| Key Data Set Information | |
| Location | DE |
| Geographical representativeness description | The market is Europe with a focus on Germany. |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | The scope of this LCA is cradle to gate with options, modules C1-C4 and module D. No actions are taken during User stage. |
| Technical purpose of product or process | StoColor Lotusan® is a façade paint consisting of a binder based on polymer dispersion in compliance with EN 1062-1. Inorganic and organic pigments are used for coloring and adjusting the opacity. StoColor Lotusan® consists of mineral fillers such as silica sand, water and small amounts of additives (thickeners, defoamers, wetting agents, preservatives, etc.). Drying takes place physically by evaporation of the contained water. The application process can be done by paint brush, by roller or by airless sprayer. It is produced in a plant in Stühlingen, Germany. StoColor Lotusan® has the following properties: • texture-retaining • Lotus-Effect® Technology: reduced adhesion of dirt particles and self-cleaning when exposed to rain • dirt runs off with the rain • water based The use of the product is subject to the respective national regulations at the place of use, for example the building regulations of the federal states of Germany and their respective technical regulations. The following data is required by the corresponding PCR B. Further information can be found on the Safety Data Sheet on www.sto.de. 1) This product contains substances listed in the candidate list (date: 28.11.2025) exceeding 0.1 percentage by mass: no. 2) This product contains other CMR substances in categories 1A or 1B which are not on the candidate list, exceeding 0.1 percentage by mass: yes titanium dioxide, pigment; >= 10 - < 20 CAS-nr.: 13463-67-7 3) Biocide products were added to this construction product or it has been treated with biocide products (this then concerns a treated product as defined by the (EU) Ordinance on Biocide Products No. 528/2012): yes 1,2-Benzisothiazol-3(2H)-on; in-can preservative; CAS-nr: 2634-33-5 reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one[EC no.247-500-7] and 2-methyl-2H-isothiazol-3-one[EC no.220-239-6] (3:1); in-can preservative; CAS-nr: 55965-84-9 2-methyl-2H-isothiazol-3-one; in-can preservative; CAS-nr: 2682-20-4 The material composition of the declared product is as stated below: |
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Technological representativeness | |
| Technology description including background system | The technical data stated here is relevant for the use of the declared product. Further information regarding the technical properties can be found in the Technical Data Sheet on www.sto.de or the country specific product page. |
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-12-05T12:52:18 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | eaa5491a-d598-42b7-8fc1-1b3667fdee23 |
| Date of last revision | 2025-12-05T07:02:45.0880937Z |
| Data set version | 00.02.001 |
| Registration authority | |
| Registration number | NEPD-14361-14757 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Indicators of life cycle