Process Data set: Junistar Eco IsoSafe (en)

Process Data set: Junistar Eco IsoSafe (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe.
Reference year	2024
Name	Junistar Eco IsoSafe
Technical purpose of product or process	Cost-efficient downlight for indoor use with a 42° beam angle and 30° tilt function. A flexible diameter of Ø68-83mm makes Junistar Eco a great choice for refurbishing older ceilings. Junistar Eco IsoSafe is testet to be 100% airtight against plaster board ceilings. Supplied as an 8-pack incl drivers. Our IsoSafe product can be mounted directly in insulation. IP44 protection rating. Wattage: 6W. Luminous flux: 580lm. Efficacy: 83 lm/W. Colour temperature: 2700K. Colour rendering: Ra 98. Control/Dimming type: Trailing edge dimming. Contains light source of energy class: F. Housing: Aluminium. Colour: Black (RAL 9004). Optics: Tempered glass. Height: 40 mm. Diameter: 90 mm. EAN: 7021989052166. The EPD also covers the following products: EAN: 7021989052159 - Junistar Eco IsoSafe White DimToWarm 510lm 2000-2800K Ra>95 Trailing edge dimming EAN: 7021989052173 - Junistar Eco IsoSafe Black DimToWarm 470lm 2000-2800K Ra>95 Trailing edge dimming EAN: 7021989052135 - Junistar Eco IsoSafe White 520lm 2700K Ra 98 Trailing edge dimming EAN: 7021989052142 - Junistar Eco IsoSafe White 550lm 3000K Ra 98 Trailing edge dimming EAN: 7021989052241 - Junistar Eco IsoSafe Black 520lm 3000K Ra 98 Trailing edge dimming
Classification	Class name : Hierarchy level EPDNorge: Construction / Electronic and electrical components and products
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Junistar Eco IsoSafe - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.025462962965 kg
Time representativeness
Data set valid until	2029
Time representativeness description	"2024-04-19" - "2029-04-19"
Publication date	2024-04-19
Technological representativeness
Technology description including background system	Link to the CE Declaration on our website: https://www.sg-as.com/storage/data/700861_Junistar%20ECO/50/700861_Junistar%20Eco%20Isosafe.pdf Link to product data on our website: https://www.sg-as.com/products/junistar-eco-isosafe/905216

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

NEPD-6441-5706_Junistar-Eco-IsoSafe.pdf

Original EPDs

NEPD-6441-5706_Junistar-Eco-IsoSafe.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2024-11-19T12:20:26
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	e96b7c7d-7e73-4033-9335-571bdf42fd50
Date of last revision	2024-04-15T13:17:02.9407678Z
Data set version	00.05.000
Registration authority	EPD Norway
Registration number	NEPD-6441-5706-EN
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	7.123	0.0005929	0.1293	0.02193	0.0002049	1337	0.003986	0.1119	0.02152	-0.8247
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	0.451	0	0	0	-0.451	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	7.574	0.0005929	0.1293	0.02193	-0.4508	1337	0.003986	0.1119	0.02152	-0.8247
Use of non renewable primary energy (PENRE)	Input	MJ	72.56	0.04142	1.284	2.029	0.01245	103.4	0.2785	0.6841	0.08835	-4.969
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	2.454	0	0	0	0	0	0	-2.921	0	0
Total use of non renewable primary energy resource (PENRT)	Input	MJ	75.02	0.04142	1.284	2.029	0.01245	103.4	0.2785	-2.237	0.08835	-5.235
Use of secondary material (SM)	Input	kg	0.1016	0	8.979E-7	0	0.00001262	0	0	0.00003171	0.0006445	0.03635
Use of renewable secondary fuels (RSF)	Input	MJ	0.1144	0.00002121	0.0001129	0.0007147	0.000006796	1.05	0.0001426	0.002336	0.0001221	0.002881
Use of non renewable secondary fuels (NRSF)	Input	MJ	0.03336	0.00007584	0.001067	0.003969	0.00002802	2.616	0.0005099	-0.0002323	0.004289	0.05467
Use of net fresh water (FW)	Input	m3	0.06075	0.000004429	0.003502	0.0001654	0.000005873	9.989	0.00002978	0.0006582	0.00008635	-0.003675
Hazardous waste disposed (HWD)	Output	kg	0.02963	0.000002136	0.0001559	0.00009603	0.00005493	0.0663	0.00001436	0.00006154	0.02248	-0.001688
Non hazardous waste dispose (NHWD)	Output	kg	0.7809	0.002014	0.01177	0.05541	0.0006221	7.954	0.01354	0.01402	0.08487	-0.08673
Radioactive waste disposed (RWD)	Output	kg	0.0001755	2.821E-7	9.756E-7	0.00001395	8.23E-8	0.0009246	0.000001897	9.602E-7	2.199E-7	-0.00001317
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0.001844	0	0.0001859	0	0.05116	0	0	0.123	0.0004458	0.03381
Materials for energy recovery (MER)	Output	kg	0.00006184	0	6.339E-9	0	7.488E-8	0	0	0.04901	0.000005224	0.000009117
Exported electrical energy (EEE)	Output	MJ	0.0004983	0	2.549E-8	0	0.003146	0	0	0.052	0.00004882	-0.0001371
Exported thermal energy (EET)	Output	MJ	0.007538	0	3.856E-7	0	0.04759	0	0	0.7867	0.0007386	-0.002074

