ventilation of internal spaces such as classrooms, conference rooms and day nurseries. For more information see: https://www.trox.de/en/ceiling-units/x-cube-schoolair-d%C2%A0%C2%A0-5bc4e1e85687c356. Ventilation units for installation on the façade in the ceiling area. Please note: The ceiling ventilation unit variant described is equipped with an integrated individual room control for independent classroom operation. The supplied controllers contain the parameters of the standard control for self-sustaining operation according to our control description. Ventilation unit for schools – ceiling installation – master unit TROX X-CUBE/SCHOOLAIR-D ventilation unit for ceiling installation, for supply and extract air function, and switchover option to secondary air mode (depending on room air quality), heat recovery and heating function for installation in the ceiling area. This EPD includes the environmental data of the product series Schoolair-D. The following represents a specific dataset of the most sold variant in the declared sales year (SAD-HV-0-2-1-BB-W/3363x410x1030/P1-C3-MA-T-0-0-Z-A-HV-R-0.4). |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Energy, water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | "0001-01-01" - "0001-01-01" |
| Technological representativeness | |
| Technology description including background system | Width: 1640 mm. Height: 400 mm. Depth: 800 mm. Volume flow rate: 150, 200, 250 m³/h (boost 300 m³/h). Nominal volume flow rate: 250 m³/h. Sound power level: 32 – 47 dB(A). Heat recovery efficiency: 54 %. Maximum operating pressure, water side 6 bar Maximum operating temperature: 75 °C. Supply voltage: 230 V AC ±10 %, 50/60 Hz. Power rating: 197 VA. For more technical information see: https://www.trox.de/en/ceiling-units/x-cube-schoolair-d%C2%A0%C2%A0-5bc4e1e85687c356#technical-information. |
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-09-01T01:03:57 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | f2011cb3-2919-4b88-aea9-e06b33a33a7f |
| Date of last revision | 2025-06-25T14:09:30.4137333Z |
| Data set version | 00.08.000 |
| Registration authority | |
| Registration number | NEPD-8471-8147-EN |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Indicators of life cycle