Process Data set: Namsen 1200 (en) - EPD Global Digi Node

Process Data set: Namsen 1200 (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe.
Reference year	2024
Name	Namsen 1200
Technical purpose of product or process	Namsen 1200 is a cost-effective luminaire with dimmable integrated LED. The versions with on-off switch and 2 sockets (16A) are suitable for under-cupboard lighting in the kitchen, laundry room, etc. Separate connection for socket and light.The version without a switch or plug is great for general lighting in hallways, storage rooms, lofts etc. Easy installation and cable feed on three sides. The front can be rotated to place the connectors on the right or left side. System Wattage: 27 W. Luminous flux: 2110lm. Efficacy: 78 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B50>50.000, L90>50,000. Light distribution: Direct. Control/Dimming: Trailing edge dimming. Luminiare class: Class I. Housing: Steel. Optics: Acrylic (PMMA). Height: 46 mm. Length: 1195 mm. Width: 69 mm. EAN: 7021981120269. Please note that the above has been calculated with the Norwegian energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Namsen 1200 - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.086481481488 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-06-14" - "2029-06-14"
Publication date	2024-06-14
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/products/namsen/112026/pdf/specification_112026.pdf Link to CE Declaration: https://www.sg-as.com/storage/data/702250_Namsen/50/702250_Namsen.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

NEPD-6878-6274_Namsen-1200.pdf

Original EPDs

NEPD-6878-6274_Namsen-1200.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-11-19T12:16:18
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	ed51373b-5bdb-4c09-91b2-aea6e6f8312f
Date of last revision	2024-06-13T09:49:47.4318045Z
Data set version	00.04.000
Registration authority	EPD Norway
Registration number	NEPD-6878-6274
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	30.48	0.003631	0.7591	0.1496	0.0006959	3841	0.02339	0.0744	0.07589	-3.352
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	1.093	0	0	0	-1.093	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	31.57	0.003631	0.7591	0.1496	-1.092	3841	0.02339	0.0744	0.07589	-3.352
Use of non renewable primary energy (PENRE)	Input	MJ	285.8	0.3208	7.543	13.16	0.04228	297	1.634	0.5058	0.3051	-21.34
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	6.876	0	0	0	0	0	0	-7.816	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	292.6	0.3208	7.543	13.16	0.04228	297	1.634	-7.31	0.3051	-21.34
Use of secondary material (SM)	Input	kg	0.303	0	0	0	0	0	0	0	0.001548	0.0128
Use of renewable secondary fuels (RSF)	Input	MJ	0.1972	0.00007101	0.0006673	0.004928	0.00002308	3.017	0.000837	0.001148	0.0004733	0.05268
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.01705	0.000603	0.006282	0.02641	0.00009516	7.515	0.002993	-0.00004346	0.01345	1.426
Use of net fresh water (FW)	Input	m3	0.2263	0.00003587	0.02057	0.001132	0.00001995	28.69	0.0001748	0.0006604	0.000268	-0.01216
Hazardous waste disposed (HWD)	Output	kg	0.1251	0.00002899	0.001042	0.000642	0	0.1904	0.00008429	0.0000207	0.08445	-0.01039
Non hazardous waste dispose (NHWD)	Output	kg	4.238	0.0154	0.07047	0.4065	0.1868	22.85	0.07948	0.02811	0.4519	-0.7253
Radioactive waste disposed (RWD)	Output	kg	0.0007205	0.000002105	0.000005768	0.00009034	0	0.002656	0.00001113	0.000001054	9.472E-7	-0.00002529
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.02247	0	0.1738	0	0	1.319	0.000009809	-0.0005011
Materials for energy recovery (MER)	Output	kg	0	0	0.004846	0	2.543E-7	0	0	0.1094	2.399E-7	-0.00006597
Exported electrical energy (EEE)	Output	MJ	0	0	0.0073	0	0.01068	0	0	0.168	0.00001556	-0.0001616
Exported thermal energy (EET)	Output	MJ	0	0	0.1104	0	0.1616	0	0	2.542	0.0002355	-0.002446

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	292.6	0.3208	7.543	13.16	0.04227	296.6	1.634	0.5057	0.3049	-21.34
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.00315	5.824E-7	0.000002634	0.00001777	7.355E-8	0.00162	0.000002986	3.701E-7	1.334E-7	-0.001059
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.1901	0.00006495	0.004452	0.01437	0.00001431	0.1698	0.0003106	0.0002443	0.0001176	-0.05761
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	0.0004963	0.000008455	0.0002122	0.0003306	0.3171	0.6007	0.00004474	0.00009934	0.00001452	-0.002915
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	24.31	0.02171	0.8522	0.9322	0.003022	21.73	0.1081	0.3064	0.03261	-2.154
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	24.35	0.02173	0.8526	0.9326	0.3201	22.42	0.1082	0.3066	0.03276	-2.16
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.03558	0.000007938	0.0001343	0.0004643	9.994E-7	0.08963	0.00003847	0.0001267	0.0001372	-0.002188
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	24.64	0.02173	0.8052	0.9326	0.003023	22.37	0.1082	0.3066	0.03405	-2.847
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.003226	2.037E-7	0.00001892	0.000005949	2.481E-8	0.001563	8.635E-7	0.000001591	7.81E-7	-0.000379
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.02657	0.00001279	0.0009195	0.003457	0.000004733	0.01866	0.00006146	0.00006087	0.00004392	-0.00399
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.299	0.000143	0.01013	0.0385	0.00005124	0.2429	0.0006875	0.0006599	0.0003398	-0.05023
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1024	0.00005355	0.002668	0.0104	0.00001473	0.06532	0.0002634	0.0001748	0.000131	-0.01711
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000001661	4.718E-9	1.249E-8	2.054E-7	6.38E-10	0.00000149	2.448E-8	3.396E-9	2.471E-9	-0.001142
Water (user) deprivation potential (WDP)	m3 world eqv.	537.1	0.1046	1.229	8.718	0.05358	5.17E+4	1.581	4.637	3.23	54.14

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.8951	0.001333	0.006525	0.05707	0.0001809	5.381	0	0.007143	0.002506	0.001118	-0.02881
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000001409	1.402E-9	6.012E-8	3.295E-8	2.11E-10	0.000001217	0	6.617E-9	1.546E-9	2.127E-9	-2.264E-7
Potential Soil quality index (SQP)²	unitless	83.39	0.2198	1.598	6.352	0.02836	149.4	0	1.143	0.1141	0.7159	-9.709
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000001372	2.53E-10	1.045E-8	6.573E-9	7.1E-11	0.000001519	0	1.323E-9	4.22E-8	6.63E-10	-4.67E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	6.285E-8	0	2.39E-10	0	2E-12	6.45E-8	0	0	7.15E-10	7.6E-11	-9.44E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	1713	0.2601	22.11	8.969	0.05638	1351	0	1.211	1.375	209.4	-457.6