Process Data set: Sense Pro 300x1200 (en)

Process Data set: Sense Pro 300x1200 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe.
Reference year	2025
Name	Sense Pro 300x1200
Technical purpose of product or process	The Sense panel is well designed and only 10 mm high. A narrow frame ensures attractive look and high efficiency.Sense can be mounted to visible T-rail ceilings without accessories and to concealed T-rail ceilings, DAMPA clip-in ceilings, Troldtekt acoustic panels and Gypsum, and surface-mounted using accessories. This makes Sense an all-round quality panel that can be used everywhere. Sense is available in several lumen packages, phase-dimming or DALI depending on which driver kit is selected (accessory). Colour temperature: 3000 K. Colour rendering: Ra>80. MacAdams factor: SDCM:3 . Lifetime: L80/B20>100,000, L90>50.000. Light distribution: Direct. Optic: Plastic opal prism. Luminiare class: Class III. Contains light source of energy class: C. Housing: Aluminium. Height: 11 mm. Length: 1197 mm. Width: 297 mm. EAN: 7021982126765. The EPD also covers the following products: EAN: 7021982126772 - SENSE PRO 300x1200 4000K RA>80 EAN: 7021982127274 - SENSE PRO 300x1200 4000K RA>90 Please note that the above has been calculated with the Norwegian energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Sense Pro 300x1200 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.19444444446 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025 - 2030-11-17
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/int/en/pdf/article/212676/703080/specification_212676.pdf Link to CE declaration on our website: https://www.sg-as.com/int/en/file/techfile/BZ3R/Sense%20Pro%20300x1200.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-14077-14427_Sense-Pro-300x1200.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-11-17T12:53:13
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	eed20de3-0211-4a56-85f7-6eb5ddee5fc3
Date of last revision	2025-11-14T15:32:42.436611Z
Data set version	00.02.002
Registration authority	EPD Norway
Registration number	NEPD-14077-14427
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	19.88	0.02715	0.9245	0.2476	0.001565	0.03687	0.02089	0.03265	-13.36
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	3.444	0	0	0	-3.444	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	23.33	0.02715	0.9245	0.2476	-3.443	0.03687	0.02088	0.03265	-13.36
Use of non renewable primary energy (PENRE)	Input	MJ	364	2.399	11.36	21.79	0.09505	2.575	0.2906	0.3172	-18.56
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	43.06	0	0	0	0	0	-43.06	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	404.9	2.399	11.36	21.79	0.09505	2.575	-42.77	0.3172	-18.56
Use of secondary material (SM)	Input	kg	0.3709	0	0	0	0	0	0	0.001984	0.003858
Use of renewable secondary fuels (RSF)	Input	MJ	0.05715	0.0005311	0.0005117	0.007998	0.0000519	0.001319	0.0003953	0.0005136	0.03081
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.0238	0.004509	0.005579	0.04358	0.000214	0.004716	-6.896E-7	0.002371	0.4226
Use of net fresh water (FW)	Input	m3	0.1803	0.0002683	0.007087	0.001901	0.00004485	0.0002754	0.002201	0.0003845	-0.03164
Hazardous waste disposed (HWD)	Output	kg	0.1211	0.0002168	0.000947	0.001106	0	0.0001328	5.951E-7	0.02392	-0.002125
Non hazardous waste dispose (NHWD)	Output	kg	3.218	0.1152	0.1182	0.6909	0.42	0.1252	0.001093	1.128	-0.6308
Radioactive waste disposed (RWD)	Output	kg	0.0004048	0.00001574	0.00002208	0.0001492	0	0.00001754	4.755E-8	0.00000197	-0.00004273
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.0584	0	0.3906	0	1.127	0.00007379	-0.000151
Materials for energy recovery (MER)	Output	kg	0	0	0.005503	0	0.02936	0	0.7879	0.00004391	-0.00001988
Exported electrical energy (EEE)	Output	MJ	0	0	0.008456	0	0.02402	0	1.211	0.0004866	-0.00004871
Exported thermal energy (EET)	Output	MJ	0	0	0.1279	0	0.3634	0	18.32	0.007362	-0.0007369

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	366.2	2.399	11.36	21.79	0.09505	2.575	0.2906	0.3172	-18.56
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.0005776	0.000004356	0.000002917	0.0000299	1.654E-7	0.000004705	2.182E-7	1.096E-7	-0.00003492
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1715	0.0004857	0.006406	0.02286	0.00003217	0.0004895	0.0004221	0.0001091	-0.01365
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.364	0.00006323	0.0001941	0.0005486	0.713	0.0000705	0.0000484	0.00001005	-0.004101
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	28.63	0.1624	1.251	1.54	0.006794	0.1703	1.869	0.0971	-1.765
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	28.29	0.1625	1.251	1.541	0.7198	0.1705	1.869	0.09714	-1.787
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.0318	0.00005937	0.0001363	0.0007575	0.000002247	0.00006062	0.00002068	0.0000237	-0.01759
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	28.98	0.1625	1.192	1.541	0.006796	0.1704	1.868	0.1004	-2.205
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.001607	0.000001523	0.00002268	0.00001004	5.578E-8	0.000001361	4.852E-7	2.7E-7	-0.000118
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.02667	0.00009563	0.001493	0.00549	0.00001064	0.00009686	0.0001978	0.000131	-0.001988
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.2682	0.001069	0.01645	0.06114	0.0001152	0.001083	0.00203	0.0004167	-0.02171
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1037	0.0004004	0.006202	0.01657	0.00003311	0.000415	0.0004903	0.0001423	-0.008339
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	9.315E-7	3.531E-8	4.599E-8	3.391E-7	1.434E-9	3.858E-8	4.215E-9	3.922E-9	-0.007736
Water (user) deprivation potential (WDP)	m3 world eqv.	612.8	0.7823	1.061	14.08	0.1205	2.491	2.118	4.417	-377.3

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.439	0.009971	0.01641	0.09429	0.0004067	0	0.01126	0.000827	0.001655	-0.04612
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.00000168	1.05E-8	7.514E-8	5.652E-8	4.75E-10	0	1.043E-8	1.883E-9	2.073E-9	-1.863E-7
Potential Soil quality index (SQP)²	unitless	62.77	1.644	2.211	10.73	0.06376	0	1.801	0.05248	0.9423	-11.24
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	6.226E-7	1.908E-9	5.457E-8	1.119E-8	1.59E-10	0	2.085E-9	6.537E-9	3.81E-10	3.001E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	4.311E-8	0	3.44E-10	0	4E-12	0	0	1.32E-10	2.4E-11	-6.846E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	895.7	1.945	28.3	14.98	0.1268	0	1.909	3.995	207	-102.2