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	74.99	0.04142	1.284	2.028	0.01245	103.3	0.2784	0.6839	0.08829	-4.969
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.00147	7.567E-8	4.469E-7	0.000002539	2.166E-8	0.0005641	5.087E-7	5.455E-7	3.935E-8	-0.0004974
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.04424	0.000007873	0.0007579	0.002582	0.000004213	0.0591	0.00005292	0.000264	0.00003579	-0.02231
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.05934	0.000001134	0.00003608	0.00004997	0.09337	0.2091	0.000007622	0.002764	0.00118	-0.0009715
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	6.24	0.002739	0.1432	0.1455	0.0008897	7.564	0.01842	0.2088	0.01287	-0.4045
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	6.194	0.002741	0.1433	0.1455	0.09426	7.804	0.01843	0.2116	0.01409	-0.4059
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.01388	9.75E-7	0.00002285	0.00007586	2.943E-7	0.0312	0.000006554	0.00007224	0.00003975	-0.000463
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	5.897	0.002741	0.1352	0.1455	0	7.789	0.01843	0.211	0.004787	-0.4384
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.0006511	2.189E-8	0.000003223	8.793E-7	7.305E-9	0.000544	1.471E-7	0.000003335	2.574E-7	-0.0001267
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.007183	0.000001558	0.0001564	0.0006254	0.000001393	0.006496	0.00001047	0.00005699	0.00001459	-0.001182
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.07968	0.00001742	0.001723	0.006962	0.00001509	0.08455	0.0001171	0.0006342	0.00009727	-0.01609
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.02668	0.000006674	0.0004539	0.001862	0.000004336	0.02274	0.00004487	0.0001748	0.00003786	-0.004723
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000005385	6.19E-10	2.109E-9	3.184E-8	1.88E-10	5.187E-7	4.171E-9	1.393E-8	6.85E-10	-0.0003319
Water (user) deprivation potential (WDP)	m3 world eqv.	169.6	0.04006	0.2064	1.245	0.01577	1.8E+4	0.2693	3.766	0.9102	-0.08086

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	0.219	0.000181	0.001107	0.008789	0.00005326	1.873	0	0.001217	0.0032	0.0003006	-0.01532
Potential incidence of disease due to PM emissions (PM)²	disease incidence	3.511E-7	1.68E-10	1.024E-8	4.592E-9	6.2E-11	4.237E-7	0	1.127E-9	3.129E-9	5.61E-10	-5.121E-8
Potential Soil quality index (SQP)²	unitless	23.09	0.02897	0.2715	0.8903	0.00835	52	0	0.1948	0.234	0.2299	-3.731
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	2.588E-7	3.1E-11	1.774E-9	9.4E-10	2.1E-11	5.289E-7	0	2.25E-10	2.02E-8	2.7E-10	-5.508E-8
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	8.59E-9	0	4.1E-11	0	0	2.245E-8	0	0	4.36E-10	2.3E-11	-1.191E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	406.4	0.0307	3.763	1.354	0.0166	470.4	0	0.2064	2.763	22.99	-162.9