Process Data set: Hurdal 1500 Pir (en)

Process Data set: Hurdal 1500 Pir (en) en

Process information

Key Data Set Information
Location	CN
Geographical representativeness description	Nordic + Northwestern Europe
Reference year	2025
Name	Hurdal 1500 Pir
Technical purpose of product or process	Hurdal is a highly efficient surface mounted luminaire for a wide variety of applications. It is easily installed directly in the ceiling or on the wall and has cable entrance in both ends in addition to two in the center. The luminaire is IP44 with steel base and aluminium end caps. Hurdal is available in three lengths. Dip switches makes it possible to adjust the light level. System Wattage: 31.0 W. Luminous flux: 4640lm lm. Efficacy: 150 lm/W. Colour temperature: 3000K. Colour rendering: Ra>80. MacAdams factor: SDCM: 3. Lifetime: L80/B20>100,000, L90>50,000. Light distribution: Direct. Control/Dimming: PIR Sensor. Luminiare class: Class I. Housing: Steel. Optics: UV-stabilized polycarbonate. Height: 76.0mm. Length: 1500.0 mm. Width: 72.0 mm. EAN: 7021981131203. The EPD also covers the following products: EAN: 7021981131234 - HURDAL 1500 4000K PIR Please note that the above has been calculated with the Norwegian Energy-mix. If you want an EPD with a specific energy-mix, please send us a request.
General comment on data set	Data quality: Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) can be excluded. These cut-off criteria do not apply for hazardous materials and substances.
Copyright	Yes
Owner of data set	SG Armaturen AS
Quantitative reference
Reference flow(s)	Hurdal 1500 Pir - 1.0 * 1.0 Stück (Number of pieces)
Biogenic carbon content	Carbon content (biogenic): 0.0 kg Carbon content (biogenic) - packaging: 0.292982055422 kg
Time representativeness
Data set valid until	2030
Time representativeness description	2025 - 2030-11-17
Technological representativeness
Technology description including background system	Link to product data on our website: https://www.sg-as.com/int/en/pdf/article/113120/703030/specification_113120.pdf Link to CE Declaration: https://www.sg-as.com/file/techfile/32E6/Hurdal.pdf

Modelling and validation

Subtype

specific dataset

LCA methodology report

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data sources, treatment and representativeness

Documentation of data quality management

IBU PCR - Part B for luminaires, lamps, and components for luminaires

Data source(s) used for this data set

ecoinvent database (all versions)

Original EPDs

NEPD-14080-14422_Hurdal-1500-Pir.pdf

Completeness

Validation

Type of review
Independent external review

Reviewer name and institution
Vito D’Incognito

Compliance Declarations

Compliance

Compliance system name

EN 15804+A2

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 14025

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Compliance

Compliance system name

ISO 21930

Approval of overall compliance

Fully compliant

Nomenclature compliance

Fully compliant

Methodological compliance

Fully compliant

Review compliance

Fully compliant

Documentation compliance

Fully compliant

Quality compliance

Fully compliant

Administrative information

Data generator
Data set generator / modeller	LCA.no AS
Data entry by
Time stamp (last saved)	2025-11-18T17:30:57
Data set format(s)	ILCD format EPD Data Format Extensions v1.2
Publication and ownership
UUID	e8300875-4931-4ab5-aef2-09face7c6e54
Date of last revision	2025-11-14T15:18:19.2153651Z
Data set version	00.02.003
Registration authority	EPD Norway
Registration number	NEPD-14080-14422
Owner of data set	SG Armaturen AS
Copyright	Yes
License type	Free of charge for all users and uses
Access and use restrictions	None
Publisher	EPD Norway

Environmental indicators

Indicators of life cycle

Indicator	Direction	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Use of renewable primary energy (PERE)	Input	MJ	48.26	0.01229	0.7016	0.1976	0.002327	4362	0.02368	0.1375	0.119	-6.523
Use of renewable primary energy resources used as raw materials (PERM)	Input	MJ	7.3	0	0	0	-7.299	0	0	0	0	0
Total use of renewable primary energy resource (PERT)	Input	MJ	55.56	0.01229	0.7016	0.1976	-7.296	4362	0.02368	0.1375	0.119	-6.523
Use of non renewable primary energy (PENRE)	Input	MJ	412.5	1.086	8.218	17.4	0.1413	337.3	2.092	0.9678	0.4571	-21.46
Use of non renewable primary energy resources used as raw materials (PENRM)	Input	MJ	18.29	0	0	0	0	0	0	-19.76	0	0.0009834
Total use of non renewable primary energy resource (PENRT)	Input	MJ	430.8	1.086	8.218	17.4	0.1413	337.3	2.092	-18.79	0.4571	-21.46
Use of secondary material (SM)	Input	kg	1.245	0	0	0	0	0	0	0	0.002714	0.02119
Use of renewable secondary fuels (RSF)	Input	MJ	2.326	0.0002404	0.0003238	0.006385	0.00007717	3.426	0.0004632	0.002162	0.0005386	0.02711
Use of non renewable secondary fuels (NRSF)	Input	MJ	2.044	0.002041	0.003893	0.03479	0.0003181	8.534	0.003933	-0.00006708	0.02364	0.5012
Use of net fresh water (FW)	Input	m3	0.3647	0.0001214	0.003468	0.001517	0.00006668	32.58	0.000234	0.001582	0.0003658	-0.01953
Hazardous waste disposed (HWD)	Output	kg	0.1645	0.00009814	0.0007045	0.0008832	0	0.2163	0.0001891	0.00003497	0.1357	-0.008836
Non hazardous waste dispose (NHWD)	Output	kg	5.155	0.05213	0.1041	0.5515	0.6245	25.95	0.1004	0.04935	0.598	-0.5409
Radioactive waste disposed (RWD)	Output	kg	0.001083	0.000007127	0.0000137	0.0001191	0	0.003016	0.00001373	0.000001869	0.000001105	-0.00004702
Components for re-use (CRU)	Output	kg	0	0	0	0	0	0	0	0	0	0
Materials for recycling (MFR)	Output	kg	0	0	0.05958	0	0.5809	0	0	0.9656	0.00003039	-0.0008292
Materials for energy recovery (MER)	Output	kg	0	0	0.004325	0	0.03082	0	0	0.3394	7.432E-7	-0.0001091
Exported electrical energy (EEE)	Output	MJ	0	0	0.006645	0	0.03572	0	0	0.5211	0.00004822	-0.0002674
Exported thermal energy (EET)	Output	MJ	0	0	0.1005	0	0.5404	0	0	7.883	0.0007295	-0.004046

