Close Go back Collapse all sections
Process Data set: CEM II/B-M (P-LL) Bascement Plus Slite (en) en

A more recent version of this data set exists in the database.

Most recent version of this data set:00.03.002

Key Data Set Information
Location SE
Geographical representativeness description Sweden (Europe)
Reference year 2025
Name
CEM II/B-M (P-LL) Bascement Plus Slite
Use advice for data set From raw material extraction to market
Technical purpose of product or process Bascement Plus is a Portland-composite cement for general purpose. The application of cement has a large variety. It is mainly used as a binder for concrete and mortar. The application in concrete is regulated in /EN 206/. According to this standard, general suitability is established for cement conforming to /EN 197-1/ CEM II/B-M (P-LL)
Classification
Class name : Hierarchy level
  • EPDNorge: Construction / Cement and lime
General comment on data set Data quality Specific data for the product composition are provided by the manufacturer. The data represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on EPDs according to EN 15804 and different LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation Allocation is carried out in accordance with the provisions of EN 15804. Incoming energy, water consumption, and in-house waste generation are distributed equally among all products using mass allocation. The standard’s guidelines are also applied to co-products. If the allocation factor is 1% or less, economic allocation is deemed negligible and therefore omitted. Additionally, where relevant, the processing and transportation of co-products are included in the analysis. Cut-off criteria All major raw materials and all the essential energy are included. The production processes for raw materials and energy flows with very small amounts (less than 1%) may not be included. These cut-off criteria do not apply for hazardous materials and substances.
Copyright Yes
Owner of data set
Quantitative reference
Reference flow(s)
Biogenic carbon content
  • Carbon content (biogenic): 1.0 kg
  • Carbon content (biogenic) - packaging: 1.0 kg
Time representativeness
Data set valid until 2030
Time representativeness description 2025-06-23 - 2030-06-23
Technological representativeness
Technology description including background system More information at https://www.cement.heidelbergmaterials.se/sv/bascement-plus

Indicators of life cycle

IndicatorDirectionUnit Production
A1-A3
 Transport
A4
Input
  • 243.4
  • 0.2866
Input
  • 0
  • 0
Input
  • 243.4
  • 0.2866
Input
  • 2957
  • 58.13
Input
  • 0.6502
  • 0
Input
  • 2958
  • 58.13
Input
  • 19.18
  • 0
Input
  • 597.3
  • 0.01102
Input
  • 813.5
  • 0.0753
Input
  • 1.006
  • 0.001638
Output
  • 20.83
  • 0.001861
Output
  • 116.9
  • 0.08204
Output
  • 0.02253
  • 0.0004102
Output
  • 0
  • 0
Output
  • 0.6266
  • 0
Output
  • 0.001391
  • 0
Output
  • 0.001659
  • 0
Output
  • 0.02489
  • 0

IndicatorUnit Production
A1-A3
 Transport
A4
Abiotic depletion potential - fossil resources (ADPF)
  • 4189
  • 58.13
Abiotic depletion potential - non-fossil resources (ADPE)
  • 0.1093
  • 0.00001905
Acidification potential, Accumulated Exceedance (AP)
  • 0.9945
  • 0.136
Global Warming Potential - biogenic (GWP-biogenic)
  • 0.05753
  • 0.00092
Global Warming Potential - fossil fuels (GWP-fossil)
  • 489.5
  • 4.512
Global Warming Potential - total (GWP-total)
  • 489.7
  • 4.512
Global Warming Potential - land use and land use change (GWP-luluc)
  • 0.07257
  • 0.00174
  • 490.1
  • 4.512
Eutrophication potential - freshwater (EP-freshwater)
  • 0.02291
  • 0.0000126
Eutrophication potential - marine (EP-marine)
  • 0.3537
  • 0.03047
Eutrophication potential - terrestrial (EP-terrestrial)
  • 4.044
  • 0.3428
Photochemical Ozone Creation Potential (POCP)
  • 1.095
  • 0.08878
Depletion potential of the stratospheric ozone layer (ODP)
  • 0.000001057
  • 8.79E-7
Water (user) deprivation potential (WDP)
  • 65.28
  • 12.92

IndicatorUnit Production
A1-A3
 Transport
A4
1This impact category deals mainly with the eventual impact of low dose ionizing radiation on human health of the nuclear fuel cycle. It does not consider effects due to possible nuclear accidents, occupational exposure nor due to radioactive waste disposal in underground facilities. Potential ionizing radiation from the soil, from radon and from some construction materials is also not measured by this indicator.
2The results of this environmental impact indicator shall be used with care as the uncertainties on these results are high or as there is limited experiences with the indicator.
Potential Human exposure efficiency relative to U235 (IRP) 1
  • 105.3
  • 0.2529
Potential incidence of disease due to PM emissions (PM) 2
  • 0.000008293
  • 0
Potential Soil quality index (SQP) 2
  • 1.39E+3
  • 7.413
Potential Comparative Toxic Unit for humans - non-cancer effects (HTP-nc) 2
  • 0.000001087
  • 0
Potential Comparative Toxic Unit for humans - cancer effects (HTP-c) 2
  • 1.669E-7
  • 0
Potential Comparative Toxic Unit for ecosystems (ETP-fw) 2
  • 1247
  • 30.16