Process Data set: Roth QuickTemp Heat Distribution Plate (en) en
Process information
| Key Data Set Information | |
| Location | DK |
| Geographical representativeness description | Denmark, Sweden, Norway, Finland & UK |
| Reference year | 2025 |
| Name |
|
| Use advice for data set | Module A1: Packaging has been included by average use of packaging pr. 1 tonnes of product. Module A4: The transportation distances provided in this EPD are derived from precise data concerning the distances between production facility and various sales departments in different countries. Distribution from each of the sales departments to the end customers a distance of 300 km* is assumed. *Transportation by truck is assumed on a distribution of 80% EURO 6 and 20% EURO 5, based on data from the company's own logistics provider. Module A5/C1: Manual installation and demolition has been assumed. Module C2: The estimated transportation distance to the waste handling facility in this EPD is 100 km, assuming the use of a truck as the transport method. |
| Technical purpose of product or process | Roth QuickTemp Heat Distribution Plates are designed for the installation of underfloor heating systems in wooden floor constructions and intermediate floor structures, either with formwork or in grooved chipboard with underlying insulation as well as Roth QuickTemp Universal board EPS 30. The boards are made of aluminium and are designed to accommodate both 16 mm and 20 mm pipe. It is available in three different thicknesses. The appropriate thickness is selected based on the required heat output and comfort level. 0.3 mm: Suitable for standard heating requirements. 0.5 mm and 0.7 mm: Recommended for higher heat output and enhanced comfort demands. |
| Classification |
Class name
:
Hierarchy level
|
| General comment on data set | Data quality: Specific data for the product composition are provided by the manufacturer. They represent the production of the declared product and were collected for EPD development in the year of study. Background data is based on registered EPDs according to EN 15804, Ostfold Research databases, ecoinvent and other LCA databases. The data quality of the raw materials in A1 is presented in the table below. Allocation: The allocation is made in accordance with the provisions of EN 15804. Incoming energy and water and waste production in-house is allocated equally among all products through mass allocation. Effects of primary production of recycled materials is allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production processes for raw materials and energy flows with very small amounts (less than 1%) are not included when specific information are missing. These cut-off criteria do not apply for hazardous materials and substances. |
| Copyright | Yes |
| Owner of data set | |
| Quantitative reference | |
| Reference flow(s) |
|
| Biogenic carbon content |
|
| Time representativeness | |
| Data set valid until | 2030 |
| Time representativeness description | 2025-06-11 - 2030-06-11 |
| Technological representativeness | |
| Technology description including background system | For dimension and weight of the different variants see "Additional technical information". |
Modelling and validation
| Subtype | specific dataset | ||||
| LCA methodology report | |||||
| Data sources, treatment and representativeness | |||||
| Documentation of data quality management | |||||
| Data source(s) used for this data set | |||||
| Completeness | |||||
| Validation | |||||
| |||||
| Compliance Declarations | |||||
| Compliance |
Compliance system name
EN 15804+A2
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
| Compliance |
Compliance system name
|
Approval of overall compliance
Fully compliant |
Nomenclature compliance
Fully compliant |
Methodological compliance
Fully compliant |
Review compliance
Fully compliant |
Documentation compliance
Fully compliant |
Quality compliance
Fully compliant |
Administrative information
| Data generator | |
| Data set generator / modeller |
|
| Data entry by | |
| Time stamp (last saved) | 2025-08-29T13:45:12 |
| Data set format(s) | |
| Publication and ownership | |
| UUID | e47158ad-85ea-484f-9220-45b6df2b6c8c |
| Date of last revision | 2025-06-06T14:20:06.5777354Z |
| Data set version | 00.03.000 |
| Registration authority | |
| Registration number | NEPD-11349-11293 |
| Owner of data set | |
| Copyright | Yes |
| License type | Free of charge for all users and uses |
| Access and use restrictions | None |
Environmental indicators
Indicators of life cycle