Core environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
Abiotic depletion potential - fossil resources (ADPF)	MJ	430.6	1.086	8.218	17.4	0.1413	336.8	2.092	0.9676	0.4568	-21.46
Abiotic depletion potential - non-fossil resources (ADPE)	kg Sb-eqv.	0.009981	0.000001972	0.000002126	0.00002387	2.459E-7	0.00184	0.000003799	6.708E-7	2.081E-7	-0.001668
Acidification potential, Accumulated Exceedance (AP)	mol H+ eqv.	0.3288	0.0002199	0.004689	0.01825	0.00004784	0.1928	0.0004236	0.0005169	0.00018	-0.08915
Global Warming Potential - biogenic (GWP-biogenic)	kg CO2 eqv.	-0.8622	0.00002862	0.0001353	0.0004379	0.9944	0.6821	0.00005515	0.001144	0.0004852	-0.004011
Global Warming Potential - fossil fuels (GWP-fossil)	kg CO2 eqv.	35.46	0.0735	0.9127	1.229	0.0101	24.67	0.1416	0.8879	0.06916	-1.924
Global Warming Potential - total (GWP-total)	kg CO2 eqv.	34.68	0.07355	0.9129	1.23	1.005	25.46	0.1417	0.8893	0.06988	-1.932
Global Warming Potential - land use and land use change (GWP-luluc)	kg CO2 eqv.	0.08329	0.00002687	0.00009877	0.0006047	0.000003341	0.1018	0.00005178	0.000229	0.000239	-0.003634
Global warming potential except emissions and uptake of biogenic carbon (GWP-IOBC/GHG)	kg CO2 eqv.	35.74	0.07355	0.8679	1.23	0.01011	25.41	0.1417	0.8889	0.06988	-1.893
Eutrophication potential - freshwater (EP-freshwater)	kg P eqv.	0.005461	6.894E-7	0.00001711	0.000008014	8.295E-8	0.001774	0.000001328	0.000002987	0.000001299	-0.0005513
Eutrophication potential - marine (EP-marine)	kg N eqv.	0.04103	0.00004329	0.001065	0.004382	0.00001582	0.02119	0.00008341	0.0001453	0.00008585	-0.005029
Eutrophication potential - terrestrial (EP-terrestrial)	mol N eqv.	0.5694	0.0004841	0.01174	0.0488	0.0001713	0.2758	0.0009327	0.001554	0.0004897	-0.06767
Photochemical Ozone Creation Potential (POCP)	kg NMVOC eqv.	0.1797	0.0001813	0.004165	0.01323	0.00004924	0.07417	0.0003493	0.0004029	0.0002034	-0.0205
Depletion potential of the stratospheric ozone layer (ODP)	kg CFC 11 eqv.	0.000006573	1.598E-8	2.768E-8	2.707E-7	2.133E-9	0.000001692	3.08E-8	6.822E-9	3.435E-9	-0.003557
Water (user) deprivation potential (WDP)	m3 world eqv.	964.1	0.3541	0.6685	11.24	0.1791	1313	0.6823	8.806	3.058	1.732

Additional environmental impact indicators

Indicator	Unit	Raw material supply A1	Transport A2	Manufacturing A3	Transport A4	Installation A5	Operational energy use B6	De-construction C1	Transport C2	Waste processing C3	Disposal C4	Recycling Potential D
¹This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
²The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP)¹	kBq U235 eqv.	1.396	0.004513	0.01053	0.07527	0.0006047	6.11	0	0.008697	0.004726	0.001376	-0.05432
Potential incidence of disease due to PM emissions (PM)²	disease incidence	0.000002178	4.752E-9	5.676E-8	4.511E-8	7.08E-10	0.000001382	0	9.156E-9	3.131E-9	3.304E-9	-2.534E-7
Potential Soil quality index (SQP)²	unitless	120.7	0.7441	1.63	8.563	0.09481	169.6	0	1.434	0.2146	1.19	-17.45
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc)²	CTUh	0.000002149	8.61E-10	3.364E-8	8.934E-9	2.37E-10	0.000001725	0	1.665E-9	7.505E-8	1.023E-9	-3.069E-7
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c)²	CTUh	6.097E-8	0	2.43E-10	0	6E-12	7.324E-8	0	0	1.279E-9	1.27E-10	-8.32E-9
Potential Comparative Toxic Unit for ecosystems (ETP-fw)²	CTUe	3114	0.8804	21.34	11.96	0.1885	1534	0	1.696	3.191	158.3	-694.9