Process information
| Key Data Set Information | |
| Location | SE |
| Geographical representativeness description | Mainly Europe, but is available worldwide. |
| Reference year | 2024 |
| Name |
|
| Use advice for data set | Metal components are purchased as pre-manufactured components. Wooden components are manufactured at our production site in Kinnarp, where final assembly also takes place. The product is thereafter shipped from Kinnarp to the customer. For the variants and options connected to this EPD, some metal components are manufactured at our production site in Jönköping. Some plastic components are manufactured at our production site in Skillingaryd, where the fabric for the sound absorbent also is being processed. The remainder of the metal and plastic components are purchased as pre-manufactured components. For the variants and options connected to this EPD, some metal components are manufactured at our production site in Jönköping. Some plastic components are manufactured at our production site in Skillingaryd, where the fabric for the sound absorbent also is being processed. The remainder of the metal and plastic components are purchased as pre-manufactured components. The flow chart below illustrates the system boundaries of the analysis. |
| Technical purpose of product or process | Space S2P800DO in laminate finish with doors and one wooden shelf. Underframes and wall hanging brackets available as options. A practical cupboard with door that’s our most popular storage solution. There’s a large selection of carcasses to choose from in different heights, widths and depths. Link modules together to extend the width or stack them on top of each other to extend the height. Select both an exterior and interior finish to get an organised and functional storage unit that’s also a well-designed solution. The carcasses have concealed hinges for a cleaner look. The hinges also ensure soft, quiet closing of the cabinet fronts. The storage unit can also be combined with locks if necessary. There are several underframes to choose from, and with the help of leg reduction, you get a stylish and clean expression when several units are placed next to each other. Read more: https://www.kinnarps.com/products/storage/space-cabinet-with-doors/?pr=S2P800%20DO%20SI%20W81%20PLBA Choose from different materials and colours. The versatile and functional Space storage range consists of a large selection of well-designed modules in different materials, colours and finishes. They can be connected and customised to your needs, based on the functionality and look you want. This EPD includes the following variants: Space Cabinet - S2P800DO - Veneer Space Cabinet - S3P800DO - Laminate Space Cabinet - S4P800DO - Laminate Space Cabinet - S5P800DO - Laminate Space Cabinet - WS2P800DOWH - Laminate, wall hanged Space Cabinet with sliding doors - S2P800SDI - Laminate Included options are: Wooden plinth, PLBAW, 800x400 mm Metal plinth, PLBA, 800x400 mm Metal leg frame, LR, 800x400 mm Mobile underframe, MOB, 800x400mm Wall hanging kit for Space Sound Absorbent Space, BAFA - Wool blend fabric |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2029 |
| Time representativeness description | "2024-09-06" - "2029-09-06" |
| Technological representativeness | |
| Technology description including background system | The Space series is tested and compliant with the following certifications and standards: Certifications: Swedish Möbelfakta, NF Environnement, NF OEC, GS. Fullfilled technical standards: EN 16121:2013 + A1 2018 L1 Non-domestic storage furniture - Requirements for safety, strength, durability and stability. Fullfilled emission tests: Indoor Air Comfort Gold, ANSI/BIFMA M7.1_2011, M1. |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2024-11-19T17:40:35 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | e5572e64-07a6-483e-b654-d3cf843731a9 |
| Date of last revision | 2024-09-04T11:57:46.2220563Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-7477-6864 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle